What a joy this grow has been. She was a real beauty. Absolute joy to grow...strong branches but she likes to stretch a lot. I knew wat to expect. I have grown Lemon Kush outdoors 3 times. The scrog this year was the perfect solution. I will not grow her again outdoors. This was my first time to see her finish. Seeing her flower this year, she just needs the warmth in the end. The climate here rarely offers that. I must say the dense flowers are amazing also size and yield is incredible. Update about that later. Trichomes were underdeveloped. I had to harvest early because of mould. The last 3 weeks of flower the temperatures were very low 10-15 C daytime and very very wet. I believe this stunted the plants. They made a full stop in development and exploded again in the last week. 3 days of sun did more than the 2 weeks before. Weather forecast were bad so big buds were harvested 25 september. We eventually had more sun than expected and bottom half was left until 2 october. That week made sooo much difference!! Those bottom buds finally developed some nice trichomes and turned purple. Of course I wish the big buds could have enjoyed the sunshine during that last week as well. Most of you will know, being an outdoor grower...Every year is about compromises. This year was so hot during growth and cold and wet in bloom that mould was unstoppable. After all I am very pleased with this grow and cant wait to taste some of this. Probably needs al long cure though to bring back that lemon scent. Almost seems like all that the rain washed the scent right off her😪 Keep growing y'all!

She is in flowering stage. So far she is growing very nicely and no issue with her. She should stretch this week much more

Soil: BioBizz All•Mix Almost all products I use are from BioBizz. About a month before germinating I have wetted the soil to let the microbes start working. On January 1st I put some of this earth in 3 plastic cups with holes on the bottom. I wetted them with ph regulated water with H2O2 to kill most microbes, fungi and diseases. I inserted the seeds about 2cm deep and poured ~3ml water directly on top. I have a plastic dome that I wet 2 to 3 times a day to keep the humidity above 60%. It’s now day 5. I don’t water the soil, because it’s still very moist. Currently waiting for the roots to reach the bottom of the cups.

* Day 43- watered with recharge. And sprayed with neem oil + half a teaspoon of dish soap. As a preventative measure to pests and pm. Will give another spray of this the day I flip to 12/12. Also changed light cycle to 18/6. Will flip to 12/12 on day 49. * Day 44 defoliate lower part of all plants. Continued with more lst by pulling down the tops. * Day 49 got it’s last spray before switching to 12/12.

Very good strain to grow would recommend to everyone, very beautiful hash flavours taste dense buds definitely going to grow again

All getting top heavy, had to tie alot of them up. Buds are nice and dense and have taken well to the nutrients in the past few weeks. 2week ripen and flush starting 7/2/21. Nice frosty buds on all of them and my favourite plant still standing out has to be the zkittles OG. On the other hand the do si dos smells like it packs a punch! Update 11/2/21- will be flushing for 5more days then leaving in darkness for 3days before chop.

Day 71: I'm afraid she is foxtailing, maybe due to the high temperatures of the last few days, was impossible managing to maintain the temperatures stables in growing environment. I'm going to water her more often to reduce stress. Day 72: watered with PHD water Day 74: she looks like she is still in full flowering, watered with PHD water. Day 75: she is foxtailing, today I saw more mature pistils than white. Checked the trichomes, looks like she is almost ready. Day 77: watered with PHD water

d14 -slow growing flower exploded :) d15-flowers growing rly fast i can just wach nothing to do yet :) d17-*fiming* one plant(smallet) with smallest pot for some tests d18- spoten first pistils alredy.... pre flowering i guess d20-flowers looking good growing fast :D d20- started with some LST d21- Changed MH to HPS and 20h light to 22h light. d21-This week was nice,didnt do any big changes plants growing nicely onley 1 flower growing complety diffrent then others...all have 4new stems every way this onley have onley 2.....then all have 1 main cola on top this one looks like will have 2 main colas...(4 or 6 now when i FIM it ..will see if i even fim it curecly ) Thats all! Was fun and i cant wait for harvest day!!!!

Getting close to the final harvest weeks now so time to start checking the trichome development. Backing off the feed amounts also Hoping they finish well 🤞🏻😬

Last days for most of them - only Strawberry Cough will stay longer - she is super hungry and I can not keep up with feeding her - most of leaves are yellow now. 😱 The rest - four plants will be harvested on the weekend - 2-3 days from now and frozen - I'll be making bubble hash and fresh frozen live resin from them in the following weeks 😈 Trichomes are mostly milky with some amber starting - ideal ripeness and time to freeze those glands

I’m still away on vacation, but my friend stopped by last night to check on the plants, and will come back today to tuck some of the new growth into the scrog. Will try and update again later this week, happy holidays! F11 update: Got some pics from my friend, plants are doing great and were just tucked into the scrog. Both of us were amazed at how much that back right branch grew overnight, at least 4 inches, the flowering stretch is real! Only a few more days of weaving the plants into the scrog and then it'll all upward growth from there. Cheers, Super D F13 Update: Got some new pics from my homie today, plants look great despite me not being there, slight unevenness to the canopy in the back but that's not too much of an issue. Nothing much to report besides this, hopefully the pistils from the flowering buds will be more visible soon.

Easy week, with some photos under UV lights (i used a UV torchlight) make those girls look like corals. One or two more weeks to go.

Well I got my Mars TS1000 and 2x2 tent and I'm replacing the TS1000 with HLG 135w QBB288 V2 rspec! I like the TS1000 but I wanted something to handle flower better and I've ready so many solid reviews for HLG products, plus they are local to me in Canada. I also decided I need some more room so I'm swapping my tent from a 2x2x4 to a 2x2x4.7 for a bit of extra height. The plant seems to be loving the new space, my new baby (RQS Royal Cheese freebie) is growing a lot faster under this light, new diary coming up!

Acionei mais um led de 240w para complementar, o cheiro está ficando maravilhoso

Week 18, and my buds are on a growth spree – they're growing and growing, reaching for the stars! But here's the funny part – I can actually smell them now when I open the tent. It's like a fragrant leafy surprise every time I peek inside. As I watch my buds plump up and expand, I can't help but feel a sense of awe and wonder. It's like witnessing a tiny leafy miracle unfold before my eyes. Here's to Week 18 – a week of growth, fragrance, and the pure joy of watching nature at its best. Cheers to my amazing garden – may it continue to bloom and delight in the weeks to come! 🌿🌼

Bonjour mes amis, ...Le 18 Juin 2021..Jour #78... ...Flowering Day #3... Début de la 12 semaine et deuxième jour de floraison pour mes trois Edam Bomb Feminisées. Tout va pour le mieux, je les ai rempoté dans des pots de 19, 16 et 14 litres. Je suis déçu des pots de 11 litres, je trouve que ce n'est pas assez pour le travail que je veux faire.. J'ai incorporé 5gr/litre de BioBloom de chez Green House Feeding. Du coup je leurs donne que de l'eau et une fois tout les 15 jours du Bio-Enhancer. Éclairage : Mars-Hydro Tsw 2000 à 50% de puissance et à 50 cm de la canopé. Voilà c'est tout pour l'instant mes amis. Merci à vous d'être passé par là.. Prenez soin de vous..😘 À bientôt..

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.