Week 13 for our Runtz, just like I said earlier. She’s officially been moved to center stage, and now all eyes are on her, especially with the auto-watering system.Since I had four spare drippers, because the other plants have been removed, I decided to run all four into Runtz’s pot. There isn’t a single patch of coco outside the reach of those four drippers, so no more “dry corner” excuses.Feed strength is steady as usual at around EC 1.3, and humidity is way more manageable now. I can keep it around 55%. Temperatures sit at about 23 to 24°C, so everything is nicely in range for flowering tops.It’s actually crazy to think she used to share the same tent with three other roommates, because since they left, the space looks like it was custom-built for her. The plant is happy, I’m happy, so let’s keep it rolling. Tips are always welcome, and happy growing everyone.

Week 5 for our Fast Version A from super sativa seeds club. She has a very nice pine tree shape! Looking amazing at the moment, cant wait to flower the lady and compare with version B. This week we gave some orgatrex and applied some more top dressing with worm Castings

She has a delicious candy/sweet perfume! Bud structure is really nice, tight nodes and dense buds, I love this {unknown} strain! 😍

Great strain!! Amazing smell and superb flavor and great Stoney buzz!!!

So sad I'll never see this plant again but if i get a baby clone to live this won't be the end

Hello everyone week 1 of flower has passed for this Cherry Cola auto 🍒 Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

Welcome to my Ðivine ØĠ Ķush diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Tue 18Jun: 13L water not pH'd Wed 19Jun: 10L water not pH'd Thu 20Jun: 6L nutrients pH'd 6.5 Sat 22Jun: 6L water not pH'd ___________________________ We went through a heatwave from Monday June 17th to Saturday June 22nd with temperatures of 34°Celsius with humid factor of 44°Celsius girls got thirsty and finally it poured rain from Saturday afternoon to Monday morning witch was more than welcome for the girls and our garden. Temps are back to normal now🌤️ Kush kush fell on Wednesday due of wind gusts, made an anti-tilting device🤓😂seems to work so far... we'll see when branches get heavier with the buds weights😅 ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

It was a quick and wonderful week. There are some unwanted flying insects. I hope someone can help me because my circumstances are very difficult. I hope companies will provide support, even if it's just a little.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

3rd Week of flower and the plants have been stretching a lot. The nanaz x BBC are way taller that the Headbands. I also replace the Electric Sky 180 V2 led light for a IONBOARD S24 200W from Ac Indinity. The buds are starting to appear as well.

Greeeeeat week! Dynomyco has truly helped this Girly to get off to an amazing start and gave her the force to gain thick stems and more branches! It could also be the addition of Co2 in the grow area! I also give her a diluted foliar feed of formulex as she goes through the day as I have a very low humidity for that week but I can bring it up now as I don’t need it so low in my home! (Was drying other plants)

one tank, the left side, went bad water... some kind of something in the water... some kinda growth or thingie.... so .... i went after the bad water tank hard... pulled it out... scrubbed the tank... scrubbed it all... the funny thing about this is.... these plants are both 50 days old.... haha.... i put em into a type of suspended animation .... lol they are just now starting to hook onto the solutions and are now both feeding.... the growth rate will increase exponentially over a short amount of time, now that they have both hooked onto the neut water and are growin roots thru the clay balls....... (look close at them, notice the first stage 3 leafs ? so u know what stage of growth, 3 leaf and 5 leaf and 7 leaf.... etc... so 50 days and u can clearly see the first stage 3 leafs... lol) (this probably has some major implications for growing food in space) 👍😎

2/17: I spent a little time rearranging today. I bought some 32" x 14" plastic ventilated storage shelves and cut the legs down on two of them so I have some different-height platforms for the shorties in the garden. I should also be able to easily flush 6 plants in 5 gallon pots, or 9 plants in 3 gallon pots at a time now, that's a win!👈 2/18: I debated whether to feed or not, and settled on watering them with about 1/2 gallon each. including bembe, cal-mag, signal, humic acid, and a little beastie bloomz. The new dehumidifier is pulling about a gallon and a half per day from the air, so I should be able to feed them in a couple of days. I've reached the ceiling again with my lights. Both plants are budding up now. 2/19: Rainy day outside, so I'm pulling in 99% humidity, plus the pots are still petty saturated, but the new dehumidifier is keeping up. RH is holding at about 45% today.👍 2/20: Day 31 of flower...the tall one grew another couple of inches overnight! Damnit!😟 After emptying the closet (again) today and supercropping more branches (and some of the same branches again), a semi-solution occurred to me that allowed me to raise the lights another 3-4 inches! Now I'm truly maxxed out... Not a very stable strain..just look at the difference in the two I grew... I really needed everybody to finish in the same week so I could get my Spring autos going...😶 I'm still hoping that they will get their groove-on and finish by the EHD(3/11), but it's not looking possible for the taller one at this point... The shorter one is starting to smell really nice...faint, but funky. I took photos and videos of all the plants today since I had to empty the closet and it wasn't a feeding day. 2/21: I fed them today with about 3/4 gallon each including beastie bloomz, tiger bloom, big bloom, signal, bembe, and cal-mag...no grow big this time. 2/22: The short one continues to pack on the pistils, but the taller one is slow as hell....😟 2/23: I ordered some Terpinator because I'm not so sure about Signal's efficacy at this point....I'm usually dealing with odors more by now..😕

Here we are entering week 5 of flower. Steady growth, the buds are starting to gain some good weight. The leaves looking nice and green with some nice frost

Marker is also doing well in week 6. It seems ready for flowering soon. I've started giving it slightly more nutrients.

She just keeps getting chunkier. Growing steadily and without issues. This is the last week I’ll feed her big bud, then move onto begin flushing at around day 63. My only concern about this grow is the humidity being a tad high and AVT being so big she’s blocking the light to the babies in the corners. So far she smells like pine/tabaco/funk.

She has stretched quite s bit, really wonderful leafs and she's developing her flowrs little by little, let's see how this performs, I expect the best from gea seeds genetics.

This has been an unusual week. 2 plants are still growing bigger than the other 2, but all are not extending out, but merely creating a tight bunch. And on 2 of them, the leaves are not a nice green, but sort of a drab green almost brown or yellow. I thought I might be over watering, so I have cut that back, and manually putting in some extra when I take my pictures. I also added a bit of nutes to see if that helped, but nothing seems to have changed.