Likes
Comments
Share
@J4kpvp
Follow
Hello again:) This week was as nice and easy as the weeks before. I have some humidity issues but I think I have a solution, let‘s see in the next days. Also there is still no need for fertiliser yet in my opinion, the leaves still look really nice, even a bit too dark on the tropical cookies (back right) I also did the second dose of nematodes this week and I‘m also upping the water quite a lot, I‘m already at 3l per pot every few days and they take it without any problem :) They also grew very evenly this time except for the watermelon weddingcake in front left, which stayed a little smaller compared to the massive chocolate sherbet in the back left Looking forward to seeing the buds build up now:)
Likes
3
Share
@Cannabuss
Follow
Took off excess lower bud sites and removed fan leaves. The plant is looking fantastic and plumping up nicely. Tops are already looking chunky and the light penetration is much better now after defoliating some more. I have turned the light up to 50% and have raised it to its final height. Luckily the stretching wasn’t too bad and didn’t push the light up too much.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
73
Share
@Andres
Follow
patience .... she has a mint smell on her stem and smells of forest too ... she is taking shape with her buds ... she looks great outdoors ... she continues with her natural fertilizers .... every 10 to 15 days and these are their results ... I am struggling with some worms in the leaves of my plants but I am dedicated to finding one by one the worms ...
Likes
44
Share
@Aedaone
Follow
The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had sunshine and clear skies until the afternoon. We had clouds roll in and about 4:00 P.M. a severe thunderstorm hit. There was high wind, heavy rain, and grape sized hail. Fortunately the hail lasted only a few minutes. Day 2 we have clear skies and sunshine. The temperature is mid 70's. Day 3 we had rain and thunderstorms through the previous night and into the morning. We had sunshine, clear skies, and temperatures in the upper 70's. That was followed by severe thunderstorms, rain, and a touch of hail from 4p.m. to 6p.m. These were topped and had thr bottom nodes removed. Day 4 we had relief from the rain. Temperatures were in the mid to upper 70's and lots of sunshine. We have a few days of sunshine in the forecast 🙏 Day 5 we had lots of sunshine and clear skies. Highs in the upper 70's and 49% humidity. We needed the dryness. 🙏. Day 6 we had clear skies and sunshine. Temperatures were in the mid to upper 70's. Day 7 we had partly cloudy skies and temps in the middle 70's. This week was a success. The plants doubled in height and thankfully didn't have any serious damage from the hail.
Likes
30
Share
This week has been such a gift! I have learned so much about proper care for a plant I had no idea how little I knew sitting down and observing these majestic trees produce such a potent flower has really humbled me. Premium cultivars strain has shown resilient and self sustaining easy to grow traits that it is hard to mess up. (Which I’ve done a few times lol) Notice the trichomes (I put the zoom lens on and got up in there so they could be better seen the bud itself is slathered in them ! This is going to be an amazing smoke! Also looking at the structure of the bud it’s self it has volume very full bodied bracts with pistils throughout It’s just an all-around beautiful thing to observe
Likes
5
Share
Week 7 here and so far so good. Next week I'll add Ripen to my feeding schedule
Likes
3
Share
It is a fast strain, but small in size, even outside. Very sensitive to pests despite the top barrier pesticide. I would not grow it again.
Likes
40
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone ☺️. This week she made a nice boost. I have decided not to use any more training and to send them into bloom next week :-). This week it was poured twice with 1.2 l each. The tent was cleaned and the humidifier was refilled. I wish you all a lot of fun with the update. Stay healthy 🙏🏻 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 .
Likes
25
Share
@Kakui
Follow
Veg22, riego con 3.0 EC y pH 5.9, drenaje promedio de 5.8 pH y 2.6 EC(muy bien), primer riego con Sensizym para limpiar un poco las raíces, y este será el último riego de vegetación con Voodoo Juice, Tarantula y Piranha. Se hizo una pequeña defoliación de las hojas abanico más bajas y se volvió a ajustar el LST, ya van tomando la forma final. Veg23, creciendo bien. Veg24, se mide la temperatura de las hojas 22°C y se compara con la temperatura del indoor 23°C, con una humedad de 50% RH, la calculadora arroja un valor de VPD=1.24 kpa, lo que está dentro del rango óptimo. Veg25, hoy toca una pequeña defoliación y probaré también hacer un último apical en 2 o 3 plantas a modo de prueba. Al final, tomé un gran riesgo, y hice varios apicales extra y una defoliación más grande de lo que tenía en mente, tengo fe que resultará bien 😎👌 Veg27, riego con 0.8 EC y pH 6.0, drenaje de 6.0 pH y EC 2.0, se están alimentando y creciendo bien, quedan casi 2 semanas para pasar el fotoperiodo a 12/12, espero que crezcan suficiente para esa fecha. Veg28, un par de hojas de 2 plantas presentan mordidas tipo oruga, revise y no encontré nada, aplique spray insecticida, espero no siga pasando. A parte de eso siguen creciendo bien, quedan un poco más de 10 días para el paso a 12/12.
Likes
422
Share
Hi everyone. Welcome to my🍌💜👊 week update. Hope everyone keeping well and having a great week. Daily updates and uploads so if week not over yet. Please revisit to see full week content😊 Thank you all for such amazing support 😊🤗💜 So far everything is going great. No issues at all. Both girls started preflower on Tuesday and already I can see that they started stretching nicely. Scrog net will be installed by the end of this week. Week 5 13-19 Nov. 13/11 day 36 First runoff experience for girls. Loaded both pots with approx. 2.5 ltr each in 4 stages of 500-700ml. Runoff 100-150ml from each. Runoff PH 5.9. Nutrients for this watering were same as on previous week and added only calmag. Next watering possibly Friday but with new measurements. 14/11 day 37 Both 🍌💜👊 girls started preflower on same day. Xena is catching up quick to her larger sister and possibly soon they will be sharing this growing space 50/50 15-16/11 days 38-39 Just happy and healthy days 😁 nice steady growth. 17/11 day 40 Second watering for this week. 5.5l beetwen both. Runoff Ph 6.1 19/11 day 42 Most busiest day so far. Both girls got very bushy in last few days and they stretched enough to install scrog net. Before installing net applied selective defoliation on both girls. 8-10 fan leaves from each. It's the end of this amazing week 😁 Thank you all again for such a great support 🤗✌️💚
Likes
2
Share
Hi GD Buddies. Another week down on this new strain for me to enjoy and wow am I enjoying watching theses gorgeous flowers flourish. They are creating very hairy and dense looking bud structures that have begun forming up into longer stem filling flowers that are also really kicking out a nice heavy scent of quailty Terps and aromas too. The glow space absolutely pongs of weed and my filters are throwing their hands up in the air in submission !!!. What a beautiful profile it is leaving behind too. One of the plants is beginning to show more colouring on the pistols now so I expect thosnwill begin a new flush of pure white ones to swrll the duds even more . The contrasts are so aesthetic looking over the buds and I can see why this strain was put forward by the guys at Exotic to try. A beautiful choice guys and i look forward to seeing this strain complete its processes and am excited to sample the finished result.
Likes
6
Share
What can I say in the end except that I am very happy that everything went well again and now I am enjoying the wonderful smoke of Cookies Gelato. Here is a quick overview of this cycle. 21/06/2022 - planting 14/09/2022 - harvest 3 weeks of vegetation 8 weeks of flowering 15 days of drying 60 years. total yield 1 Cookies Gelato Auto plant After harvesting, the plant was dried for 15 days, after which I trimmed the flowers and put them in jars to ripen. I think I've stated almost everything I had in mind. If anyone has any questions, feel free to write. I have to admit that the grow diaries community is not that active anymore and I'm sorry that it has come to that. I hope that the right things will come into focus again so that the community can grow and not compete. Thank you all for your support.
Likes
7
Share
Cut the centre out of 2 of them, also defoliated them heavily as I'm switching to flower at the end of today. I will start feeding power buds from tomorrow as well.
Likes
3
Share
The Moby Dick ist gettin bigger every day. Lovely plant. Did top her and some LST so every branch's gettin enough light. Stay tuned for more 🤙🏽
Likes
44
Share
Waiting on a full plant hang dry so will wait at least two weeks maybe three hope ma vegging station holds up n can dae tge damage the now as av said guys this is definitely not the perfect set up am not on good terms with land lord so basically squatting here lol and growing and a got caught with one in this house the land lord doesn’t even know lol 😂
Likes
18
Share
Thank you everyone for following along ! This is it for this fine lady but I got some more beans to experiment with. See you guys another time ! It may be awhile before I get situated! I will be around though! If you can show some support for a little project me and a friend came up with for each grow !! https://www.youtube.com/watch?v=lhQWMl7kjLg&lc=UgwRIkWLHVSlsOJWXlx4AaABAg&ab