This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

Hello fellow growers, I harvested my plant on Day 68 of the flowering stage. The buds are now hung up and drying in an environment with a relative humidity (RH) of 55-60% and temperatures ranging from 18°C to 21°C, I've set up two fans to keep the air moving gently around the drying space. Today marks Day 6 of drying, and I'm aiming for a nice, slow dry to preserve the quality of the buds, followed by a dry trim. Reflecting on this grow, I can see areas where I could have improved, but considering it's my first time, I believe I've done a commendable job. There are quite a few larfy buds underneath, but the top buds, which were closest to the light, turned out great. I initially thought I had nailed the training techniques, but as soon as I flipped her into the flowering stage, she got out of control. This experience has taught me the importance of being even more disciplined with my training methods in future grows. Overall, I'm thrilled with the outcome and have learned valuable lessons for my next run. Can't wait to see how these buds turn out after curing! Wish me luck as I move into the final stages of this journey. Let's Grow!

Plants coming on nicely showing vigorous growth and nice fat leaves. Side branching already which makes me think this would be good for a scrog or topping for a nice multi cola plant in dwc. Like the others I'll probably leave this express it's natural form as I've not grown it before. Always nice to get an idea of what they prefer before torturing them into what you want. Calmag added now as my water demands it here.

Day 48 - defoliation rotate plants and fed with 1.5l each @6.5 ph Day 51 - more defoliation , rotated plants again and gave 1.5l @6ph full week 2 nutes Day 53 - doing some testing here I again gave another full nutes with this feeding to see when it starts showing some nute burn. gave each plant 1.5l each full week 2 nutes @5.8ph

During this first week of vegetative growth, the seedling has slightly stretched more than expected, but this is not a problem since when I transfer it into the larger pot, I will bury the stem. 🌱 I haven't started giving nutrients yet because, as already mentioned, the substrate I use has them for the first few weeks, in fact the leaves seem to me to be a nice bright green. ✔️ I proceeded to mount a small fan on the side of the tent to create recirculation of air and make the stems of the seedlings take some strength. 💨 For now the main tent is occupied by the flowering phase of other plants so for the first few weeks I will leave the seedlings in the closet with smallest led light. 💡 (link below) ⬇️⬇️⬇️ https://www.amazon.it/gp/product/B08P2G1VQW/ref=ppx_yo_dt_b_asin_title_o05_s02?ie=UTF8&th=1

This week is basically more LST my plant that split has repaired herself within four days and looking amazing and has the most growth out of the three Widows

First week of veg ! First true 🌿 😁 Just Moved too the vegging room.

long storie this week what i though was foxtail was finally my girl going back in veg take a minute to figure out why thanks to my wolfpack we finally figure there was a problem whit my timer for a reason unknown the switch for 1am to 2:30 am were rise so in the middle of the night the light was lighting for 90 minute so that completely flip my plant back to veg so now this is fix but the girls are doing some reflowering on top of flower its looking weird will see how it goes stay tune as for her she's not ready looking at trichomes Smooth Smoke Feminised Seeds by the cannabis seeds breeder Tropical Seeds, is a Photoperiod Feminised marijuana strain. This Feminised seed grows well in Indoors, Outdoors conditions. This strain has (Pakistan Chitral Kush x Nepal Highland P3 ) x Pakistan Chitral Kush Genetics. It has a Unknown THC Content. The CBD content of the strain is Unknown. This strain can be used to treat a variety of medical conditions including, Pain. BREEDER Tropical Seeds GENETICS (Pakistan Chitral Kush x Nepal Highland P3 ) x Pakistan Chitral VARIETY Mostly Indica FLOWERING TYPE Photoperiod SEX Feminised GROWS Indoors, Outdoors FLOWERING TIME 55 - 60 days MEDICAL CONDITIONS Pain MEDICINAL PROPERTIES Especially good for pain relief. TASTE / FLAVOUR Berry, Candy, Sweet, Vanilla EFFECT Powerful, Relaxing

This grow has been sooooo easy apart from a slight bit of nutrient burn that you can see, she has been a pleasure to grow, she is taking longer than expected but i wouldnt have her any other way lol. Ive noticed that the pistils really turn bright orange even red 😁- i hope she tastes and smells as citrusy as she looks😝 - also getting frosty 👍 Merry Christmas Everyone!!😉

Hi all another week down almost . I’ve recorded a couple of videos (beginning or week and back end ) as you cannot see the big girl properly with a photo . She has soo much going on ,I’m not only proud of myself but super pleased with this girl . Having germinated only 2 seeds and got 2 plants granted one was weak from the start , that easily could have been my doing as a newby , I really cannot fault GHSc . Feed has been easy to work with and without dramas . Shouldn’t be long now before I start flushing ready for harvest . Thanks for being here with me , I don’t feel I’ve got any hope regarding the compition but that wasn’t my hopes anyhow , I wanted to see how I did as a newby growing same as some veterans . Happy considering . Stay safe and happy growing guys

Week4 5-6 Day 22 Flowers, right around the corner. Just readjusted LST, tad behind. Maybe made a boo boo. Maybe not. But I did drop her on her head week 1. 😵 Time will tell, either way, I'll finish her. I've been all over this grow. Wind burn, clawing, maybe stunt. Hahaha the fun of growing and learning. Eco 30%. Claw fix in progress. Happy Growing!

What a nice harvest. Fingers were like id been playing with super glue. And stunk of lemon orange + fuel. Sex on stems. Really nice harvest. I stripped thus one down a lot more than what I normally do ad it had a lot of weird shapes. And the HST points would of made for an uneven dry in parts. Took over 14 days to dry at 19.5c 50-55rh. 2 months curing. Yet, not much was left to show. I don't think it was THE BEST pheno. So I will do a hunt on this and grow 3 while prepping clones and will find that perfect one and grow the oranges off it. Fuck lemon is GOOOODDDDDDD LEMON & ORANGES SOOOOO FUUUCCCCKKKIIINNNGGGG

sooooo... I have now harvested the plants and they looks so pretty 😍😌 I'm really proud of myself to have produced such THICC BUDS!!! 😅😍 and the smell is so awsome 😵 this strain is a 11 from 10 👌 a realy big Thanks to Royal Queen Seeds for this 2 awsome strains 💪 A detailed rating comes after drying with a detailed score board 😄

Bloom W2 Blütenstände fangen an sich zu bilden, stretch bisher 15cm 14.32026 Gieswasser 1,0L , Ph-Wert 5,8, EC 3,0

Semana top por aqui.

She sure is turning into a pretty plant. She’s looking good!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Bumped up the nutrients this week. not by much, though. Just enough to top off. I prefer to make gradual increases and underfeed rather than overfeeding. To me it's easier to correct problems of underfeeding than to correct the problems from overfeeding.