The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
OK, so we started the 6th week and the plant is showing some growing signals. It's impressive how a plant that looks really bad, can actually keep growing and developing itself. This week I've started to see some development on bud zone/spot, and I believe that even making some mistakes ate the beginning, I'll be able to taste some buds from this little girl.
Processing
Likes
31
Share
@NorCal311
Follow
11/11/19 - All is good in the hood. I love comming back from a couple of days away to see how they look. I did dome defoliation last nigh. Took off some lower branches and leaves. Mostly spindly branches. They are loving the feedings. 11/12/19 - I figured out something tonight with my lighting. I think I have it too low since the plants that right under the light are getting a little bleached and are a lighter green then the plants that are not directly under the light. So I moved it up as far as it could go w/o modification. Let's see what happens. 11/13/19 - From the responses to my question that I received from the pros today, I moved the light back down to 24". 11/14/19 - Did a BUNCH of defoliation tonight. With the SOG it was hard to get under everything. I opened the tent all the way and crawled inside to see so many little stragglers. I hope they do not get shocked too much. I also posted a new vid tonight. I need to do some better lighting next time I will try my headlamp. 😀
Likes
8
Share
She is almost there as most trichomes are cloudy. One more week on nuts then one week flush and harvest time. Should be enjoyable harvest as the plant is quite small but pack so I will trim it on the plant 😁
Likes
19
Share
@Freedonia
Follow
Day 67. Finally I have decided to harvest a part of the plant first and let the other one mature a few more days. Because i left the other part of the plant maturing I cant use the cabinet to dry her. So I had to make room in my closet. Humidity is 45-55% and I have added a small PC fan to move the air a little ... the last time I dried there it took at least 10 days. I'm happy with the result to be my first minigrow. The development of the plant has gone well despite my screw-ups and has given a lot of buds, I hoped they would have been a little more dense, but it was my fault to subject the plant to an excess of nitrogen. Let's see how the second cut is going, I hope they get more fat :D 1st cut weight wet: 110 gr. Minigrow 2.0 will be much better!
Likes
24
Share
@3lementa1
Follow
This is the 8th week. Thursday will be 9 weeks of 12/12. Some trichs are amber. They just added a good bunch of girth over the past few days, but most of the pistils are red now. The rest of them have been dropping leaves consistenly but the canopy remains full so they must be putting out more leaves. I just flushed to 80% runoff and found out that I had 1200ppm. I just got an ec meter but my last reading said closer to 600 so idk what happened there. I flushed until I had runoff ppm of about 150. Now they're back in the grow tent. I don't want to keep assaulting them with my microscope. I think they're ready. Just gonna let them settle another day or two to dry out a bit. I took one small branch off the small Wedding Cake plant on Thursday and I've just been watching it dry on my counter. It's been 5 days and the stem snaps but still leaves a fiber connecting. I put it into a small jar with a 64RH thing. I just want to try it. It already smells amazing. The leaves on the big CBD Blue Shark plant are going really yellow and some other colours are starting to come out as well. The buds all fattened up and got more frosty again. I was worried they were foxtailing but they got more calyxes underneath the peaks and have been making more of a pyramid shape. They're really close to peak. Harvest day will be March 17 or 18. March 17 1023pm chopped and hung after lights off all day. RH was 65% before I chopped and 50% after I closed the window and cut the plants off the saturated pots. I did a wet trim to prevent mold. The buds are sticky af. Gonna hang them to dry for 7-9 days before curing in jars :) March 18 : checked the RH when I woke up and it's chilling at 45% 😎 March 19 : just checked to see how they were drying. There are seeds in every plant. RIP I'll update when I put them in jars and again a few weeks later for final review. Overall it was a good grow despite the rocky start and a good introduction to the mainline technique and my new grow space. Next grow I should have everything pretty well dialed in. March 23 They were hanging for 3 days. Rh was around 45, then spiked to 65 overnight when I forgot to turn the fans back on. Temp was high at around 26.they felt wet after 2 days, and bone dry after 4 days. The stems still didn't snap but I put them in jars anyway. A day later, jar RH was 50%. I burped all the jars and there was a smell from the new jars. I took all the weed out, washed out the jars, and did a dry trim on the weed. One of the Wedding Cake plants must have gone hermie. I didn't see any bananas and didn't even realize there were seeds until the very end. The seed pods looked just like calyxes while the plants were growing. Many of the nugs are unusable. Under the sugar leaves are just layers and layers of seeds. Some weren't hit that badly. The CBD Blue Shark is much better off but still has some seeds. I'm trying to stay positive. It's a bit of a shock though. I'm anxious to try the finished product. If the flowers at least taste good and have a good effect, all is not lost.
Processing
Likes
9
Share
@Kushizlez
Follow
Day 60F The PM on the cheese has gotten significantly worse in the last few days. I think it may have something to do with the constant humidity spikes every time I water. I haven’t been running my humidifier at all in flower so maybe it’s having trouble keeping the RH up during lights on. Just another reason to follow a daily watering schedule. The cheese and slurricane look fucking disgusting and I’m starting to doubt that a peroxide wash can totally fix it. It worked well for my outdoor crop so it should be fine but this time there is probably 3x the amount. I’ll make sure to really soak the buds and rinse them off good. Bbb#1 is flopping over like crazy from the weight. Too late to stake it up now so hopefully it holds until next week. Starting to foxtail a bit but nothing too bad. It is now 100% done and ready for chop. Bbb#2 is just getting frostier and frostier by the day. The purple fade is really coming along nicely too. Might reveg. It is now 100% done and ready for harvest. Black garlic #1 is finally filling out! I can’t believe it. Never heard of a plant packing weight on like that in week 8. The breeder did mention that it packs on weight later but I’m stunned. Taking her to 9.5 weeks. Black garlic #2 is looking very average. Average color, average size buds, average frost, average smell, probably an average yield. And it’s starting to get a bit of PM. Overall not happy. Will be taking her to 9.5 weeks. Zkittlez #1 has pleasantly surprised me. It was a bushy runt in veg but came through. It’s the third frostiest in the tent, super dense, stacked tight, smells great and looks great. It’s already got a nice amount of amber so it’s 100% ready for chop. Slurricane #4 looks insanely frosty even under all that PM. If I can’t wash it off it’s going in the trash. I want to chop this asap but have to cut everything at once unfortunately. It’s 100% ready for harvest. Badazz OG cheese is looking like a decent yielder but doesn’t have much else going for it. I think it still has some filling out to do. I can’t even smell the final profile change yet. The leaves are rotting off very quickly. Taking her 9.5 weeks. I don’t mind harvesting a bit later rather than early. From my outdoor experience, when a plant is picked early it smells like hay and wet grass clippings until it’s been curing for 3 weeks. When I harvest late or at 30-50% amber trichomes it smells like same scent profile it had when growing. Just my experience. I’ve read that the tobacco industry adds calcium and potassium carbonate to their crops to help promote fire holding capacity and to increase the whiteness of ash. Turns out some of the organic amendments I bought last week contain exactly that. I’m going to give each plant a light top dress to see if the tobacco industry is onto something.
Likes
16
Share
Flipping to flower Topped a week ago with 50/50 all purpose and power bloom Watered with microbial tea that was brewed for 18 hours.
Processing
Likes
1
Share
week 7 first flowering week when I finally discovered my princess was actually a prince. 12/12 flowermind ferts (6ml + 0.5g) LST + defoliation started seeing some thrips again, but just a few, nothing to worry so, the plant stayed for 4 weeks in the tent, under COB LED 200W.
Likes
10
Share
Not too much on the scale but the terps and the intensity of the smoke is great. Two very distinct phenos that makes it so much interesting to understand the differences between.
Likes
33
Share
@Belverde
Follow
Welcome growers First fourteen days of flowering ended for these two BLUEBERRY CHEESECAKE 🍰 The flowers are scattered and are more or less at the same ripeness for each 🌻🌻 Ten days ago the plants were suffering a little and now they show some difficulties.. But that's nothing too worrying ! In these cases there will be "problems" only at the level of final yield.. But I think I saved them in time 🏥 We will see in the coming weeks.. About nutrients 👇 I still giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) , a little bit of P-K 3-5 (Bionova) {in spray solution } , Fioritura (Biomagno) and Bloom vegan (Bionova) Like i usually do, a little bit of everything at any watering 💧 And that's all.. See you next 📆 Thanks for stopping by 😎👍👍 FC ✌️ 🇮🇹
Likes
11
Share
Likes
7
Share
The week was crazy, a lot of height growth that is bad, because i don’t have it, but overall looks good and let’s see what will come, hard defoliation has been done, hope last one ;p
Likes
59
Share
Likes
76
Share
@BB_UK
Follow
Start by saying 2 are in flush now! (Black cream and sunset sherbet) I used flawless finish on them and then water from then on! Started to see some fades within a few days with the black cream and sunset sherbet leaves have lightened up, just awaiting some fades! And I’m watching under a 50x loupe to aim for the perfect harvest! The aromas are crazy in there got all sorts going on until I touch one and identify it’s aromas but as expected everything is going to be full of terps and resin! On the end road now! Flush next feeds for the purple punch and forbidden runtz! I’ve added a picture of the royal creamatic I took out as it’s just jumped into flower! Glad I took her out now too as she has some coverage and I wouldn’t want to lose no light at this stage! End result with dynomyco! IS… use it highly recommend. I’m using it in all my grows from now on! It’s a great additive providing your plants with a lot more beneficial bacteria that aid the myco and allow the plant to uptake nutrients better and gain a lot more stability so it’s a must! Contest or no contest I’m glad I got to use it or how would I have known! Thank you Ari 🙌🏽🙏🙏🙏💚
Likes
101
Share
I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!
Likes
1
Share
Tip of the day: Never let an AI try to set nutrient ratios. The plant on the left is yellowing significantly compared to its neighbor, even though they are both on the same feed. Nutrient rates have since been readjusted to try to help the yellowing plant. I may lose some yield, but hopefully, she pushes through. There are five weeks left until the first yield in nearly two years, with another run right behind it: two clones of the same strain, which will complete the perpetual winter cycle. That will be a wrap until October of 2026. Happy growing, everyone!
Likes
34
Share
@Roberts
Follow
Auto moon rock is starting to make some progress. She is looking good, but had a slow start. She will get her first training in a few days. Thank you Divine Seeds, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g