Likes
Comments
Share
She’s still a little burned. But growing very slow. Not much sun... cold, wet and windy Weather 👎🏻 Close to - 1 this morning... Think i gonna chop her Down before the rainy weather or the cold one kills her... But the buds are still so tiny Need a least 1 month😕 Any inputs guys?
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
7
Share
16th july: we germinated this wonderful cherry cola 17th: we transferred small seed with first tiny little root to a peat pellet 18th: nothing happened 19th: nothing happened 20 July: the small little plant appeared! Great news 😁 21July, the plant is totally up, looking for sunlight and have its first true pair of little leaves starting to grow, we transplanted the plant to a 15 liter pot and placed her next to the purple banana 😁 day 1 of the first week started officially
Likes
27
Share
Getting heavy, so tying girls up, stacking nicely 👌💪. Lowering A+B gradually. 2 x mothers are getting extra feed than the 6 cuttings & are slurping all that extra Shogun goodness up fast. EC in and out stable. Starting week 6 with a PhD plain water flush.
Likes
14
Share
This plant looks sooo cool!! I´m goin 2 top her again only on 1 side. Try a cewl shape 😎😎😎 2nd time topped, only on 1 side. I´m goin 4 a scorpion look 😉 she looks wir war
Likes
18
Share
@Carmgrows
Follow
Deluxe sugar cane was amazing to grow from beginning to end. It’s an easy plant that recovers well. The smell gets strong after 2 weeks of cure. One of the best grows I’ve ever done.
Likes
18
Share
Likes
25
Share
week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress
Likes
13
Share
@Erratico
Follow
Día 19 de flora: Los cogollos van tomando forma, las plantas han estancado un poco su crecimiento y comenzado a engordar, se riega cada 2 días con 1 litro por planta, también se realiza constante defoliación para que le llegue más luz a las flores y esta semana comencé a utilizar tabletas de co2 en el aire.
Likes
15
Share
@DRO420
Follow
Week 2 of Flowering plants are doing there final reach. I defoliated one plant that is out of control growing fast..lol.. in hopes to stunt it a little . Everything is going well I'm very surprised at how much nutrients these girls need. I feed them every watering or they start to wilt and yellow. Crazy .. I might try to slow that down now that the leaves are very rich in green color. No signs of burn only deficiency Wich I corrected by feeding them every watering.🤷
Likes
6
Share
Dealing with some deficiencies but still looking okay
Likes
112
Share
ALRIGHTY THEN REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 We just hit week 9 and all is well , have to admit shes just killing it on the resin development 😃 ......the frost is insane 👹...... 👉 her baby Sister and it's coming along very well , I did little defolation last week 😏 shes is about 7 weeks now at 49 days from seed ...👈 she's also killing it 💀 Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 CHECKOUT MY GROWMIE Green_fiend 👈 AS HES JUST A WEEK OR TWO FROM HARVEST ON HIS AFGHAN KUSH DIARY 👈 👉IF ANYONE IS LOOKING FOR A PLACE TO HANGOUT VIA GROWDIARIES AND TALK GROWING AND JUST CHILL AND WHATEVER .....👈 👉I CREATED GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!
Likes
7
Share
She is definitely gave me a run for my money loved her in the beginning her veg stage she had that structure where your like she gna be your favorite plant but really she had alot of magnesium problems and then started growing funky one leaf 2 leaf and even 3 leaf goin on even in late flower but I really like this cultivar the terps really smell of baked goods she got super swollen caylaxs just frosted out chunky
Likes
30
Share
I don't think I could have got 6 of these in my grow space they need a lot of room and airflow. nice strain looking forward to testing the strength.in my TCHECK METER. 18.2% THCa. lesson learned on pruning airflow and RH all very important I caught the bud rot right away I will keep a close eye on the dry and cure for mold. fingers crossed I will not have it. going to do a sulfur burn in tent and garage to reset for next grow. 000
Likes
11
Share
COMMENTED BY MadeInGermany MadeInGermany 8 minutes ago Flowering day 12 since time change to 12/12 h. Hey everyone ☺️. Once again a wonderful week goes by 😀. It has developed so far and is now slowly starting to develop its flowers :-). As soon as the first forms of buds can be seen (I think in 5-10 days) 2 g GHSC Powder Feeding Bio Bloom per liter of substrate are added. In the third week, 1 g per liter of substrate is added so that it lasts through to the end :-). This week it was poured 3 times with 1 liter each 👍. The entire tent was also cleaned and the electronics checked for functionality. The humidifier was refilled every day and fresh osmosis water was drained into the tank for the coming week ☺️. The plants have all been checked for health and pests 👍. Next week the bamboo sticks are inserted towards the end for support and the lowest shoots are removed so that at the end the energy is not wasted in the lower area 👍. Otherwise there is nothing more to report this week :-). I wish you a lot of fun with the update 😎. Stay healthy and let it grow 🍀. You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
17
Share
SO HEY GUYS THE UPDATE!!!!!!!!! 1) Switched from the small pots to the 5 Gallon Fabric bags. 2) Using MORE LST as much as I Can lol 3) Using Advanced Nutrients ph GROW and ph Mircro 4) Started incorporating Purple Cow Organics : Indicanja Living soil its fire!!!!!!!!!!!!
Likes
19
Share
@Selkot
Follow
I didn't make life easy for my autos... topped 2x, repotted 1x, several defoliations, bad water stress for 2 weeks, moved to another tent... I couldn't hope for a miraculous harvest but I'm not complaining at all: in only 10 weeks from seed to harvest, not far from 58g dry, with dense and frosty nuggets, and a nice smell that fills my room as soon as I open the jars 🤩 I won't wait long for the smoke test 👌