The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@Zamzam974
Follow
Salut les cultivars sa roule ?! C+29 a C+38 début floraison je pense... Sa pousse bien. Bonne vigueur des autofloraison surtout la critical... Arrosage tous les 3 4 jours 1litre par pot apport de mélasse à chaque arrosage... J'ai jouter deux ampoule une Led de 15w et cfl de 23w équivalente à une 100w la Led fait 4000k 1500lumens et la cfl 2700k 1500lumens la plante transpire pas mal mai pas de souci de moisissures... J'installe la cfl 250w 2700k quand la floraisons sera bien démarrer... Tous conseils sont les bien venu merci je c'est pas si je vais a 12/12 pour la wombat qui est féminisé pour ne pas perdre en quantité sur les auto qui et mieux 18/6 sinon bouturage pour la wombat je suis dans l'impasse total pour le moment 🙄
Likes
14
Share
After I repotted the plants, they grew really well and healthily for 12 days. Now they are showing iron deficiency again... I already had the problem before repotting. The pH value of the earth has fallen again to 4.8 to 5.7. This time I used biodegradable braids to germinate. I believe that this is the reason for the PH fluctuations in the soil. Every time I water I measure the PH and adjust it to 6 - 6.5. Nevertheless, the PH value drops back to 4 to 5. I'm trying to correct the problem. I also work with neemoil because I can't get rid of the trips
Likes
27
Share
Vamos familia, hora de cosechar estas Biscotti de RoyalQueenSeeds. No veáis que pinta que tienen las flores están bien formadas y repletas de tricomas. Después de 70 días de floración obtengo estas flores tan increíbles que huelen pfff. Es una variedad un poco complicada de cultivar pero, que al final si da sus frutos. Bastante contento con este primer cultivo de la temporada de indoor. Dar las gracias a james por las genéticas dé RoyalQueenSeeds, y a todo el equipo de Agrobeta, que sin vosotros parte de estos proyectos no son posibles 🙏 Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
Comments
Share
@Lynx_361
Follow
16.06.2025 The Plant's had a ruff time with me recently! I lost one branch from Number 1 (the short one in the middle). And I had no Time to give them the needet attention..
Likes
2
Share
@fabialien
Follow
Comenzamos esta aventura el dia 1 Agosto 2024. Hidratare por 24 hrs en vaso de agua con agua oxigenada, posteriormente pasaremos a servilleta y dejaremos se 24 a 48 hrs para pasar a maceta. Lunes 5 de Agosto hacemos trasplante a maceta definitiva.
Likes
7
Share
Questa pianta e veramente profumata di fragola cazzo!! E la prima volta che sento una varietà così profumata é ricoperta di tricomi OVUNQUE al momento sono tra il trasparente e il bianco latte, ho cambiato big Bud con overdrive per vedere di ingrossarle un po' di più, ho diminuito il grow aumentato il factor X vediamo cosa ne esce fuori! Comunque fast buds non smette mai di sorprendermi!!! Io coltiverò per tutta la vita solo le loro varietà!!! 😂 Non sono mai stato deluso dalle loro genetiche promettono quello che dicono e a volte anche di più!!!
Processing
Likes
5
Share
Very good strain, the 3 dark devils that I have got tje same citric powerful aroma, very very sticky flowers. I'm very happy to have this ladies in my garden. Very recomended automatic plant strain, she also makes my garden much more colorful. 🤞🌱👨‍🌾💚✌️❤️ Peace!
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
1
Share
Likes
36
Share
@ZigkGrow
Follow
Week 5😃 Unfortunately, I am visiting my family for Easter so there will not be any update after Day 29. Some bad news : I accidentally broke the main canopy. I tried just to bend her a little lower and it snapped. I taped it and hope it recovers🙏 End of Week Update : Finally Home. So what happened these days. 1st : The plant wasn't watered at all (auto-watering system still on the making) 2nd : Main Canopy didn't mend herself after getting snapped 3rd : Still keeping good vibes and energy 🤘
Likes
57
Share
13 hrs and 33 mins of daylight when I took these pics on 8/27 There's not much to say other than that this Girl is a beast. I'd say she's pushing 7 feet, I've been just guessing height, but I should probably get an accurate measurement on the plants next week. It's hard to get her in frame! I was a bit lax with feeding this week so her color isn't as good as it could be but I should have more time going into September to really put the juice to these girls so they have a strong finish💪
Likes
14
Share
Posting the phenos when I do them
Likes
15
Share
Not a massive harvest by any stretch but the bud I sampled so far was outstanding... I'm glad we grabbed many clones of this strain... Happy growing everyone :)
Likes
13
Share
Léger brûlures de noix pas de nutriments cette semaine irrigation uniquement a l'eau.
Processing
Likes
1
Share
Wk 5 was Steady Away, Explosive growth starting, Transplanted one from aero to coco and added Began the Scrog As you may have noticed, I Expanded the garden to give the coco girls some more room. The Dawg in the aero wasn't taking well at all, she hadn't really had a good innings from the beginning. I transplanted her into the coco and Fed her very week nutes..
Likes
29
Share
@nonick123
Follow
Día 41 (03/06) Riego 750 ml sólo H2O pH 6.2 Empieza a engordar sus cogollos 😍 Día 42 (04/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Está apilando y engordando sus cogollos, y empieza a mostrar senescencia en la hojas inferiores. La veo capaz de acabar en 8-9 semanas! El tiempo lo dirá Día 43 (05/06) Riego 750 ml sólo H2O pH 6.2 Día 44 (06/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l +TopBooster 0,2 ml/l - pH 6.2 Día 45 (07/06) Riego 750 ml sólo H2O pH 6.2 Está empezando a mostrar tonos morados en los cogollos! 😍 Día 46 (08/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 El tamaño del cogollo central es impresionante 💥😁 Día 47 (09/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
12
Share
He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our Purple Urke have started, really smooth as silk, no problems with the placenta, it's there nice and straight going towards the light, we trust you a lot baby! It's like most purples, an Indica predominance. WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or the placenta prevent the opening of the cotyledon leaves the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea, remove slowly and delicately please. WARNING: If you choose biodegradable pots, choose the largest possible ones and not paper/cardboard ones, there is peat which is the main component of most of the soils we use. If you want to avoid transmitting vibrations to the neighbors I recommend you install one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations of the equipment or of any kind. Everything will be grown Plagron Pro Mix with 100% fertilizers let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/en/11168-zamnesia-seeds-purple-urkle.html Zamnesia Description // A direct descendant of a Mendocino Purps phenotype, Purple Urkle is a high-performance cultivar from Zamnesia Seeds. This feminized, indica-dominant strain is sure to win over any cannabis grower. With a THC content of 20%, Purple Urkle has a lot to offer from seed to harvest and beyond. A grape-flavoured adventure, Suitable for indoors, outdoors or in the greenhouse, Purple Urkle is a very resilient strain. Growers will be impressed by how easy this cultivar can be managed. Purple Urkle can reach 120cm indoors and 160cm outdoors, but if you want more control over the height you can use the LST technique. Purple Urkle has fantastic flavours and aromas that intensify during the flowering phase. Regardless of the method of consumption, Purple Urkle offers tangy, fruity flavours that lean towards notes of grapes, berries and plums. The effects of this strain are soothing and relaxing, with uplifting sensations that make the experience suitable for any occasion, whether in a social setting or alone. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com
Likes
55
Share
Day 21 Veg: All going good so far with the ladies. At their 5th nodes now and beginning to fill the pots out nicely too now. I have started giving them Megacrop at 1/4 strength now. nonsigns of burn or any issues Siz shooter is the smaller of the group and I have removed her 1st nodes to get her to ficus on the higher ones I won't stress her out now as she could be held back if not careful. Strawberry pie developing well amd i have now tied her main at the 5th node to slow the development and allow the other nodes to equal each other for a canopy. .This will be removed and the node allowed to continue to develop. Mexican airline had the same treatment as the pie with a tied 5th node. Her colour is perfect with no signs of any issues. We will see how the method works by the next update hopefully. fingers crossed. be well