18/09/2022 - 42 days since my little girl sprouted from seeds🌱 The second week of flowering of my Mandarine XL 🍊🍊🍊 Nutrients: Jungle Indabox - the girl responded well to the nutrient change, so I continue to feed the same as last week, when I set the nutrients for flowering Jungle Environ X - bud stimulators 🌼 I am giving Advanced Nutrients - bud stimulators, Bud Ignitor for the last time this week Atami - ATA Calmag - it is recommended to use Calmag when growing under LED lights Training: LST: just a slight LST, I attached some small twigs with string so that more light shines on them 💡💡 Defoliation: I did a bigger defoliation in the middle of the week so that the girl could breathe well and the big leaves wouldn't shade the twigs 🍃🍃 Light: Mars Hydro TS1000, the girls are doing amazing under this great light, I can see a big difference compared to my past results 💡💡💓 The girl is slowly turning into a big lady, her stems are strong, regularly grown, so that massive buds can form on them 🌸👩🌲 You can see white tufts of pistils on the stems, in this week of flowering they are just right and look like a blanket of snow ❄️❄️ She is already a strong lady revealing her beauty. 🌲💓 The box emits a soft scent that reminds of fruit and earth, but it's a gentle whiff 🍇🌍 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 See you soon 😍

I started the 2nd week of light nutrition

I should have had a lot better harvest but because I was away for 12 days the pH and ppm's got messed up. As well as 1 day of the air pump being off after I got back resulted in the start of root rot. Will grow this strain again for sure!

There was a very high heat wave in my country! For the past week we had 40 ª Celsius during day time and 30ª during night time. I lowered the led potency to minimal settings and it workerd really good. The strais are the same and it is really easy to see the differences between them.

Day 80 Harvesting was a bit of a trick with this one because I used to Trellis Nets but it went very smoothly no accidents and in the end I ended up with a staggeringly large amount of wet weight. My wet weights have a minimal amount of stock so that they more accurately represent the actual weight of the flower itself. In three days roughly I will be putting in the dry weight and then putting all the flowers into curing. welcome to Day 83 this will be my last update i have now done my final trim and got my dry weight 362.30 gram's !! off one plant. that's 12.77 ounce's i don't sell but my god if i didn't care about laws lol, For a plant thats no cured i will sat it tastes smooth AF and has a nice head high that i didn't really expect from her being that its not cured and didn't really look like she had tones of trichomes. This baby is going to be nice in a month. I'd like to thank everyone that followed this grow and asked questions as always my friends keep your stick on the ice

Love Barneys farm!

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I hung the full plant upside down for 24hrs. I then hung the individual branches. I left the branches big and I didn’t trim the buds as I wanted to dry slowly. They hung in the dark room with temperature at 21 degrees and humidity at 58% for a week. I then removed the buds from the branches and placed them in a drying net for another few day before jarring. Smell isfantastic.

the plants are pretty low because i only got 1square meter coverage with the leds. The plants will stretch enough to fill the net and put on some weight. The video is from day 5 flowering right after i put the net above them, just enough to push the branches a bit open so the light reaches more bud sites.

Good day every one, The flowering is going on just perfect. New branches began to actively gain flowers. For additional stimulation of new flowers, I installed a household extra LED lamp. no problem with the PH at all , no problem with the PPM : thanks to Hesi.

I'm glad I grew this strain directly, the buds smell fantastic of berries and have developed a slight purple hue. Regarding the yield: Wet Weight: 643g Dry Trim: 35.1g Dry Buds: 123g Wet Weight to Dry bud factor 0.19129 - 19.13%

Pues ya se van formando algunas flores llenas de pistilos!! Y vaya olores que desprende a sus 23 dias a 12/12 horas de luz. Le habierto un poco las ramas inferiores para que le entre mas luz!

All mixed up but leave ur comments on wat yas think first grow

just about finished up this week. Choc mint 1 is about ready for chop. Chopped couple of main colas as i seen couple of signs of budrot. Dropped lights down to 400w each as temps are starting to rise above 30c. Choc mint 2 is looking unreal. Heaps of huge colas,think i will pull the most of this one. Will probably give till day 65.

Solo pequeños cambios no muy notorios, espero que ya vaya tomando mas velocidad a medida que termina la semana.