Hello everyone, and welcome to the Week 3 vegetative update for the Expert Gorilla (Gorilla Glue #4) run! The girls are officially out from under the shadow of the flowering canopy and are basking in the full glory of the Spider Farmer LED light. They are looking absolutely fantastic and hitting their stride. 🌡️ Environment & Light Schedule * Lighting: 24/0 schedule (Running 24/7 with zero pauses—no bedtime for these ladies!) * Day Temperature: 26°C at the absolute hottest point. * Night Temperature: 21°C ambient. Everything environmental is dialed in perfectly, keeping their metabolism running at full speed. ✂️ Training & Upcoming Strategy I just finished topping them to break apical dominance and start building a wide, even footprint. Looking ahead to next week, the plan is to get a bit more aggressive. I will start defoliating to open up airflow to the lower nodes and plan on topping them more if possible to multiply our future bud sites. Let’s see how they handle the haircuts and what they look like by next week! Thank you all for stopping by, checking out the progress, and leaving your support. Best regards, Growfather

Day 1 30/12/24 Monday evening. Started the seed off in de-chlorinated tap water and calmag 3ml to 5L pH 6.4. I will use this water for the rest of the week as sprays and transfer water. Day. 2 31/12/24 Tuesday Seed has sunk 🙌 Transferred now to paper towel, sprayed with same water. Covered. Left in cupboard 24hrs untill tap root emerges ✌️ Day 3 01/01/25 (Happy NY 🎇💚) Tap root only just popped!! I have re applied a spray to dampen, re covered and will allow another 12hrs before checking again. Day 4 02/01/25 Thursday Tap root reached 1cm Seed only just cracked. Will leave a further 24hrs for a sustainable tap root. Day 5 03/01/25 Friday Tap root has reach 2/3cm and now been potted up in a 1L pot with cannaterra pro, added perlite, added cococoir, and dynomyco, all watered yesterday to dampen off. . Sprayed top soils today to settle in seeds. Day 6 04/01/25 Saturday Seed has emerged to top of soil level 😁 Moved all seedlings into the auto tent so they can catch the 600w dual hps. Day 7 05/01/25 Sunday The seedlings are here 🙌 She made it through the first week, onwards and upwards 🚀💚 Light spray with de-chlorinated tap water and calmag. Covered with dome. Picture update 📸💚

Gorgeous plant covered in seeds. Check out my YouTube for long form content that I can't post here https://youtube.com/@aestheticgenetix?si=pSk5e-kvp-nVYccc

Hi all growers, Day 64 Last week of big bud and last two week of fertilising, then two week opf flushing for the baby. I decided to add calmag to reach a ggod ppm, and aptis regulator because olants are really stressed from the olight intensity in some spoot and i hope to make it stronger. Let's see what's happen now. Day 66 She absolutely needed calmag. I gave 0,5/1lt twice and I already can see the difference in leaves. I think I ll give 0,7/1lt next time. I broghut ppm to 950 last time. I desire 1000 ppm for last weeks of fertilising. today: with ph 7 Ppm 1150 Day 69 Today has been the last feeding day for this lady, i just checked with a micro and it looks like i ve got 15/20 days max left. So from day 71 i'll start flushing with ph controlled water at 6.2. today: -ph 7 ppm 1050 Less then 3 weeks now :) ANY SUGGESTION IS WELCOME :)

Welcome to Veg Week 4 of Zamnesia Kalini Asia I'm excited to share my grow journey with you from my Zamnesia Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Kalini Asia : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Zamnesia • 💧 Humidity Range: 60 • ⏳ Flowering Time: 7-8weeks • Strain Info: 22%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

🇩🇪 Cherry Limeade von Doja – Wochenkommentar Die Cherry Limeade von Doja steht weiterhin richtig gut da 🌱. Das Blätterdach bedeckt die 60 × 60 cm mittlerweile ziemlich ordentlich, auch wenn hier und da noch ein paar kleinere Lücken zu sehen sind 🌿. Insgesamt bin ich mit der Struktur aber sehr zufrieden. An Tag 20 habe ich dann den etwas schmerzhaften Teil erledigt ✂️. Ich habe die Pflanze gelollipoppt und alle Blätter und Blüten entfernt, die im Schatten lagen. Das entfernte Pflanzenmaterial habe ich direkt wieder als Mulch ins Beet gegeben ♻️. Ehrlich gesagt tut mir jede größere Entlaubung ein bisschen im Herzen weh, weil die Pflanze danach gefühlt nur noch halb so groß aussieht 😅. Aber diesmal gilt ganz klar Qualität vor Quantität 🎯. Ich möchte möglichst ausschließlich große Top Buds produzieren, die während der gesamten Blüte ausreichend Licht bekommen ☀️. Eine interessante Erkenntnis hatte ich diese Woche auch beim Tensiometer 💧. Ich musste feststellen, dass das Manometer offenbar etwas hängt. Durch leichtes Klopfen bewegt sich die Nadel wieder und zeigt anschließend einen anderen Wert an. Rückblickend hatte ich wahrscheinlich gar keine zu niedrige Saugspannung / hohe Bodenfeuchtigkeit – die Pflanze hat sich schließlich optimal entwickelt 🌱. Das Problem lag vielmehr darin, dass das Tensiometer teilweise falsche Werte angezeigt hat. Zum Glück habe ich mich zusätzlich immer auf die Fingerprobe und vor allem auf die Entwicklung der Pflanze verlassen 👆🌿. Dadurch ist trotz der fehlerhaften Anzeige alles gut gegangen. Ich habe das Tensiometer nun herausgezogen und komplett neu mit Wasser befüllt 💦. Allerdings muss ich das Manometer weiterhin leicht anklopfen, damit sich die Nadel zuverlässig bewegt. Mein Ziel bleibt bei etwa 120 mbar Saugspannung während der Blüte. Heute gab es außerdem 3,5 Liter Almicanna Flower Komposttee 🌸. Der Tee wurde zuvor insgesamt 48 Stunden unter Belüftung gebraut und durfte anschließend ins Beet 🫧🌱. Jetzt heißt es erst einmal zurücklehnen und der Cherry Limeade beim Aufbau ihrer Buds zuschauen 😎. Nachdem sie sich in den nächsten Tagen von der Entlaubung erholt hat, werde ich die Lichtintensität schrittweise auf 1000 PPFD erhöhen ☀️. Jetzt beginnt für mich der wirklich spannende Teil der Blüte – weniger Training, mehr beobachten und hoffentlich viele schöne, dicke Top Buds 💚🌸. 📊 Parameter der letzten Woche: 💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand) 🌡️ Temperatur: 27 °C 💧 Luftfeuchtigkeit: 66 % 📈 VPD: 1,2 kPa 🌿 CO₂: Ø 550 ppm 💦 Bodenfeuchtigkeit: 120 mbar 🇬🇧 Cherry Limeade from Doja – Weekly Update The Cherry Limeade by Doja is looking really good 🌱. The canopy now covers most of the 60 × 60 cm tent quite nicely, although there are still a few small gaps here and there 🌿. Overall, I’m very happy with the structure. On day 20, I had to do the slightly painful part ✂️. I lollipopped the plant and removed all leaves and flowers that were sitting in the shade. Instead of throwing the plant material away, I added it straight back to the bed as mulch ♻️. I have to admit that heavy defoliation always hurts a little because the plant suddenly looks like it has lost half of its mass 😅. But this time I’m clearly going for quality over quantity 🎯. My goal is to produce mainly top buds that receive plenty of direct light throughout flowering ☀️. I also discovered something interesting with the tensiometer this week 💧. The pressure gauge seems to be sticking slightly. A gentle tap on the gauge makes the needle move again and reveals a different reading. Looking back, I probably didn’t have excessively high soil moisture at all – the plant has been developing perfectly 🌱. The problem was simply that the tensiometer was occasionally giving me inaccurate readings. Fortunately, I also relied on the finger test and, most importantly, on how the plant itself was developing 👆🌿. Because of that, everything worked out despite the faulty readings. I have now removed the tensiometer and refilled it completely with water 💦. However, I still need to gently tap the gauge to get the needle moving reliably. My target remains around 120 mbar soil suction tension throughout flowering. Today I also gave the plant 3.5 liters of Almicanna Flower Compost Tea 🌸. The tea had been actively aerated and brewed for a full 48 hours before being applied 🫧🌱. Now it’s time to sit back and watch the Cherry Limeade build those buds 😎. Once she has recovered from the defoliation over the next few days, I’ll gradually increase the light intensity to 1000 PPFD ☀️. The really exciting part of flowering starts now – less training, more observation, and hopefully lots of beautiful, chunky top buds 💚🌸. 📊 Parameters from last week: 💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance) 🌡️ Temperature: 27 °C 💧 Humidity: 66% 📈 VPD: 1.2 kPa 🌿 CO₂: Avg. 550 ppm 💦 Soil moisture: 120 mbar

So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Here we go, it's the end 🏁🏁, eep flushing, Go to harvest, didn't really check the trichromes, I need to harvest now, start to be impossible with the smeel, several neighbors complain to me.. 💧 Give water each 2/3 day 2 l Water + Flash Cleaner (3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 28 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week for the harvest ✂️✂️👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

Hung for 8 days. 75f 50-65%rh. The smell off the blueberry literally smells like if somebody blew a blueberry flavored vape in my face. I dry trimmed it and it was smelling ripe let me just say. Put it in jars and had to get rh down was floating up to about 70 but every time I opened that jar the smell got better and better. Round nugs like golf balls I smashed mine while they were wet still a little bit out of excitement and checking for dry but this bud is awesome and was strong enough to survive me so.. hope thst says enough

Feb 1st Plants are stretching out with about 2” growth last week. The root structure is awesome. I will be transplanting to individual pots soon. I am going to try out an autopot system which is still considered hydroponic although I will be using coco/per light medium Started them on 75% strength nutes Feb 3rd Moved the plants over to my new autopot system Feb 4th Plants moved to the new medium coco/perlite with very little shock. With in 18 hrs all 3 were perky again

Week two wrap-up Key Milestones for Week 2: · Day 8: Fan fell and broke a large branch off Plant 2. · Day 9: Bound the branches to the pot covers to spread the canopy. · Day 10: Severe pH crash (4.9/5.2) — corrected with pH Up. · Day 11: PPM spiked into the 700s — corrected with RO water dilution. · Day 12: Bud sites became visible. Internodal spacing is tight. · Day 13: Heavy nutrient consumption established. PPM stabilized between 570–612. · Day 14: Roots measured at 90 cm (P2) and 1.5 meters (P1). Hydroguard still in transit. --- Reflections from BAM (Bryan) Thoughts on the last 7 days: I've done this nine or ten times before, but never with this level of precision. This week was a trial by fire—broke a branch, fought a pH crash, and had to skim Big Bud off the top of the bubbler. And yet, I've never seen my roots look this good. I'm learning the hard way that shortcuts don't work, but the right way works every time. Quote from BAM: "Turns out, you can't cheat the chemistry. But when you get the mixing right, the plants don't just survive—they thrive. I'm seeing things I've never seen before." --- Apex's Take You didn't just survive Week 2. You learned how to bend when a branch broke, how to stabilize when pH crashed, and how to mix when the old ways failed you. The roots are longer, the buds are forming, and the data is cleaner than it's ever been. We are entering the bud swell phase with a stable foundation and a clear path forward. "You can't always prevent the fan from falling, but you can always control how you recover. Week 2 taught you resilience. Week 3 will show you the reward." — Apex

welcome to Day 83 3/10/2021 the girl sure got super big but the buds still never got very fat. but still 400 Grams wet is good I estimate 80 grams dry there are more updates on the way as she dry's out and I get the real weight

• Day 72 Today I started with the RIPEN (3.5 ml / l). 💪🏻 I want to see if buds actually gain mass and weight. 🏋️‍♂️🏼,🏋️‍♂️🏼,🏋️‍♂️🏼,🏋️‍♂️🏼 • Day 75 The finish line begins to be seen on the horizon. 🏁 Looking at the girls tonight, I came up with a term that I read in another diary from which I took a lot of ideas: "buds on buds". 🌾🌾 Buds on buds is the difference that I notice thinking about how they were even just three days ago (see photos).📸 Being at my first experience, I don't know if it is a natural thing or if it is the Ripen that gives its effects. 🎆

This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned

This will be my 1st auto run. Other than one time I was sent some free f1 autos from rqs and I started some but I ended up tossing them for some reason or another. I am actually super excited to try out fastbuds. I have been wanting to try out fastbuds for over a year now. I'm not the greatest with seedlings so I am doing a test run with a 2x2 tent I'm gonna try and grow the best plant I get out if the 3 seeds hopefully it doesn't out grow my small 2x2 tent . Pound cake thou looks like a killer strain with some fat buds can't wait to see how fast fast buds really are. Here we go.

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.

The Afghani x Mac1 auto from DNA recovered well from the training and is in full bloom. Bud sites are looking great. Had an issue with humidity this week and the leaves started looking rough. She got a dose of Recharge this week and drinks about 8-12oz of water throughout each day. All in all she's trucking right along. Very happy with how smooth this solo cup grow is going.

Everything is going pretty smooth. Twisted helix is still looking rough and the leaves are dying. Other than that everyone is looking happy. Just packing on some trichomes and building some buds. Excited to see what these girls do over the next couple weeks. This sugar cane has the same mutation as the last one. Ovules growing out in the open not protected by a calyx. These ovules shriveled up and pretty much disappeared on the last plant. Didn't notice them in the buds at all.

Day 101, been cutting off fan leaves on lower nodes, adding ice cubes and spraying cold water on buds. Expecting about 5 more weeks till harvest but I don’t know just guessing Also I don’t know how to change the question so I’m gonna put it here, has anyone tried to defoliate some smaller colas then tie them together will that be beneficial for bigger bud(promote one another) or is it better to leave oxygen to pass through, thanks