Bueno, van muuuy bien, quizás en alguna variedad me pasé con la tijera y por solo confiar en las cabezas, no voy a sacar mucha producción pero bueno, lo que salga se fuma, y lo que no, se cultiva de nuevo xD. Las plantas tiran un oloor... Me lo tiene todo apestado! Jajaja para bien! Aclaro que estas fotos son literalmente tras encenderse las luces despues de 6h de un producto de descarga total antifungico que usé en oscuridad. El producto es valido para floración, ademas que pienso que aún quedará un mes pal corte, tiempo de sobra + 2 semanas de secado + otras 2 semanas de curado (no nos engañemos, se fumará desde que esté seca xD pero la teoría es que no, que aguanto hasta que cure). El tiempo este que digo, lo menciono a modo, tiempo mas que de sobra de irse los restos. Debido al producto, que lo coloqué en el centro del armario, las ramas mas cercanas han sufrido de estres químico y han cerrado estomas, por eso estan mas marrones o caídas, incluso como si tuviesen estres hidrico. La semana que viene cuando suba las fotos, veremos los cambios :). PD: el olor de esta planta no estoy seguro de identificarlo pero es muuuuuuy muy acentuado! Una pena que los cogollos me vayan a quedar pequeños pero bueno, pinta a que va a saber muy muy sabrosa, tipo dulce de este de chucherias, cuando tu abres el cajón de chuches del chino? Pa cogerte lenguas y melones y jaleos? Pues a eso!

Good week same as last time couple more tears, some more major then others. But the original first snap seems to be healed so im confident with tapping they would heal fast. Going to be cutting for clones because i want to flip into flower ASAP going ti transplant into 5gallon first. Also ordering a new LED. Amazon led did okay for the budget but its time to see what i can really do! Very excited 🤠

I got a smart plug for my humidifier and modded the button with an Arduino so that it turns on automatically when powered. Now I have events in my home Assistant on raspberry pi which will keep the VPD within a specified range. Every since then, the plants have been SO much happier and I have piece of mind now. I'm hoping these plants can pull through the stress, but I planted 4 more bag seeds just in case, they will sprout soon. I did some LST because why not. Accidentally broke a stem but I squeezed it together so now I have to pray.

La pianta per le bassissime temperature di fine ottobre è stata tagliata qualche giorno prima ma sicuramente la rifarò indoor. Sono molto contento e difficilmente lo sono. Ho detto tutto 😊🖐️

4 Purple Push Pops PPP (grew 2023 outside). Clones from my clone guy 1000w LED, 4G Autopots,, coco/perlite 65/35, Jacks RO + dry koolblom and humic acid , RO water, AC pro Controller and T8, 5x5 GG Tent with extension Garage grow SoCal Another hot week in the garage averaging 88°. The girls are starting to get fat and enter the ripening stage. Purples are strong. I got purple trichomes!! We’re running just under 1000ppm with no issues. We switched nutes and reservoir funk is gone. This weeks accomplishments: Switch from GH to Jacks RO Install separate reservoirs for black cherry gelato and purple push pops Clean all autopots and reservoir lines. Install separate lines for black cherry gelato This weeks issues: Spider mites. Found them in the outside grow and found a few leaves with them inside. Big time nightmare. Primarily on the gelatos inside. Doing manual scouting and removal every day. Long term issues It’s hot. High 80s low 90s all week. So the same - Cooling and VPD targets during heat waves Preventing the spread of mites and mold issues during high humidity conditions Managing girlfriend expectations through harvest. I hope you all are having as much fun as I am. Best of luck gromies. Check out my black cherry gelato grow and compare side by side with my indoor grow- same clone batch. This should be a great comparison of indoor versus outdoor grows on the same schedule, same nutes and same clone batch 👍

Last week! storm’s about to hit the tent 🤩🤩🤩🤩

Hey ihr Grower, sind am Tag 79 angekommen. Den Mädels gehts super! Blüten werden immer größer. Temperatur noch bei 23C und die LF habe ich etwas runtergedreht und auf 45% gestellt. 2.5L Wasser mit Hesi Bio-Bloom bekommen sie alle 3 Tage, mit einem Ph-Wert Zwischen 5.5-6.0. Die Lumatek 200W Pro ist nun 30cm entfernt und auf 100% gedimmt. ------ Tag 80 angekommen. Nachtbilder. Den Mädels gehts super! Blüten werden immer größer. Temperatur noch bei 23C und die LF habe ich etwas runtergedreht und auf 45% gestellt. 2.5L Wasser mit Hesi Bio-Bloom bekommen sie alle 3 Tage, mit einem Ph-Wert Zwischen 5.5-6.0. Die Lumatek 200W Pro ist nun 30cm entfernt und auf 100% gedimmt. --------- Wir sind an Tag 82 angekommen. Den Girls gehts bestens! Blüten werden immer noch größer. Temperatur bei 23C und die LF ist auf 45% gestellt. Der Heizer von Spider Farmer macht eine super Arbeit - Temp. und LF noch konstanter. DDD bei 1.5. 2.5L Wasser mit Hesi Bio-Bloom bekommen sie alle 3 Tage, mit einem Ph-Wert Zwischen 5.5-6.0. Die Lumatek 200W Pro ist nun 30cm entfernt und auf 100% gedimmt.

Week 10...The plants are looking good! Took out the microscope to look at the trichomes...Starting to get milky but still another week or two before the harvest! Started flushing the plant this week!

Week 11 7th week of flower. Light settings 12/12 on at 9.00am off 9.00pm Light power= 75% 184w Radiator settings LIghts on Turn on if temp drops below 22.5c Turn off if temp goes above 22.5c Lights off Turn on if temp drops below 18.5c Turn off if temp goes above 18.5c Extractor settings temperature 23c with 1c steps Humidity 50% with 0% steps Max speed 10 Min speed 4 VPD aim 1.0-1.4 DLI aim 35 Wednesday 5/4/23 Day 71 (Day 43 flower) Away Thursday 6/4/23 Day 72 (Day 44 flower) Away Autofeed 4 15 minute runs Normal pump 4 drops ph d Water Est. 24L Ec=0.22 Ph=6.3 Est. 18L left Roughly 2L each. Friday 7/4/23 Day 73 (Day 45 flower) Back home 3.30pm Movement fan has broke while away. 15L left Ec=0.225 Ph=6.7/6.7 Used15L over the week. Plants didn't like being on just water for a week. Needed PK #3 Height= 63CM Dist= 30CM DLI= 36 Big defoliation. Lifted light and moved it. #3 Height= 63CM Dist= 36CM DLI= 28.6 Saturday 8/4/23 Day 74 (Day 46 flower) Autofeed 5 runs (total 70 mins) Normal pump Different Feed times 4 drops ph d Nutes 15L Ec=1.37 Ph=6.3 8L left Roughly 2.3L each. #3 run 0.22L Ec=2.54 Ph=6.2 Radiator settings LIghts on Turn on if temp drops below 21.5c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 18.0c Turn off if temp goes above 18.0c Extractor settings temperature 23c with 1c steps Humidity 45% with 0% steps Max speed 10 Min speed 4 Been a hot day. Sunday 9/4/23 Day 75 (Day 47 flower) Nothing Monday 10/4/23 Day 76 (Day 48 flower) Nothing Tuesday 11/4/23 Day 77 (Day 49 flower) Autofeed 6 runs (2,3,5,15,15,15 total 55 mins) Normal pump Different Feed times 4 drops ph d Nutes 8L Ec=1.32 Ph=6.3 8L left Roughly 1.6L each. #3 Height= 63CM Dist= 36CM DLI=22.1 Light power= 100% 240w #3 Height= 63CM Dist= 36CM DLI=28.7 I was away for most of the week so the grow was on autopilot. I decided to have them just being watered rather then having any nutes this week. Some plants suffered a little but I got on top of it when I got home. #3 Gorilla Cookies FF is still looking great, she had been OK while I was away but could have also done with nutes earlier then I managed. Power used for week Light (2.21+2.22+2.21+2.21+2.22+2.21+2.25)=15.53Kw Extractor (0.55+0.57+0.55+0.54+0.58+0.58+0.58)=3.95Kw Fans (0.98+0.99+0.94+0.94+0.95+0.89+0.87)=6.56Kw Dehumidifier (++++++)=Kw Radiator (2.22+2.19+2.46+1.75+1.38+1.1+1.69)=12.79Kw Water pump. (0+0.01+0+0.01+0+0+0.01)=0.03Kw Total for the week=38.86Kw Back in a week. Thanks for stopping by.

For the most part the Clones seem to be doing very well. I did lose three clones that did not take. I can only assume it was because of using Earth dust. When I initially made the Clones the Earth does micro fungi formed a tight layer in a medium so I could not push the Clones in to be planted. I had to use a probe in order to make a pilot hole to plant the Clones. I'm assuming that there was too much of a distance between in the pilot hole for the stem of the Clone to take root, So they died. This is the first and last time I will ever used Earth dust for clones. I normally use a Coco soil mix. That's all for now.. Hope everyone is doing well! Cheers!

Avevo staccato due cime per pianta delle kmintz. Mantengono quello che sentivo mentre le toccavo. La prima pianta sa di caramelle zkittlez con un fumo che nell aria non è il classico odore di erba ma qualcosa di incensato e mi fa impazzire.La seconda è decisamente più complessa. Zkittlez/frutti di bosco/nocciola/gas. Ho scritto oggi a Ripper Seeds facendo vedere un po di foto e mi hanno detto di tagliarle pure anche se manca qualche giorno rispetto ai 63 dichiarati dalla casa.Ho già ricomprato 5 semi perché le rifarò sicuramente se non il prossimo ciclo quello dopo. Le due Watermelon Zkittlez proseguono la fioritura. A settimana prossima coltivatori 💪🤞

This will be one of the last uploads before harvest. And even then I plan on taking photos of the harvest so I can really show how big this thing is. The root ball must be massive I've had roots dying and growing constantly through the fabric pot for a month+ now. It's smelly as fuck and resinous as hell. My third plant....third times a charm lol. The first two fuck ups, third one a masterpiece to me anyways. And time still yet to tell with curing I may fuck it up again but I'm going to do my best to do everything right this time 100%. I gave purpinator for along time basically since week 4 or 5 and it never really turned until the end a light shade of red on most of the branches. I might let go another week so it sucks all the fan leaves dry if that's ok. My last update came a day late. This one came a day early since I consider my first actual veg day to be on a sunday

Hey guys :-) She is developing great. This week was poured 2 times with 1 l each (nutrients see table above) Otherwise, everything was cleaned and the lady sprayed with Fast Plant Spray. Since there are still 2 weeks left until there is space in the bloom tent, the topping was made again 😃 have fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

I love these strain's from sweetseeds but special These one , ust the First time i Grow these one on my own, because of these i will havw to wait a little to see the beautiful colors i have see in the other's diaries, but i know the genetic family of these lady and i just can say Bravo, i will love to grow always these strain, has been 8 days and she's is 2 Time's bigger than the other strains for 6 seedbanks i have on my testing.

The progress is real! On the 14th, all seeds had germinated. The difference of 4 days is, for me, unreal. I will keep you guys updated. See you soon

I have not been able to spend much time with the plants so was glad i found an hour to transplant them to 5g, not so excited on missing the watering on this one. LOL but she came back the next day strong as ever