esta sera la ultima fertilizancion antes de hacer lavado de raices esta ultima fertilizacion le damos comida para que resine todavia mas y acaba de aumentar de peso sus flores sacando el maximo rendmiento This will be the last fertilization before washing the roots. This last fertilization we give it food so that it resins even more and it has just gained weight in its flowers, getting the maximum yield.

welcome to Day 29 15/1/21 she has grown so much in 1 week and that makes me happy as she was quite small. I have done light trimming of the lower leaves and toped up the res with the addition of flower nutes. that's all for this week happy growing and as always keep your stick on the ice

Plant has shown slow but healthy growth since its arrival, LST continues and I've managed to keep the plant at the same height it was last week but now at a horizontal angle. I did up the nutes for one feed to a slightly under recommended dose but in the days following I noticed the plant looking a little 'droopy' and since she has been with me she hasnt been drinking very well so I opted to flush her for a feed, since then she has seemed very happy :) whilst drinking much better (possible nute lock was imminent). Now back down to half doseages with the exception of CalMg (to help after flush) but will be increasing them in the following days. As of next week I will be transferring her and another plant my partner is nurturing into single bucket DWC set ups. Fingers crossed I will see some hearty results for making the crossover to hydro.

Buds with nice color start to show up ✌️

OG 4Q24 Flower Week 9 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 5, 2024 CR2 4Q24 57:F:8:1] End of Week: [Tue Feb 11, 2024 CR2 4Q24 63:F:8:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] #Ramping Down - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ OBJECTIVES - Ramp EC from 2.4 - 1.0 - Start rolling off Primer A&B/Silica Skin to Resin Bloom . . . __ Wed Feb 5, 2025 OG 4Q24 57:F:8:1 EC: 2.3 Notes: #5 looks like a 60 day plant, if so - consider Saturday Harvest … Runoff - [x] Amount: [ 0.125 , gal] - [x] EC: [ 4.4 , mS/cm] - [x] EC∆: [ 2.5 , mS/cm] # Fried Yet? ;-} Harvest Dehu - [x] Amount: [ 1.5 , g] __ Thu Feb 6, 2025 OG 4Q24 58:F:8:2 EC: 2.3 Refresh Reservoir - [x] Amount: [ 2 , g] - [x] EC: [ 2.3, mS/cm] - [x] Primer A&B: [ 31, ml] - [x] Silica Skin: [ 15 , ml] __ Fri Feb 7, 2025 OG 4Q24 59:F:8:3 EC: 2.3 __ Sat Feb 8, 2025 OG 4Q24 60:F:8:4 - [x] Disassemble, Clean Reservoir and Pumps, Reassemble Refresh Reservoir - [ ] Silica Skin: [ 15 , ml] - Dropping Silica Skin due to (sparse to medium) granular precipitate - [x] Amount: [ 6 , g] - [x] EC: [ 2.1, mS/cm] - [x] Primer A&B: [ 100, ml] EC: 2.1 @1900 - Clear Manifold Filter. (Mainline should be cleared on 1845 feed __ Sun Feb 9, 2025 OG 4Q24 61:F:8:5 - [x] Dilute to EC 2.0 - Flooded Tent, 2 Gallons PLUS of Runoff. Happy Plants. - Shout Out Shop-vac. ;-} EC: 2.0 __ Mon Feb 10, 2025 OG 4Q24 62:F:8:6 EC: 1.8 HAND APPLICATION Prepped One Gallon of 12-8-7-5 @ 1.8 mS/cm w/ PhotoSynthesis Plus, SLF-100 Reclaimed Dehu Water, ~2 Gallons Refreshed Reservoir, 2 Gallons Rooted Leaf Hydro no Silica Skin, EC: 1.8 mS/cm Reduced watering to 5 min, then 1 - 1 -1 -1 -1 -1 -1 -1 (It’s not like they’ve been under-fertigated) __ Tue Feb 11, 2025 OG 4Q24 63:F:8:7 EC: 1.7 - [x] EC: [ 1.7, mS/cm2] - [x] Refresh Reservoir - [x] amount: [ 2.5, gal] Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 3.6, mS/cm2] - [x] EC∆: [ 0.9, mS/cm2] # Better than 2.5! PLANT POSITIONS 3 5 1 7 4 2 6 8

12/15 I don't know about this plant... I think the transplant was just too much stress and it's done. I knew it was a long shot with an auto flower. I'm going to give it 2, 3 more days. If I don't see a major improvement, I'm pulling it. It looks like the other one I started with this one is lagging too. I had an accident with another plant fallling over on it. Anyway, I went all the way on the drip irrigation system. Ended up installing a main line and then I ran a 1/4 line off the 1/2 main line that runs down the center of the tent. I just couldn't leave it alone and ended up building a pretty decent system. If I add 6 or 8 emitters then I'll upgrade the pump. 80gph won't be strong enough for 8 lines. So it's a bit more involved than living soil, and I enjoy that, as long as I have time. One plant doesn't take a lot. Just check pH 2x a day and adjust if needed. It will swing about 3 points every 12 hours. So I set it to 5.7 or 5.8 and when I get home at night it's at 6.0 or 6.1. It is way more forgiving than dwc and if the pH were to drift bad, then I have plenty of time. It's only got to be right 6 times during the day. 3 days.. I didn't want to kill her, but I'm not going to spend 3 months growing a joint either. 12/16 Looks like she's getting stronger. Took a video of the drip system in action. I tweaked it and added 2 inline drippers so they each have half the cup. They seem to drip pretty even in my other tests. I'm watching close . I hope she takes off so I don't have to start over. Color looks good. My pH was lower than I thought. By .4 points. So I fixed that and the plant seems to have taken notice. Hell the pH was probably just gotten to where it was in range. I got so used to the pen being accurate I totally forgot to double check it. It's right now. 12/18 Changed the res and upped the nutrients to 0.9 from 0.6. She is growing very slowly. I am about to pull it and make room for some clones in another tent. I found a breeder with some genetics I am really salivating for and I may just jerk it out. That being said; I think the increase in nutes has helped the color if nothing else. But with each day I'm more sure she is stunted. 12/20 She is picking up. Color is darkening up and size is getting within range. But she will be smaller in the cup. The latest pics are showing no issues yet. I think I can give her even more. Next res change I think we'll go to 1.0 or 1.1. just playing it by ear. Need to check the runoff and make sure it's not building up any salts. Haven't been top concerned yet because we get a little runoff and I believe I am getting the entire substrate moist. Watching... Waiting...

Day 57: not much to say at the moment. Let the pictures speak for themselves 🌱 Day 59: they are stretching and forming new budsights each day! Everything is looking super good at this point Day 61: I just did a light lollipop and trim and installed the second trellis net! They are still stretching so much. My ph meter is broken so I just ordered a new one I think it will come tomorrow!!! I hope so because they are little dry.

The last two weeks have mainly been about survival and recovery. The clones were still dealing with the consequences of the heatwave, and some of them had a much harder time than others. While some plants slowly started to recover, others were fighting just to stay alive. The progress was far from uniform. Some clones developed a stronger root system relatively quickly, while others remained much more fragile and took considerably longer to establish themselves. This is where the unplanned asymmetry of this grow really began. The original plan was to create a relatively uniform canopy from genetically identical clones. Instead, the plants were already developing at very different speeds before the main grow had even properly started. At this point, the clones ranged from approximately 10 cm to 36 cm in height. Some were stronger. Some were weaker. Some were still fighting for their place. But all of them are still here. 🌱 INTO THE FINAL POTS 16 plants were selected for the main setup, while the extra clone remains on the bench as our substitute player. 🏀🌱 The clones were transplanted into four 15 L pots, with each pot divided into four sections. This gives each plant approximately 3.75 L of growing medium. The four pots were placed into two AutoPot Easy2Grow trays and connected to the system. 🌱 PREPARING THE GROWING MEDIUM For this grow, I am using the BioTabs Just Add Water strategy. The growing medium was prepared with the BioTabs components needed to create the nutritional and biological foundation for the plants. ⚡ SILICIUM FLASH Silicium Flash was added as an organic fertiliser and soil improver, providing silicon and essential nutrients to the growing medium. 🌿 STARTREX Startrex was added to help create a biologically active growing medium and support the soil life around the roots. BACTREX Bactrex was used to introduce beneficial microorganisms into the growing medium. 🍄 MYCOTREX Mycotrex was added to provide beneficial mycorrhizal fungi and support the development of the root zone. 💥 BOOM BOOM SPRAY After transplanting the clones into their final pots, they received another treatment with BioTabs Boom Boom Spray. I decided to use it as an additional boost while the plants were adjusting to their new growing environment and continuing to develop their root systems. The goal of the Just Add Water strategy is to prepare the growing medium with the necessary nutrients and beneficial biology from the beginning. From here, the plan is to keep things simple. RO water. After a few weeks, the AutoPot system takes over. And let the biology in the growing medium do its work. 💧🌱 The 16 clones are now finally in their permanent positions. The tent is already beginning to fill up, but the plants are still very small and have a long way to go. The next challenge will be to see how these survivors develop now that they have more space and a prepared growing medium. Let's see what happens next. 🌱💚

Really nice plant. Very strong smell, Well THC coated buds and very nice effects. Lovely.

04/18/2026 Readings: pH: 6.08 EC: 521 cm TDS: 372 ppm Temp: 66.7° I think I need to drain and fill. The above readings are after I replaced a gallon with one that was only flawless finish. I'm guessing this little lady has a few more days. I'm going to try to dry them at the same time. Or it might make more sense to stagger the drying over time. Like this blue dream first then the apple strudel. I have a feeling she's gonna take a bit of time to flush. Theres one area up top that's starting to show some fade, well maybe not fade. I know it's a deficiency of some kind. And it only started a few days ago. I wonder how fast it will be. I don't remember getting any color from my last run. But we'll see how it goes. I've also dropped the temp for lights out. Now it's set to 65° and should get some color. 04/19/2026 Oops 04/20/2026. HAPPY 420 DAY! Readings: pH: EC: TDS: Temp: Not much going on today. Also, don't know what happened with yesterday's entry. It kinda just went away. Twice. Hopefully today will be fine. Anyway, I'm thinking she has a lot more nitrogen in her system than I originally thought. I'm not seeing any fading or anything. She's just chugging along. I have videos, but I can't upload them. Too big. Anyway, videos are out now. Well, I could send poor quality videos, but that would be counter productive. If I can find another way to add trichome videos, I will post those once a week... Wait, I'm harvesting in like 4 to 5 days. Maybe earlier if she starts fading really fast. Oh and she's also slowed way down on the drinking. I think. I'll find out tomorrow morning really. Actually, she didn't need need any top off. Just had a pH issue. It's really low and tends to swing that way. I'm starting to thing I have a root issue. But I can't tell. I can see one dark spot on the roots that I can't get to. Maybe that's some sort of issue. But that one ends up out of the water almost immediately. With so many roots, it's hard to tell. Can't lift them now. Too big all around. Rotts are too big, plant is too. Ig and well, the tent just isn't taller enough. The environment is like spot on today. A nice 73° and 47% humidity in the tent. But I had to use the AC to dry out the place. It was at 53% in the lung room until I don't know what happened , but the AC obviously worked wonders. It's at 47% in here now and 66° Readings: after pH pH: 5.80 EC: 536 cm TDS: 378 ppm Temp: 67.8° 04/21/2026 Readings: pH: 5.71 EC: 532 cm TDS: 377 ppm Temp: 64.2° No idea what's going on, but nearly all the branches have fallen over. Especially the front and left wall. Not so bad in the back, but like A whole bunch have just fallen over. Some even super cropped themselves. No clues what is going on there. I'm trying to prop them up with other branches. Not working. I might have to harvest. Little early. Well, no, I think she's basically ready. I was thinking a week from Saturday. Maybe earlier now. Maybe it's a good thing. Light is getting to those lower buds now. 04/22/2026 Readings: pH: 4.8 EC: 551 cm TDS: 388 ppm Temp: 66.0° Fixing pH now. pH: 6.1 EC: 591 cm TDS: 420 ppm Temp: 64.0° 04/23/2026 Readings: pH: 5.85 EC: 583 cm TDS: 405 ppm Temp: 68.2° 04/24/2026 Readings: pH: 5.65 EC: 541 cm TDS: 385 ppm Temp: 66.9° I don't think I'm going to pH today. It's in range and I'm certain with the rest of the flush happening it won't matter. I got a couple plant yoyos up. But honestly, it only worked on 2 branches. Everything else is now broken or bent too much. I think I'm gonna harvest tomorrow. I was going to today, but I have a feeling it's still a little too early. So tomorrow it is, or maybe Sunday. All I know is I have branches on top of branches and it's not good. The plant either needs to stand up straight or get to gettin. I'm thinking I accidentally drowned it for a few hours. I read that it can cause bendy branches and feel moist. Or something like that. Either way, it's doing all the things. So I waited a couple days without topping off. It helped I think. I topped it off today with plain pHed water. 8 don't think those branches are going to fix themselves. So harvesting is the key to prevent mold. I know I mentioned it before, but in the back, the branches are all doin the same thing. And just as bad. I gotta check the trichomes. A bud fell off midway down the plant, so I put it under the microscope. Lots of cloudy, a few clear and zero amber. Not done. Why? Easy, they were nowhere near close to the light. I should have lifted her higher. But I didn't. Update: I think I might have to harvest like tonight. Too many branches have fallen and now the Apple Strudel is pushing and leaning against the Blue Dream. Causing even more difficulty with the light. Also, I definitely need to use the trellis net for next run. That's gonna be a special one specifically requested from FastBuds. I was gonna do the LemonPaya, but I'm doing this one instead.

P.punch is going to complete 3 weeks flowering soon and the others 1 week flowering. Happy with thw results so far Feeding them 2.4lt water mixed with fertilizers. Im really liking this line of advanced nutrients ph balanced, ladies are loving it and no signs of any deficiency 👌🏼👊🏼🚀🔥

DAY 1 (06/03/2020) The seedlings started growing tonight after 4 days since they were planted inside the rockwool cube (02/03/2020). They are under a 23w CFL until they are a little taller and start to make the first 2 leaves. The distance is very small from the light to not get them too stretched. Feeding just water now. I already prepared the RDWC setup with a 60 liters box (0,6 m x 0,4 m x 0,25 m) for 3 plants. The grow tent is 120x120 cm. The light will be a Sylvania 600w HPS powered by a Gib Ligthing LXG Timer 600w Electronic Ballast. Since it is dimmable I will start with 250w and increase in the first weeks until reaching 600w. The ballast has the Sunlight mode which increase the wattage of the lamp during the first hour and decrease during the last to simulate the sun cycle. DAY 5 (10/03/2020) Seedling are growing well. I started RDWC yesterday and put 25 liters of water with 15 ml of FloraCoco Grow, 15 ml of FloraMicro,15ml of FloraBloom. I also added 5 ml of Great White Mycorrhizae to strengthen roots. The water from my tap is 40 ppm , the water in the reservoir is 500 ppm. Increased power light to 350w. Temperature and Humidity when lights on: 23°C and 35%. Added a humidifier inside the room to increase humidity.

Plants growing extremely well, the only problem I think I'm having is too many nutrients. Plant A is showing some strange signs. a few big fan leaves are becoming "crispy" I can see a bit of nutrient burn, but a minimal amount I finally set up the drip system this week. I started LST this week, I bent both plants pretty hard, they are almost parallel to the soil. On plant A I did super cropping by mistake, I was tieing a branch and I put too much force on the bend, but palnt didn't seem afected at all by this. DAY 29 - Nutes PH - 5.96 Solution Temp - 21.5 PPM-1600 Watering Volume per plant - 4L DAY 32 - Water PH - 6 Solution Temp - 21.2 PPM-560 Watering Volume per plant - 4L Next week I will add the second ligh to the tent

Growing nicely! Second set of true leaves are forming, still only giving RO+Tap water to 160-180ppm Watering a bit more thoroughly instead of just the top inch. Got my sponsored setup too! Loving every bit of it! Thanks MarsHydro & AC Infinity ❤️❤️

The method used for watering the plants at this stage is done strictly by spraying the nutrients provided above. Lights distance : around 60cm

The stickiest plant I have ever grown. The smell is out of this world. Very very strong smoke, enough to put me in a coma! Great plant will grow again.

Finally broke out of the shock that they were in.