Processing
Likes
39
Share
@Belverde
Follow
Ola 🙂... the two sisters grow up very well ... first time I try them.. the seeds were given to me by the boy from the grow shop, after buy some Barney's seeds .. With them, under the 205 BD LED light, there is also the sister, who can actually find in the diary SUPER SOIL LED (if you want to see the differences) 😉... 5th week started by giving him a nice lunch based on banana macerate (10 days to macerate), about 0.5 in 1.5l h2o .. pH I never check it when I am using a ready-made soil .. the water I use is quite good and does not contain chlorine (fundamental in organic) .. it has a pH always around 6.5 / 7.5 and is ok ... afterwards I only gave h2o to drink for once, again without letting it come out of the bottom of the vase .. two days after treacle-based sweet like the past week .. this time I gave 1 teaspoon apiece (they will be about 5ml, I think, but that's okay) in 1.5l h2o ... time after still water .. and today, Friday 27th, I finely chopped a bit of barley malt and I made a top dressing, wetting with water in mix with 3ml topmax for 3l h2o, to increase the malt action .. I see just one or two thrips every now and then, but I'm under control .. I have not used anything to drive them out .. only the fan always on and the humidity left slightly higher ... They start to smell good and very sticky too .. I don't know how to describe the aroma at the moment .. sweet .. but complex .. we'll see .. hi, thanks for the time 🙏 and tell me if you like it ... See you next week😉✌️
Likes
20
Share
Likes
36
Share
7/19: Started new nutrients today. Filled gallon jug with new nutes. Poured half of new nute mix in half gallon jug. Poured the entire half gallon jug into reservoir. 7/20: Bumped light intensity to 50% 7/21: Filled reservoir to the 2nd line today. Added a total of 1 gallon to res to get it to that line. Poured the rest of the mixed nutes for this week (half gallon) and then another half gallon of just plain water. 7/24: Bumped light intensity to 55% 7/25: Sadness today 😞.. While in the process of doing more LST today I accidentally snapped the main stem. I Panicked! Moved plant back in opposite direction to counteract the split. Will be monitoring very closely! 🙏🏾 ***** For this Grow****** “Day Air Temperature” will be the max temp of tent for the week. “Substrate Temperature” will be the average temp of tent for the week. “Night Air Temperature” will be the lowest temp of the tent for the week.
Likes
9
Share
IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
@Jotake
Follow
They have staterted flowering 3 days ago,most of them have reach a good measure so we expect to have good flowers always giving good food and fuel jeje,the vídeo is zkittles only they are going the faster Also northen light and micromachine( quite big and vigorous).we gived them a watering with honey yesterday
Likes
45
Share
@AsNoriu
Follow
Day 127. Oh boy it will be my longest grown plant indoors. This bean is from bagweed, just wanted to show, that from shitty weed found seed you can produce good result, but i screw up with this girl by having no space for her, by giving her to wrong guy ... And now again, i checked temps during my holidays and lowest was 13 , highiest 33 ... Very bad, she is from leafy pheno and that didnt helped for buds and leafy i dont like already, hate triming .... ;) Will do last hard training apart from everyday lst here and there , she will loose a bit of leaves tomorrow before watering just phed water. I never feed after training. Tomorrow she will go to new tent and i start new diary, hands full ;) Happy growing ! Day 128. Girl got small defoliation , up to 50 leaves, now more buds get light, have to prepare her for smaller , where i will fit only one light, otherwise its too hot inside .... All movement postponed for a bit, have to leave town so only phed water for her after new look. She drinks now like 5 liters every 3 days. Day 131 . She is stinky sticky b**ch ;)) Amazing plant, my mini bonza, would want to flaten her up, but in new tent fan has to have space aswel ;) Her new fan is delayed an i quess it will take a week to be redelivered ... Fingers crossed. Heavy feed - done. ;) Day 132. She starts to pack up a bit, maybe it will be something desent again. Girl is under two lights ( quantum boards 2x240) and in a week will stay just under 240 , but in new tight house with better reflection from walls, hope it will even pars , despite power loss .... I think i will smoke first joint on day 160, its almost half of the year, crazy adventure ... Her leaves are too green, so no silica and red leaves stemps doesnt show up, so no cal mag . Think she'll have like 2-3 feeds max in two weeks and then final strech ;)
Likes
62
Share
48 hours of FlashClean has done I'm gonna keep flashing with Flawless Finish for 5 days and only then cut Milky color dominating in every plant
Likes
6
Share
@BearBuds
Follow
The stretch has finally stopped, thank goodness, and they are starting to put on a little density. I lollipopped them thinking they would would reach a little more than double where they started, about 26 inches, but they blew right past that and are sitting at 31 inches for the tallest branches. Going to end up with a little fluff, but that's OK, i'll make some strong olive oil out of it. The light is about 9 inches from the tallest branches, but they are all to the outside edge and will be fine. Main buds in the center are at about 13 inches and even the lower buds are a max of 18 which is still a great position. As long as I can keep the light penetrating to the lower buds they should turn out fine. I started at ROCK resinator this week and am pulling back on Canna Part A; after week 6 I will stop it completely and just use the CalMag, Part B, Boost and ROCK. Week 7 and 8 and I will Mendicino Avalanche again, I have always had good results with that. No signs of color yet on the RHC but breeder notes say it comes the last weeks of flower. Its going to start getting colder during the day so I am hoping night time temps in the high 60s and daytime temps staying below 75 will bring out some color regardless. I put a plant outside as a throw away to see what happens and wouldn't ya know it, that fucker is turning purple lol. Hoping they start to bulk up in the coming week.
Likes
13
Share
@Prozak
Follow
the strain is really strong , low temperatures resist , 3 weeks around 12/16º graus and steell growing wel nice new colos between week 4/6 in flowering. really good strain to manipulate! 5 stars * * * * *
Likes
12
Share
Nights are getting chilly and colors are getting beautiful.
Likes
18
Share
Removed the garden staples from the 2 cultivar that have reached preflower and replaced the staples with bamboo steaks to maximize light penetration to all bud sites and did a light defoliation ✌️
Likes
29
Share
@nonick123
Follow
Día 20 (13/05) Todas las plantas muestran las preflores! Vamos a ver después del riego de ayer con nutrientes liquidos como se comporta! Día 21 (14/05) Lemon Cherry Cookies Auto tiene un crecimiento explosivo! No me extraña que FastBuds sean los reyes de las Automáticas modernas Baño de sol de 2 horas! Día 22 (15/05) N/A Día 23 (16/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Día 24 (17/05) Las plantas salen al exterior! 😍 Les aplico heno como mulch (acolchado) Día 25 (18/05) Riego 250 ml solo agua todas las plantas Día 26 (19/05) Lemon Cherry Cookies Auto está sedienta! Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
46
Share
Welcome back to yet another update on my summer grow 😎🤙🏻 Things are still going smooth, a bit defoliation and nematodes was used and hopefully they will do their job in a few days😁 Started to add bloom to the mix, so let’s see how things turn out. As you can see the red spectrum is really working well, and soon I´ll add some small amounts of IR/UV daily. Looking forward to see the result 😊 _____________________________________________________________________________________________ SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/
Processing
Likes
10
Share
@UrbanFog
Follow
The ladies are starting to stretch and flower. We also did a defoliation and lollipop session at the end of week 2 flower. Canopy and bud sites look good and are a plenty. Looking forward to next couple of weeks.
Likes
1
Share
Week 1 of flowering 9/18/24 Took 4 clones a day before. Defoliated and trained plants. Watering 4 times a day (with little runoff at the first watering) changed nutrients to fit the transition from veg to flower (base chart from CocoForCannabis, with small changes to the nutrient line I have) put on another scrog (to keep the colas straight when they get too big for the branch to hold them)
Likes
4
Share
@Testy
Follow
defoil some covercrop and some LST added some almicanna veg compost tea