Likes
Comments
Share
Semana 0 Del 3 al 9 de agosto Estamos en la semana 0 que va a ser la primera desde el cambio a 12h. Las temperaturas están siendo geniales y los LED ayudan bastante. Estamos en 26°C en ON y unos 24°C en OFF. Vimos que el último riego pudo ser demasiado potente y aprovechamos para hacer varias cosas. • La planta tiene 0 marcas de bichos, ni picaduras ni nada.. parece que los preventivos han funcionado bien, pero no bajamos la guardia. Espolvoreamos la capa de arriba del sustrato con tierra de diatomeas y humedecemos. Como el sustrato ya había bajado bastante, echamos una capa de sustrato ( monkey soil coco) y repetimos volvemos a espolvorear. • Realizamos riego con unos 2l casi. Usamos 0.16 Mammoth P + 1 calmax PH 6,2 EC: 0,4/0,6ms Th20: 23,5°C • Hoy soltamos todo el sistema LST. La idea es la siguiente: dejarle un día suelta descansando para que se estire un poco y luego colocarlas en su posición final. Parece que tiene forma de pino y cada rama esta cogiendo esa forma, por eso quiero estirar la un poco, para que tengan sitio. 5 de agosto Volvems a hacer el LST Pero esta vez con grapas de hierro, aprovechamos para dejar en posición. Mientras la entrenabamos quebrados el tallo central.. 6 de agosto Vemos que se posiciona mejor y aprovechamos para quitar algunas hojas y algún brote pequeño. Hoy a vuelto el calor pero aguantamos en unos 28,5°C de max. La humedad si he es alta, entorno al 70% 8 de agosto Hoy movemos un poco los brotes para que quede menos sombras. Aprovechamos para hacer un riego con 1,5l usando 5ml•l de Delta 9 PH 6,01 EC: 1,2ms Th20: 26,6°C El calor continúa y más o menos aguantamos las condiciones. 28°C y un 66% de humedad. Este riego de Delta 9 le sentará genial, se puede apreciar como siguen estirando los brotes de cada rama para coger su sitio de cara a florecer. Además la planta en general a engordado bastante en cuanto a tallo y ramas más fuertes. 9 de agosto Terminamos esta semana de perforación. Seguimos con el calor y la humedad, en ese sentido a sido un mal día. De temperatura rondamos los 28°C con una max de 30 y mínimas de 24,5°C (en OFF)*. La humedad a andado de 60/70%, esperamos que las condiciones mejoren cuando la flora sea mas avanzada. Hoy realizamos ultimo preventivo, unas 6h com el quemador de azufre para después de ventilar un rato hacer un foliar con 15ml spruzit + 2 aceite de neem + 2 un producto de prueba. Las sensaciones son tremendas y la verdad que nos lo estamos tomando con mucha ilusión porque esta quedando preciosa y respondiendo como un Jabato. El juego a empezado amigos, a partir de ahora empieza lo buenoo.
Likes
2
Share
Little plant. Day 57. Cold and clowdy week. No nutes, just water. Curling leaf tips and dark green leaves. Too many nutes last week
Likes
5
Share
Likes
6
Share
smell is strong now. sour 76 has a range of citrus, number 1 is lemon dominated with fuel scent underneath. number 2 has a smell super similar to tangie! seeing sour 76 parent is cali sour d (cali orange x sour d x mexican sativa) cross to 76 afghan it makes sense to me it has reminiscent smell to tangie (cali orange x skunk 1 [mexican sativa x afghan indica x colombian sativa]) very similar parent lineages there! havin smoke test both, sour 76 is much more heavy handed high! plants finish at 66 days this run. at this point I gave last main feeds before tapering nutes back lower for week 8 and then flush week 9
Likes
2
Share
📆 Semana 9 El cultivo entra en la fase de engorde avanzado, manteniendo una buena absorción aunque empezando a estabilizarse, con el coco aún equilibrado. La planta continúa enfocada en aumentar densidad y rematar el peso final de las flores. Los cogollos alcanzan una alta compactación, endureciéndose progresivamente, mientras la resina sigue en aumento y cubre de forma más densa toda la superficie. Se aprecia un leve foxtailing en algunas puntas, algo sutil y típico en esta fase, sin impacto en la calidad general del cultivo. El cultivo se mantiene sano, con buen color y aromas cada vez más intensos y definidos. Seguimos creciendo fuerte 💪!
Likes
92
Share
Week 4 Veg Report - TrolMaster Chronicles 🌱 What a week it’s been in the garden! We finally transplanted the Papaya Zoap into its final Autopot, and let me tell you, this plant is something special. Though her roots weren’t quite where I wanted them to be yet, the move was needed to help her catch up with the rest of the crew. She’s already looking fantastic in her new home, and I have no doubt she’s about to explode with growth in the coming days. Sometimes, you just have to trust the process, and I’m feeling like this is one of those moments. It’s almost as if the room itself is taking on a life of its own. 🌿 In fact, I’m starting to believe that what we’re building here is something greater than ourselves—there’s this energy in the room, a feeling of everything coming together perfectly. I can’t wait to see how this journey unfolds! Dialing in the VPD with TrolMaster’s Tech Now, let’s talk VPD (Vapor Pressure Deficit) and how I’ve been keeping everything in check with the Tend-X and the incredible (DSH-2U) Humidity Station. VPD is crucial to plant health—it’s all about finding that perfect balance between humidity and temperature to optimize transpiration and nutrient uptake. The (DSH-2U) Humidity Station, connected directly to my humidifier, has been an absolute game-changer in this regard. With its real-time data and automation, it allows me to monitor and adjust the RH with pinpoint accuracy. Simple yet brilliant, the (DSH-2U) Humidity Station is keeping my room at the sweet spot I need. Whether I’m tweaking the settings from my phone while I’m out and about or just fine-tuning things while relaxing at home, this machine does it all. It’s like having an extra pair of hands in the grow room—and when you’re managing something as complex as VPD, that’s invaluable! And yes, the TM+ Pro App—let’s not forget how awesome it is. I’m adjusting my grow room from the couch, the car, or even the bathroom 😜. I’ve said it before, but this app is making growing easier than ever. Feeding the Girls: The Perfect Blend 🌱 We’ve upped the game by adding CaMg-Boost at 0.25 ml/L to the feeding schedule. Along with the 1 ml/L of the all-in-one liquid, this brings the TDS up to 320 ppm, with a pH of 5.99 and solution temperature of 24.8°C. In the soil, readings are around 415 ppm, with temperatures hovering around 25°C The plants are absolutely thriving, and I can already see the difference this new feed is making. I can’t help but have a bit of fun with this process—it feels like I’m spoiling them with the best of the best. And they’re rewarding me with beautiful growth and vibrant green color. You know how it is, with the right care and attention, these plants are truly becoming a masterpiece in the making. 🌱 Shoutouts 💚 Big shoutout to TrolMaster and ThinkGrow LED for the phenomenal gear that’s making this grow smoother than ever. Also, massive thanks to Aptus Holland for their top-notch nutrition, and of course, to the community here on GrowDiaries—you guys keep the energy alive! 🌱 Last but definitely not least, shoutout to all the seed banks supporting this journey. You’ve been a huge part of this process, and I couldn’t do it without you! Remember, for exclusive behind-the-scenes content and updates in real time, head over to my Instagram and YouTube channels @DogDoctorOfficial. We’ve got tons of epic content lined up, and you won’t want to miss it! P.S. Let’s talk about the new Model One LED Bars—these beauties are not only powerful but super efficient. I’ve been able to dim them down, save on electricity costs, and still maintain an incredible PAR and spectrum. It’s all about fine-tuning the balance of power and performance, and these lights make it easy to get the best results while being eco-friendly. Whether you’re running them full throttle or dialing it back, you’re still getting optimal growth conditions for your plants. That’s the kind of innovation that takes your grow to the next level. 💡 Growers Love to all 🌿💚
Likes
44
Share
Finally starting to flower, flipped lights at week 5 for short veg time. Not much smell at the moment but plants are growing very fast. Loving the greenhouse feeds bio products, it couldnt be any easier. Lots and lots of bud sites!
Likes
3
Share
@ohcibi
Follow
Update June, 10th Found fungus gnats on samy. Put a safety yellow card into taktloss as well. Fingers double-u'd that they don’t spread. Update June, 7th Flip flop flippidy flop flippidy flip flop floppidy flop! FFW - First Flower Week. Set the clock to 12/12 today and enabled the „flower mode“ of my lamp which basically just enables the red LEDs. So them plants ended up in the red light district now. This week will be continuing/finishing the scrogging and lsting and waiting for the stretch to set in. Only one row of scrog squares is left by now so the timing should be perfect. Plants looking good and healthy. I’m at week 7 of my fertilizer schedule and fed another 3 liters today.
Likes
12
Share
Ok so had a lot to do this week harvested the large critcial mass to which I got 6 n half 0z from one plant so happy with that i also had a few issues with enviroment mainting right temp and humidty as been a lil issue but think all is well now so there all now on the 7 week of flower think I may push these as far as I can to maximise yield potential overall a real good plant to grow had very few issues from start to finish a top strain a deffo keeper for the garden of mothers in my opinion
Processing
Likes
7
Share
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 01/11/2019 - Started using BioBizz Alg-a-Mic on spray, using it once per day at lights off, 1 or 2 puffs to create a light mist, only on non feed days, I mixed 0.1ml on 100ml water 6.4 PH. 03/11/2019 - Gave her 250ml plain water with 6.4PH 05/11/2019 - Gave her 0,15ml of each BioBizz Grow, Max and Bloom on 300ml water 6 PH didn't manage to get it higher to 6.3 at least. 06/11/2019 - She started to show some pistols, probably entering pre-flower. 07/11/2019 - Soil was to dry due to 2930c temps gave her 0,500ml of 6.5PH water with 0,25ml Grow, 0,25ml Max, and 0,45ml Bloom BioBizz.
Likes
9
Share
Gracias la equipo de Super Sativa Seeds Club, Marshydro y XpertNutrients sin ellos esto no seria posible 💐🍁 Lava Freeze: Con el nuevo cruce de Friesland Indica (M33 para los cultivadores de la vieja escuela) con Lava Cake, ha nacido una nueva híbrida muy sabrosa que te pega fuerte y te deja colocado. En su día, la Friesland Indica original, alias M33, alias Freezeland, se hizo inmensamente popular en América del Norte. En Canadá, se convirtió inmediatamente en una joya entre los expertos de semillas de cannabis. Fue elogiada por su productividad, su efecto y su increíble sabor. Friesland Indica era también muy robusta y capaz de soportar bien el duro clima exterior de Canadá. Esto la convirtió en una variedad recurrente para muchos cultivadores comerciales clandestinos canadienses y todavía se puede encontrar hoy en día en muchas salas de cultivo canadienses. 🚀🌻 Consigue aquí tus semillas: https://dutch-passion.com/es/semillas-de-marihuana/lava-freeze 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Buena semana, los cogollos están engordando que da gusto, las plantas estan totalmente cargadas de resina hasta en algunas hojas exteriores. Se comen todos los nutrientes que da gusto, comienzan a mostrar alguna carencia en la parte inferior de la planta lo que es una buena señal. Continuo con las dosis de nutrientes recomendadas por el vendedor.
Likes
11
Share
Week 4 – Day 30 (VT30 / BT6) RedPure#4 is starting to live up to her name – the first purple tones are showing! 💜 She’s also picked up growth this week – the stretch seems to be kicking in 🔥 So far, no signs of stress or issues. She’s developing steadily and stays compact, but with noticeable progress. Excited to see how far she’ll go in the coming weeks! 🌿⏳
Likes
76
Share
@Canna96
Follow
This week went good, she is still stretching and up to 36 inches tall. I switched over to flower nutrients and defoliated a handful of leaves. Just going to sit back and let her stack flowers. This is my first ever manifold so I am interested to see if this method can increase yield and/or decrease trim time. I should know here in a few weeks. Thanks for stopping by and blaze on!
Likes
7
Share
@Giovi
Follow
Hi guys. We started flowering with the first week! I am very excited! Plants seem to me to be healthy and grow. With Advanced Nutrient fertilizers it is very important to regulate and control the electrical conductivity of the solution. Next week I will give you more information. I put a net in order to divide the light and give a support in flowering. We'll see!
Likes
Comments
Share
End of Week 3—you can see the progress in the video. I'm really happy with the results so far.😁 Northern Sun is a Sour Rot Candy cultivar with over 27% THC and a predominantly indica profile. Fast Buds is the Frostbanger Auto strain. Northern Sun height: 26 cm. Fast Buds height: 16 cm.
Likes
24
Share
Quite good result considering that she only got around 6h of sunlight, the buds didn't grew too big but they have a lot of THC, this is perfect for people who live in the city and just want to grow some small plants on the balcony without getting too much attention, the smell was really sweet and she offers a good resistance against bugs, and i didn't even applied any insecticide. We are going to use this plant to do a fresh frozen extraction 😁
Likes
7
Share
@Cannerd
Follow
Week 6 Vegetation - "Sam" rate of growth started to increase near the beginning of the week. With the nodes now stretching, I've started to implement tucking of the larger fan leaves under new and smaller shoots. I find this "new growth priority" method paired with LST really maximizes and speeds up the growth in comparison to an untrained plant. Merely anecdotal though! You'll notice that in the 3rd shot, the nodes stretched out in about 2 days and just ballooned! now that's what I'm talking about! nearing the middle of the week and the rate of growth is fast enough that I can't remember to take enough pictures between the new nodes. At this point I'm tucking new leaves almost daily, making paths for the light to reach new growth tips. By the end of the week, I'll need to start tying the nodes to the side before they stretch too far up. If they stretch too far before tying them, they can be a PITA to tie down later with dense foliage and such. Tying them down before they get to this point also keeps the nutrients moving to the "new side-nodes" from these branches. Eventually these will be just as thick as the original main stalk. UPDATE: As you can see with the last photos added, the branches are almost even with the original top of the plant that was tied down. I gave them a thorough fertigation the night before, and only slight folding of the leaves so I must have choked the roots a bit, but nothing long term.
Likes
Comments
Share
Hi guys, I got the Cookies & Cream in June this year as a cutting. I let her grow for a few weeks and then started flowering. She was a very, very nice plant, so I decided to reveg her and took a few clones. This one is the mother plant. I harvested her in August this year and then revegged her. You can find the review of the old plant. She was small and it was not a great yield. This time it will be different. Enjoy! YouTube: CannabisStrainReview
Likes
7
Share
@Chubbs
Follow
FBA2504-week 1 of Veg This week has been wild. Once the roots made a foundation the upper growth has been explosive the last few days. Really cool to watch and see the daily growth. I introduce calmag and grow nutrients this week starting at a 1/4 strength. All in all they've responded well showing no burn what so ever. One of them does have some weird leaf structure going on but looks like its fixing itself. Happy Growing