Jawbreaker die zweite
Wir sind jetzt am Anfang der 4 Blütewoche und heute habe ich mir die Zeit genommen mal ordentlich zu entlauben, mehr gibt’s eigentlich nicht zu sagen. Die Pflanzen stehen in meinen Augen gut da und jetzt heißt es eigentlich nur noch abwarten bis die Blüten reif werden.😁 Auf dem 3-5 Bild sieht man die Pflanzen 3 Tage nach dem schneiden. Sie fangen an wieder schön lila zu werden und die Blütenproduktion nimmt fahr auf.
Gorilla Runtz - Living Soil
Alvareas
@Alvareas
Follow
In der letzten Vegi-Woche präsentiert sich die Pflanze in bestem Zustand. Da die sechs Hauptriebe inzwischen recht stabil und kaum noch biegsam sind, gehe ich kein Risiko ein und drücke sie nicht weiter unter das Scrog-Netz. Um sie dennoch ungefähr auf gleicher Höhe zu halten, habe ich sie mit einem am Netz befestigten Draht etwas weiter nach außen und unten gezogen. In der Mitte haben sich inzwischen viele neue Nebentriebe entwickelt und den Bereich gut gefüllt. Zum Ende der Woche habe ich die Umstellung auf die Blüte vorbereitet. Der Cover Crop wurde so weit wie möglich zurückgeschnitten und mit Hanffasermulch abgedeckt. So möchte ich die oberste Schicht trockener halten und die Stickstoffproduktion durch Klee und Weidegras verringern. Der Tropfring wurde entfernt und durch fünf Blumat-Verteiltropfer mit jeweils 20 cm Abstand ersetzt. Ab jetzt soll die Bewässerung wieder automatisch über Blumat laufen. Es wurde erneut mit Nematoden gegossen. Die Trauermücken werde ich bislang nicht los. Vielleicht hilft der Mulch, weil er den Zugang zur Erde erschwert. Der VPD wurde erneut erhöht, und zum Ende der Woche schalte ich den Luftbefeuchter aus. Die Parameter in Woche 6: Controller Einstellung Tag: Advanced AI VPD 1,2 – 1,4 Controller Einstellung Nacht: Advanced AI VPD 1,0– 1,2 Durchschnittliche Tagestemperatur: 26,5 Grad Durchschnittliche Nachttemperatur: 23,9 Grad Durchschnittliche Luftfeuchtigkeit Tag: 52,6% Durchschnittliche Luftfeuchtigkeit Nacht: 52,3% Durchschnittlicher VPD Tag: 1,3 Durchschnittlicher VPD Nacht: 1,1 Durchschnittliche Bodenfeuchtigkeit in Mbar: 85 LED Leistung: 20% = 90 Watt Beleuchtungsdauer: 18 Stunden Umluft: Stufe 1 oszillierend
MoneyMoney
The aloe seems to have taken hold in the plant's nutrients just as we approached 130 days and the buds perfect, we're almost there. Getting ready to consider a good flushing.
Glue gelato - comeback after 2 years
Crescendo rápido e forte sem nenhum sinal de estresse + 1 ventilador vertical, na estrutura + 1 ventoinha de mesa
autø Møøn Røcket 2
StarLorr
@StarLorr
Follow
Welcome to my autø Møøn Røck 2 Diary. In this Diary: Seeds: Sponsored by Ðivine Seeðs Media: Pro~Mix HP *•ns Nutrients: Remo Supercharged Kit *•ns *•not sponsored ___________________________ Feeding: Wed 09Oct: 1L Remo/Recharge pH'd 6.5 Fri 11Oct: 2L Remo/Recharge pH'd 6.5 Sun 13Oct: 2L Remo/Recharge pH'd 6.5 ___________________________ She is the tallest of all😄 Tall and slim, now let's try to get some fat buds on her😋 ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Auto Chemdawg #2
Cream Caramel
Bryankush
@Bryankush
Follow
Il fumo è leggero e buono ma piuttosto blando se si parla di densità e sapori. Del resto cime dure come la roccia e molto resinose. Aggiornamento: dopo più di un mese di concia le cime hanno una consistenza veramente cremosa. Il fumo è terroso, liscio all'espirazione ma dopo lascia una senso di affanno dovuto alla sua pesantezza. Per gli intenditori molto buono.
Papaya Cookies Auto Fast Buds
It’s almost time! This week both plants are getting flushed to prepare them for harvest. 🌱 After that, they’ll be cut down and hung up to dry. #2 has developed an absolutely massive main bud — honestly the biggest I've ever had so far! Meanwhile, #1 stands proud as the tallest plant in the tent, still giving off that amazing sweet, tropical aroma.🍍🍬 Both plants have shown a very fast flowering time, finishing up quicker than expected! Upon checking the trichomes, about 65% are milky, 30% amber, and 5% still clear — exactly where I want them for the effects I'm aiming for. Super excited to see the final results after the dry and cure💚
Copy Cat Super Drip S1
Englischversion below Deutsch: Tag 43 Veg: Heute wurden die Ladies mit je ca. 9 Litern PH6.3 Wasser mit 1ml/L CalMag. Zusätzlich wurden präventiv Nemathoden gegeben. Seit dem Letzen Update vor 4 Tagen. haben 2/3 Ladies den Rand des Topfes erreicht. Etwas LST rundet den heutigen Tag Ab. Es wird nu auf die 3te Pflanze gewartet - Danach wird der vertikale wuchs angestrebt. Im großem Zelt habe ich ein Abflusssystem eingebaut um das Potential für Trauermücken gering zu halten. Das Wasser fließt durch Löcher in den Auffangschalen in eine schräge Rinne runter. Diese entleert sich durch den Boden mit 2 Silikonschläuchen. Ja, dazu habe ich das Zelt angebohrt - aber besser als stehendes Wasser oder händischen Abpumpen. Da ich CO2 nutze habe ich mich für ein geschlossenes Lüftungssystem entschieden. Die Luft wird durch den Luftentfeuchter gezogen und zurück ins Zelt geleitet. -------------------------------------------------------------------------------------------------------------------------------------------- Day 43 – Vegetative Phase: Today, each plant received approximately 9 liters of water adjusted to pH 6.3 and supplemented with 1 ml/L Cal-Mag. In addition, nematodes were applied as a preventive measure. Since the last update four days ago, two out of three plants have reached the edge of the pot. Some additional LST completed today’s work. We are now waiting for the third plant to catch up — after that, vertical growth will be encouraged. In the large tent, a drainage system has been installed to reduce the risk of fungus gnats. Water flows through holes in the drip trays into a sloped channel, which then drains out of the tent through two silicone hoses installed through the floor. Yes, the tent was drilled for this modification — but it is preferable to standing water or manual pumping. Since CO₂ is being used, a closed ventilation system was chosen. Air is drawn through the dehumidifier and then recirculated back into the tent.
Utopia Haze
Vegetationswoche 15 - 17.07. – 24.07.2026 Diese Woche lief wieder alles ganz entspannt. Ich habe die Pflanze einmal etwas großzügiger entlaubt und die Triebe weiter unter dem SCROG-Netz verteilt, damit sich die Fläche gleichmäßig füllt. Außerdem habe ich das Klee-Cover-Crop einmal großflächig zurückgeschnitten, da das Beet inzwischen ziemlich zugewuchert war. Ansonsten gab es nichts Besonderes. Sie sieht weiterhin gesund aus, wächst konstant weiter und das Beet läuft. Das Blumat-System hält die Erde zuverlässig feucht und tropft ruhig vor sich hin.
The gassy one/ AutoPot + Athena run
End of Week 7 – The Ripening Phase Begins! ❄️🚀 We are slowly cruising down the home stretch! Reaching the end of Week 7, the tent is looking absolute top-tier—the buds are packing on serious density, and resin production is running at full throttle. Time to adjust the parameters step-by-step to optimize the final ripening process. Current Values & Adjustments This Week: Lighting (PPFD): To ease the plants into their final phase and prevent stress, light intensity was dropped down from higher levels to 800 to 600 PPFD. Light Cycle: The photoperiod was reduced by 1 hour to simulate the late-summer transition. EC Level: Successfully brought down from 1.9 to 1.2 this week. We will drop it even lower next week to slowly flush out the medium. pH Level: Stable at 5.8 in the coco medium. A Look Inside the Lab (What the Photos & Videos Show): As visible in the latest media, the setup inside the AutoPot system with the perlite top-layer is running rock-steady. The colas are cleanly trained, well-supported, and allow for excellent airflow through the lower canopy. The buds show a dense, compact structure accompanied by heavy pre-resin frosting, while the entire canopy enjoys a beautifully even light distribution. The final sprint is underway. Next week, we’ll scale down the nutrients further and prep everything for the grand finale! 🌿✨
Estrenándome en indoor
Dr_Rook
@Dr_Rook
Follow
Qué largo se me está haciendo.. Pensaba dejarlas ya 3 días desde hoy a oscuras y posteriormente cortar, pero siendo sensato las dejaré otra semana más para que terminen de madurar los cogollos de abajo. Claramente dejé de abonar demasiado pronto, podría haber dado 1 o 2 riegos más tranquilamente, pero bueno una cosa más que aprendo para las próximas. Van a estar 3 semanas sin abonar😅 aunque no han mostrado muchos síntomas de deficiencias
shorts_status_processing
Stardawg (First Grow)
Increased their food by a tad. Looked perfectly health raised to about 1900ppm. Again spider mites at it crawling up every leaf and creating a colony. I thought it was over until I sat there nearly every night finding the f*****s and rubbing the leaves with the spray. Defoliation was needed ASAP due to them stretching nicely. Started slowly from the bottom up. (repeated this process every 3-5 days.)
canuk elite seeds
All ladies doing well.👍 Bubblegum sherbet and Fat bastard seems around 1~2 weeks left, so I start to give water without nutrients. Some parts of buds chage color purple🍇 Permanent Marker needs more weeks. bud size is not much bigger than last week but its gaining, very dense and smelly😍😍
Wedding Glue -2nd
Krissci
@Krissci
Follow
Day 4 - sugar feed. Stop fertilizers from today. Defoliate large fan leaves and HsT large stems
AK48 AUTOFLOWER
Feb 21st /2020 / my girls look so good my nutrients schedule seems to be working with them so far no burns I didnt plan on doing any LST on my AK48 autoflower but this one plant just kept begging me to because of her unique growth
First Ever Grow! Error 404 Autoflowers!
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Morello Cherries Auto
The Morello Cherries Auto has developed well in the last 10 days. My humidity was a little too low, but the plant is slowly starting to develop an aroma. It’s not very strong yet, but quite interesting—I’ll go into it further as the plant progresses. It shows initial signs of phosphorus deficiency. I might look for some organic phosphorus fertiliser. I still have some Biobizz Biobloom, which I could use sparingly, but I’d prefer to avoid adding too much nitrogen. Let’s see how it continues to develop.
First Indoor Bonsanto Mini Grow Box
KarlOlga
@KarlOlga
Follow
Keine Düngung mehr, etwas Bud Bleaching festgestellt- beleuchtungsintensität reduziert! Ich denke nächste Woche wird geerntet. Was meint ihr? 31.01: Wohl doch eher übernächste Woche! Produziert neue weiße Härchen und die Buds schwellen weiter an.