Likes
Comments
Share
@Just_Weed
Follow
I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.
Likes
18
Share
Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
16
Share
Die Pflanze wurde Mitte letzter Woche an Tag 66 geerntet. Getrocknet wurden die Blüten 6 Tage lang bei einer Luftfeuchtigkeit von 53% bevor sie nun ins Glas kommen. Getrimmt wurde die Pflanze trocken.
Likes
18
Share
F66 Humboldt Sour Diesel SD3 only the tops buds swoll. the rest of the main colas didnt fatten up. Maybe it was me or the genetics or just the light distribution? She doesnt smell as vibrant as at F50-55. I dont know if she was ready back then SD2 buds fattened up and since she showed signs of flowering a week later than SD2, it seems she is ready for harvest now as the she smells more vibrant right now at F66 I harvested Humboldt Sour Diesel at F68. SD2:137g wet 25dry SD3: 251g wet 48dry
Likes
2
Share
@Cosmodude
Follow
10/29/20-Day 23 #1) 4.5” tall, nice looking 4th set of leaves. #2) 5.75” tall. All new growth, including lower axillary buds, is yellowing. Green tint toward tips, brown/copper spots on 3rd set of leaves. #2 is taller because is lacks chlorophyll and is stretching to get more light. 10/31/20-Day 25 - watered 300ml each 11/2/20-Day 27 started LST on #1.
Likes
6
Share
i was using bottle water since the firat day but dint realise that the water was filtered (probably) and had only 7mg/l of calcium ,mag and iron. Instead of buying cal +mag (which i will buy for my next grow) i checked other brands of bottles water and found Evian that has 80 mg/l calcium ,25mg/l mag (i know its not worth it but i was feeling safer to use "bottle" water at the begining because it was also phd at 6.5) so my question now is : plant had a cal+mag def . Considering that before i was giving it only 7mg/l of cal+mag now that im giving it 80mg/l of calc and Around 40-50mg/l magnesium just by changing water brand also 4 ml of alg a mic that has cal+mag + molasses that iv started this week 1(tablespoon has around 100mg of calcium) .Do you think it will be enought to fill the needs of the plant? As i said buds are still growing normally and plant has another 14-17 days to still fatten the buds :) Today if seen some orange hairs on them . thank you thank you.
Likes
4
Share
@Andres
Follow
none of this bank has given me an abundant harvest hopefully it can be commemorated with its taste smell and knock out
Likes
11
Share
@Hash268
Follow
The cycle is over now and trust me it was a run I love it, the sugar breath is a must have this strain is top notch, the whole development of the buds is so premium the final product I'll give five 🌟.
Likes
7
Share
Managed to get over 4 ounce per plant the smell is very strong and is covered in crystal, I’ve already harvested clones in the mean time and also got over 4 ounce per plant
Likes
23
Share
Day 50 (1/25/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 51 (1/26/21) Heavy defoliation today, I chopped every fan leaf on each node of the main stalk. Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 52 (1/27/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 775 Water temp: 64°F pH: 5.8 Day 53 (1/28/21) Seeing great growth again, I used a little bit less water to up the ppm Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 800 Water temp: 64°F pH: 5.8 Day 54 (1/29/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 800 Water temp: 64°F pH: 5.8 Day 55 (1/30/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 825 Water temp: 59°F pH: 5.8 Day 56 (1/31/21) Nutes: Veg A: 3.07 g/gal Veg B: 2.07 g/gal PPM: 785 Water temp: 64°F pH: 5.8
Likes
25
Share
undeterred continues to grow ... very slowly surely the growth will be 'longer than normal, but given the forecasts is a pleasure to wait The plant remains very dense with leaves and flowers the dimensions are from XXL, I have not done many plants until now but this is the most particular   I have great expectations ....
Processing
Likes
7
Share
@Sizzler
Follow
They are doing good, even if the leafs are mutate :D The LST and the hydro system are doing a good job.
Likes
39
Share
Todo bien, entrando de lleno en la segunda semana. Hasta el momento solo seguimos con micorrizas del colectivo científico y agua semana por medio
Likes
22
Share
@CBDezz
Follow
The buds on this girl are growing slow do too all the stress she has been thru. I plan to keep this girl in the ground for at least another 3 weeks. We had some crappy weather this week, lots of rain and high humidity. The buds are not that dense yet so I'm not too worried yet but there is more rain in the forecast fort next week. I'm gave her some nutrients as I did the last 3 weeks, There are so many leafs on this plant it's crazy. I have grown 7 plants outdoors now and I have never had one this big so so cropping, trimming and supportiing has been a learning curve. I put some wax in the big crack at the base that you at see in last weeks pictures but not before a bunch of potato bugs found there ways in there which has me very concerned. This plant may end up being used for extracts only but I hope not .
Likes
52
Share
@DevilsBud
Follow
New week for the 2 purple berry Kush I think the purple berry Kush needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
28
Share
You are an outdoor grower ? You'r waiting until the middle of may to bring your plants to your secret spot and wait until September to get a good crop?? Then this strain is for you ! You will have the possibility to harvest up to 3 times before your feminised will be ready and you'll be stocked by the final product ! Only you will be able to know that it is an auto strain, none of your friends will notice
Likes
15
Share
@tokesly
Follow
Started adding PK booster late into week 4. Ideal time to add PK is end of week 2 so the lack of early PK definitely hurt the density formation. These bad boys began to really stretch this and last week - really wish I had setup a SCROG for an even canopy. Oh well, you live and you learn. By the end of the week, the aroma on the plants began to smell really good like Sunny D.
Likes
11
Share
This lady looks absolutely gorgeous, looks like she needed that transplant!, so this lady hss been Transplanted at day 39 since she was planted and I've prepared the 15L pot with the complete biotabs organic line, I've applied 25G of startrex for every 5L of soil, then I sprinkled a couple of grams of mycotrex on the planting hole and after the Transplant was completed I added 3 biotabs slow release tabs and after that just immediately watered with 1G of bactrex per liter of water and also 1ml per liter of orgatrex