Week 3 Veg Update, (Please see the following) Both Plants ( Seedsman -Critical +2.0 - Blimburn (Applefritter) Thus far both plants are coming along nicely WIll be using Bud clip bender this week to utilize PPF light usage. *Mid-Week Update* Introduced CaliMagic this week LST and Bud clipped Light Defoliation Introduced Element Nutrient (Flower Fuel) 1 week until early Flower. *End of week recap* 08/21 Light Defoliation Bud Clip tie down Thus far all is running smoothly, No changes from above.

Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.

Today I shortened all four plants by fimming. Let's see what will become of them. Day 32: I think they took it well. The new shoots are growing. Day 33: Today I actually had to repot. The roots came out from the bottom of the pots. Plant three is struggling as you can see. I hope it comes through well. Day 35: I think the plagron light mix is too heavily fertilized. The plants give me the impression of being over-fertilized. The purple color of the stems is a hint. Then I will rinse them tomorrow.

What a major growth spurt this week! Must be loving her new pot and all the lights switched on! She grew 25cm this week! 10 inches! She is the tallest in the tent. But anyway, she is doing her thing this week. Nutrients this time are 20-20-20 NPK powdered fertiliser I'm trying this time around. About 12 grams mixed with 10L of water makes ~1000ppm. My clean water alone is ~300ppm of that. I do have a CO2 bag generator thing... It's not doing a lot though. My CO2 meter reads barely over 400ppm.........

May have been using too much nitrogen as there's still lots of leaf growth. Going to try reduce levels of N and increase the ratios of P and K and hope the plant starts focusing it's energy on budding!

Looks like she will be the first to ripen. Probably 2 weeks left on her. Lowered to temps to 72. Will start flush when I see some amber.

.

Il me semble que les puissante brûlure son due au pk13-14. J'ai effectuer un rinçage . En attente de résultats, espérons ne pas brûler les bud

The drying took 2 weeks, but well worth the wait.

Time to start Flush 😀

test

Bienvenidos a este nuevo diario de GG4 Sherbet FF patrocinado por FastBuds! Día -3 (09/01): Se coloca la semilla en tubo de ensayo con 15 ml de H20 Osmosis RO + 3 gotas agua oxigenada (H2O2) en un lugar oscuro a 25 ºC durante 24 horas Día -1 (11/01): Se prepara una maceta de 1L con sustrato PRO-MIX HP BACILLUS + MYCORRHIZAE Se humedece el sustrato muy lentamente hasta percolación profunda con H20 Osmosis RO Se hace un agujero de 1 cm de profundidad, se coloca la semilla con la radicula hacia abajo, se tapa con un poco de sustrato y se humedece ligeramente con agua en spray Se coloca parte superior botella / propagador en la zona de germinación para mantener humedad relativa alta y se introduce en el armario a 20 - 22 ºC (DLI 13 - 20/4) FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fast_buds_official_ @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

I have a lot of vertical space and little horizontal space, that's why I'm not using networks. Only a central 8 mm iron stake, in the absence of a net, to prevent the weight of the buds from bending the side branches, I am tying them to the central stake with ropes made of “t-shirt rags” (they have just the right elasticity and do not hurt the plants, and I have many old t-shirts, haha). It is an economical and simple, but effective solution. Likewise, for those who do not have horizontal space problems, I recommend using networks! Glueberry OG I'm going to cut it next week (before the rains announced for Monday the 24th. Greetings!

JOANNE'S CBD / ROYAL QUEEN SEEDS WEEK #13 OVERALL WEEK #1 FLOWER This week she was flipped to 12/12 starting her first week of flower she's almost caught up to the other plants she's still a little smaller but doing her thing!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU ROYAL QUEEN SEEDS!! BUDTRAINER.COM BUD CLIPS ROYAL QUEEN SEEDS / JOANNE'S CBD

Top

9/22 Week 10 update... finally Looks good but going to add more Phos due to some red stems showing upping to 3ml/g 9/23 Reducing Bloom nuets @10% a day for a couple, down to the 80% mark now Add Soul Peak PK to mix as well as Koolbloom need to use up the Peak and we want to see if it brings anything special. Be in flush within 7-10 days on all but the sativa FF2 Vids finally 9/25 Adjusted nuets slightly 9/26 Like how it looks leaving nuets as is till flush down the road 9/27 And the tricones have over ruled me they are getting ready, 80-90% white 10-20% clear so taking the nuets to our ripening doses. Up PK down Bloom nuets

June 10, 2026 She's stretching now, and looking nice and even so far, barely any imperfections. Lighting was flipped on June 1st, and as of today light intensity has been set to 20 DLI as I don't want to blast her too quickly yet, and instead will gradually dial DLI up to around 40 (or higher) at the tops by mid-flower, or somewhere in the 900-1000 PPFD range. There's also some mild chlorosis in new leaves that's been present throughout the grow, and throughout I've been doing foliar sprays with cal-mag-iron-nitrogen, and that seems to be helping after a few days of application. I'm pretty sure it's genetic, as there's also a few leaves that are near albino and unable to get much color other than yellow, which is often an issue with a lack of iron. I'll continue to treat new leaves as they come and try not to defoliate too much, other than some lollipopping after the stretch is over. I may try to find an iron supplement to add to the spray or the reservoir, just to target iron specifically and see if that corrects the issue.

Week 11 June 2nd

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 26 since time change to 12/12. Hey everyone 😃. Another great week goes by. Last week, instead of 2 g of GHSC Powder Feeding, I only gave 1.5 g p l of substrate so that I can give you another 1 g per l of substrate next week so that it lasts until the end :-). It is developing very well and the buds are starting to grow :-). The week was poured 3 times with 1.1 l each time. once of them GHSC Enhancer was added :-). The bottom shoots have now also been removed :-). As always, the humidifier was refilled every day and the lady was checked for her health. I hope you enjoy the update. Stay healthy and let it grow 😊🍀. You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .