Sundae Driver- (Fruity Pebbles x Grape Pie) under the MarsHydro TS3000.

I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.

She grew fast, was no trouble. Vegged out around 30 days. Pre flower there wasn't much of a stretch because of the Flming. What was meant to happen was she was meant to stop cold in her tracks growing in height, and she was meant to throw out 4 nodes on top, (tis what happens when you Flming) i knew this wouldn't happen but I was hoping for 1 big superbud. But for that, the nodes needed to grow a few CM, especially the 2 end ones and they were meant to grow some and form a nice big bud on top. But I got a funny shaped unformed total bud. Its okay, it's frosty and she grew no issues, took everything like a champ, a bit of nutrient burn, but, I've come to take that with synthetic nutrients. Had a real easy time with this girl. Pity only 1 out of 3 seeds popped. Well, they popped but failed to throw out any leafs and just died. But for what I did get, I'm super happy with the results. Think she's my best looking grow so far. In the pic its 17g and I smoked more than that, how I know is cause all I had left was the top and I smoked more than half of the nodes while it was drying. She's my favourite so far from FB.

Ok so another frustrating week! So this week I re potted her and moved her into "the big house" under new lights (GN Telos 0010) set at 70cm from canopy and perfect environment controlled by temp and humidity equipment. Now because of the cal mag deficiency I buffered the coco 2 times in an 8 hour soak in 150% calmag solution ph'd to 6.1 prior to transfer. Then after draining and getting to the correct temp I moved her to the new pot and topped with a light A+B feed. A day later I fed with the nutrients listed which includes 1ml/L of calmag and again the same the following day. Run off ph is spot on at 6.2-6.4ph, although it was 6.6 when I checked today and growth is great but this damn limegreen cal mag deficiency seems to be continuing. At this point I am hoping it's damage already done that didn't show when the leaves were young. The bottom leaves dont seem to be getting worse and some of the reddening on the stems has gone so fingers crossed this next week will see a change in green because I'm out of ideas, apart from making a foliar mix and trying that I'm stumped! The only thing I can think of is a flush incase of a nutrient lock out but I cant see that being the case as her nutes have been light. Even now with all the nutes she is getting the EC is only at 1.4. Thanks for reading, any comments/tips welcome as always. Happy growing!

They are doing very well and the 2 smaller ones have caught up with their sister. Just gave them a very light tidy up the underside of them. I've done topping and FIMing on all them they are filling out nicely.

Day 56: nutrients like plan Last feeding Pictures are taken on day 56 --------------------------------------------- I found some mold, i cutted 1 hole branch and 2 buds, take a look at the last 3 pics(cutted about 2.5 cm around the mold)😑 increased air circualtion too. She is the only one with mold issues 🤔 By the way she develops super dense buds and is gettig some colour😎👍 Happy growing 🍧🌱

Well week two is going very well both phenos one and two of the purple lemonade are looking very healthy. Pheno Number one has very slight deformation from the seed sticking on the seedling leaves for a little too long. Nothing too serious. They have grown an inch vertically in the past week and I would say they are off to a great start still. Patiently enjoying the growth! Thank you for checking out my diary leave a comment and I'll come check out yours as well! ✌️

Hello again :) it’s day 58 for my girls. I get rid of scrog net yesterday, I was taking every single one out and then I cut some leaves to make more space in grow box :) I spend around 6h with them last night but in my opinion is well done :) bag of leaves gone. I planning harvest around day 85 but we will see what time shown :) take care guys and see you soon :)

She'll be 7 weeks Friday and today is Wednesday July 15th. Her buds are as round as a baseball! Some are 6 inches long and she is full of resin and sticky as hell!

Been away for 2 weeks working away. The first test for the autopots. Well what can I say. This grow is insane . I have 8 plants all are over 160cm. The 3 sweet seeds plants are over 240cm... It's insane. Supercropped the biggest but just chunking up. I'm out of height for lights now so I'm kinda stuffed in a good way. This is not the worse issue to have. I can't get individual pics of plants as there is no room in this jungle. The cheat code is Biotabs and Autopots. Just leave them alone and prepare to be amazed These have only ever had untreated tap water. And I'm talking Lol ndon tap water so not the best. But the biotabs just seem to make it all good No sign of salt build up and no sign of any deficiency. I will give I feed of biopk in the coming week as a top feed but that will be that until harvest. Unless something happens if course..🤪

2024-09-07 This was a very effective Week, it started with Rain an Wind then it turned over to very hot and sunny exactly what we need here. The Outdoor tangie still looks super fresh and green, only minor signs of getting ready the colas are very glitery and you see alot of potential already super frostyhere. the revegetating Plant looks fine too. she produces some flowers.too.

Just a couple of weeks to harvest ✊✊✊!!! The smell is increasingly hypnotic… The genetics are going perfect!! Thank you Dinafem 😍!!

Soaked seeds all in peroxide solution for effortless germination 48 hours or until root pops out 1mm, than I paper towel them for 2 days for tap roots before planting in the medium. Note: Smile now Cry Laterz and FX3 were started one week later. Not pictured in this post. The first 6 popped were lemon cherry pop, which are from S1 seeds I made from 2 females using the stress method. I just raised my flowering temps for one day at 92 degrees during week 4 flowering to make them herm as an experiment and it worked😅! This was during a hot summer and I just shut off the a/c for a day in the room which I usually keep at 77-82 degrees! So I basically tricked them!

Day 34 this lady is running, I can see flowers getting bigger every day, smell started really really soon this time so I already had to add the Carbon Filter. I’d like to close the cycle in less then 80 days. It would be great First flowering fertilisation Ph 6.2 Ppm 631 Day 37 - 9 of flower 🌸 Started blooming fertilisation, I’m keep Giving all-in one from aptus, i think I lm substitute with super pk and I stop all in one. Ph 6.2 Ppm 731 As I’m growing an solito in a 9.2 lt pots with all mix nutrients I’m slowing down with all in one and just giving base feedings, I ll decide later if I should give super-pk for the next weeks Day 40, tomorrow will be feeding days. Sge’s going really well, resin is already showing up on flowers that are several as and colorfull, smell is already there 🤤 Tomorrow update with feedings parameters. Day 41 feeding day Aptus regulator 0,15ml/1 lt Aptus all in one 1,25ml/1lt Aptus Topbooster 0,3 ml Aptus enzym + 0,5 ml Calmag 0,3 ml /L Ph 6,18 Ppm 756 Let’s see

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Quick One is a fast-growing autoflowering strain. This was one of the first autoflowering strains developed. When it was first released, it was one of the quickest growing strains on the planet. THC: 13% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 100 - 150 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 100 cm Flowering: 5 - 6 Weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Strong Indica x Ruderalis Type: Sa 10% In 60% Ru 30% Effect: Physical Climate: Mild —RQS QUICK ONE GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, with a yellow center, let's give her some days in and see what happens next.

🌱Day 64.💚 🌱Day 66.💚 🌱Day 68.💚 🌱Day 70. Hot reason why in UK most grow tent heat up, my grow tent temperature reach already 36 degrees. O lalaaa…I will get experience…😆💚

Ehi ragazzi come va questa settimana?! Tutto bene?! La mia settimana è stata un alti e bassi di momenti di merda ... Purtroppo la ragazza tropicanna ho dovuto toglierlgla di mezzo xké faceva un odore davvero potente ed era esageratamente grande! Purtroppo stupidamente mi sono fatto prendere dal panico dalla situazione accaduta al mio amico che aveva i miei messaggi e numeri sul telefono.. vabbè è andata così ormai.. mentre devo dire che la Cherry cola della fastbuds sta diventando davvero una ragazza tozza e massiccia , con internodi stretti ma robusti! Sta crescendo molto bene , le God sto un po' di orgatrex e bactrex per continuare a fare vivere i microorganismi presenti nel suolo ! Ho trovato delle foglie con macchie marroni e arricciate che sembrano indicare un deficit di fosforo , ma sinceramente non sono ancora così esperto da capirlo velocemente.. spero continui a crescere e riempire tutta la grow , a giudicare dalle foglie a ventaglio davvero imponenti le cime saranno altrettanto grandi spero! Grazie alla luce di Mars hydro sempre di qualità superiore e agli strain di Fadtabuds posso dire che questa bellissima esperienza è potuta divenire realtà !

Week 5 Light cycle=18/6 Light Power=120w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 58% Low Rh= % Rh step=0% Speed max=7 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.3 DLI aim=28-34 EC aim=1.7 PH aim=6.3 Thur 25/1/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0ml/L Ec=0.25 PH=6.4/6.6 Time start=12.00pm Finish time=13.05pm (7×5 minute runs with 5 minute gaps) Total flow rate=200ml/min Flow rate per plant=50ml/min. Total volume made=12L Total volume left=5.5L Total volume used=6.5L Volume per plant=1.6L (Est) Runoff. Total runoff=0L Ec= PH=/ Did not work properly so need to sort it out. Total flow rate=185ml/min Flow rate per plant=46ml/min. Ran for an extra 15 mins while sorting out system. Should be about 200ml/min now (50ml/min each plant). 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 29) 📋 didn't quite get the amount of water it was supposed to. Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #2 (Day 30) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #2 (Day 31) 📋 H=44cm D=38cm DLI=33.5 Raised light about 10cm Increased light power to 140w H=44cm D=47cm DLI=29.5 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 32) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #2 (Day 33)(Day 1 flower) 📋 H=49cm D=42cm DLI=23.0 At 9.00pm increased light to 150w H=49cm D=42cm DLI=24.0 Tue 30/1/24 #2 (Day 34)(Day 2 flower) 📋 Wed 31/1/24 #2 (Day 35)(Day 3 flower)**** 📋 H=54cm D=37cm DLI=27.0 🚿 foliar sprayed (Sumo Boost 2ml/L). She got flipped into flower on day 32, has caught up to the others in height and even overtook one plant. The cola I stuck back on is a lot shorter then the other 4. Back soon. Take it easy.