Likes
Comments
Share
@FoTwenny
Follow
Fo' Twenny here back with another update! I will be updating and uploading more photos through out the week. I hope you'll ride along and give me a follow! The deets: Feeding with .2 ml/gal of RapidStart and .2 ml/gal of SuperThrive, Adjusted pH to 6.5 and then add .25 tsp of recharge. 8/16 - 8 days post sow. All but 2 seeds have sprouted. I was especially concerned for the Melon Gum because I only had a 2 pack and both beans were quite pale. I gently dug around in the peat pellets and found the bean with a fresh, healthy tap root! I expect she should be popping up by tomorrow evening. The other bean yet to pop is the Jenny Kush. I was gifted 5 Jenny Kush seeds, and I will wait until tomorrow to see if she sprouts a tap root before popping another one. Hopefully, I will have more luck with the next one. Successful germination in 16 of 17 photoperiod seeds. With a total of 19 of 20 if you include the 3 autoflowering cultivars running along side. They're being documented in separate diaries and will stay in the veg tent when the photoperiods are moved into the bloom room. Go check 'em out! 8/20 Update: Melon Gum has sprouted. If you're not following my Zkittlez Auto diary, you missed that I almost killed this girl on accident. Graceful me, knocked over her solo cup and she got stuck to a sticky trap. Her stem split in half and I put a piece fabric medical tape to mend her and she is actually growing and doing well regardless of her injuries. All the girls, except Jenny have sprouted and are developing. I planted a new Jenny seed 8/18 and left the original in too, just in case. Please feel free to ask questions or provide constructive criticism. Check back throughout the week for new photos and updates. I look forward to hearing from ya'll. Happy growing! Peace, ✌️ Love, 💚 And Frosty Nugs!!! ❄️🌲
Likes
2
Share
@LST420
Follow
Week 3 I've been feeding the plants some extra CalMag because the Auto Night Queen appears to have a deficiency. And I started with LST.
Likes
37
Share
As of day 50, the plant is pretty much just putting on flower weight and developing terpenes. It is starting to smell of citrus and blueberries which gives me high hopes for it's final taste. It is also starting to heavily produce trichomes, even on fan leaves and stems. This is beyond any autos I have grown in the past, so I have to give credit to the genetics and the hydroponic grow method. As long as nothing horrible happens in the next few weeks this plant is going to produce a really nice harvest. Thanks for reading! 🌱👍 Day 53: it has developed a strong and distinct smell of blueberries.
Likes
Comments
Share
Exploding with growth happy looking so far any thoughts guys
Processing
Likes
6
Share
@Moss420
Follow
Added the first screen into the tent. Decided to kick Big Mumma out because she just wasn't growing any taller and the other plants were really over growing her. For the new setup I used kitty litter trays and mesh to sit the plants on - each plant gets its own tray so I can track runoff EC individually and I cut little flaps in the mesh so I can wet vac the runoff. With this setup I shouldn't need to move the plants out of the tent until harvest. For the scrog I just tied some builders rope around the poles of the tent and tied the trellis netting off with training wire. I've been manipulating the growth just to try and fill out the whole screen, I also gave them a good haircut because I plan on flipping them soon, don't want them to outgrow the tent.
Likes
Comments
Share
Both plants still getting bigger buds - more than i expected. 💪Trichomes did not change that much, paapya's got a bit milkier now. I cut of a few yellow leaves day by day on both plants. The upper yellow leaves are because of to much light intensity - the ones below canopy are a sign of the plants going in their last days before harvest. 😎Just want to mention, that both plants almost got no Cal/mag problem, only just a few parts of leaves have this issue. 👌
Likes
6
Share
No deficiencies thus far adding some molasses each feeding 1 tbls per gal water
Likes
9
Share
@Lazuli
Follow
She starts to drink a lot now , final week stretch then she goes full flower
Likes
19
Share
@Lickey
Follow
Buds fattening up and pistols turning orange. Some floral, skunky, diesel smell but nothing crazy, which is nice. Looking at the trichomes at Day 45, 4 weeks before planned harvest, they are looking milky. Which is weird. Maybe I’m wrong?
Likes
42
Share
Hi guys I hope your all doing good. So this week I am expecting some nice stretching and filling out. I topped them once today and will top again in 2 weeks. I have feed them there 1st dose of biobizz grow and some all a mic for beneficial bacteria. I'll keep you all updated as I progress. Happy growing 💚👌💪
Likes
35
Share
@SooSan
Follow
90x60x140 (Mars Hydro) FC-E4800 (Mars Hydro) Easy2go Aquavalve5 (Autopot) Living Soil (Demetearth) Bruce Banner (PEV Seed) Gorilla GG4 (Ganja Farmer) Cream Caramel (Sweet Seed) Gorilla Gelato (Ganja Farmer) Blueberry (00 Seed) Kalini Asia (Zamnezia) Banana Frosting (Sensi Seed) Biscotti Mintz (Barney's Farm) Blackberry Cake (Sensi Seed) Amsterdam Amnesia (Dutch Passion) Gelato Cookie (Ganja Farmer) Purple OG Punch (Ganja Farmer) Sweet ZZ (RQS) Rainbow Road (Paradise Seed) Substrat ~50L: 30L Super Light Mix Biotechnologie 18L coco 2L perlite 1,7kg lombricompost 350g guano de chauve-souris 350g Zéolithe 350g Basalte 170g guano vers de farine 170g biochar 0,7g Endomychorise glomus intraradices 0,7g Bacillus Amyloliquefaciens Paillage de luzerne alfalfa Arrosage avec 2ml/L de mélasse de canne 1x par semaine
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
2
Share
Had an unexpected 50 mph thunderstorm strike last Tuesday. It broke one Sour Strawberry plant in half. The RuntzLayerCake was bent over thirty degrees. Many limbs broken and bent on the plants. I had to duct tape several main stems as you’ll see in the video. The four caged plants proved stability for the others. Second grow. Lesson learned. All the plants are now trussed with string and are very healthy. Thanks for looking in this week, and let me know your thoughts.
Processing
Likes
12
Share
Van algo ralentizadas, pero en que trasplantemos pegarán su estirón Ya veremos cómo se comportan estas semanas.
Likes
18
Share
Los Últimos días de vida de la planta ya casi no la regaba, por falta de tiempo y para no generar humedad ambiente, días lluviosos con cortes de luz nos jugaron una mala pasada por eso se decide cosechar, las flores se ven hermosas de colores morados con verdes y amarillos de las hojas más viejas. Un cultivo sin estrés, aplicando productos nuevos y viendo muy buenos resultados. La única decisión mal tomada fue haber lavado raíces tan temprano, podría haber ganado algo más de peso con el monster bloom. Completado el secado se procede a pesar, excelente resultado, de 1 planta 125 gramos de flores secas sin palos, estoy muy contento con el resultado de una sola planta.