Likes
Comments
Share
Likes
10
Share
@SgtDoofy
Follow
3/14: Came back from a 4 day vacation to a lot of dry, wilted, dead leaves on Amnesia. Trainwreck is super starved as well. My automatic watering system didn't kick on, and the humidifier ran out of water within 24 hours, so there's that. It may be for the better though, as the PH of the nutrients had risen to 7.5. I tossed that mix, and made another 2 gallons of half strength nutes, molasses and epsom salt. I watered them both to runoff, and now I'll wait for Amnesia to prioritize which leaves she thinks are worth saving, and then I'll defoliate the dead ones. Hopefully trainwreck will just bounce back to green. She needed to be defoliated anyway, so this situation makes it easier for me to find the dead leaves. Edit: Came back to feed the last of the nutes and decided to pluck the crispy goners. I found that pulling the leaf stem downward will make the most dead leaves fall right off, allowing me to test a majority of the leaves and give Amnesia a major haircut. Luckily I left a lot of leaves from prior defoliation, as Amnesia REALLY sucked them dry. 3/15: Amnesia looks no worse for wear than last night. Trainwreck as well. Went ahead and pulled as many dead leaves off Trainwreck as I could. Some leaves were a mix of crispy brown and healthy green, which I think is pretty goofy, so I avoided taking any green fans but removed the crispy ones. The colors of the leaves around the buds are really fun to look at. 3/16: Amnesia is starting to SHED her dead leaves, allowing me to pick the leaves with almost no effort. I tested as many leaves as I could, giving another haircut. I would say this isn't a good thing, but since it's my first grow, I'm rolling with it. As long as Amnesia keeps the buds and its nearest leaves alive, it will slowly grow, albeit stunted. I'm not sure if this condition will cause it to finish sooner, but I'm going to need to watch the trichomes under a microscope every couple of days just in case she's ready for harvest. Trainwreck looks about the same as it did before. No new leaves are ready to be removed there yet. 3/19: Amnesia is still shedding leaves, but also bulking up. Trainwreck is slowly bulking up, and turning purple as well! Going to keep an eye on Amnesia's trichomes. Edit: because amnesia is yellowing so much, and because it's been 5 days, I'm going to feed both plants a quarter strength nutrient mix just in case I've been overfeeding them somehow.
Processing
Likes
24
Share
Hey guys :-) Today I start the other 2 Runtz parallel to the Spring Cup diary :-). A few days ago they were germinated and planted :-). All 3 came. 🌱🙏🏻 I wish you much fun with this Diary :-) Let it grow 🌱👌👍 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦💧
Likes
13
Share
@Lazuli
Follow
This plant is so big, anyone wanna help trimming in a few weeks ?
Processing
Likes
19
Share
Did some tie down on the side branches to help with light penetration. When I touch her, she gives off a amazing lemon sweet fuel smell, very intoxicating can't wait to cure it. Hairs are starting turn. She has been loveing a 6.8- 7 ph as well. Had a healthy feed. Added norish-L (humic acid). @ 2 drop/L
Likes
15
Share
Es läuft prächtig. Die Photos sind auf Geländerhöhe, also über 80cm. Der 80 Liter kübel: um die Kronen zu öffnen, hab ich die je 2 Haupttriebe von fat Banana nach außen gebogen und an stöcken fixiert. Die Lemon skunk wurde schon durch LST an den Rand des Kübels gebracht. Larry ist auf gleicher Höhe gewesen und wurde genauso behandelt. Die ak bildet 6 Gleichhohe Haupttriebe und 4 untere Seitentriebe, wird schön buschig.auch hier wird demnächst die Krone geöffnet. Die Photos wachsen so gut, dass ich bald das 3. Und somit letzte Mal toppen kann. Die automatics: Die 3 Apple fritter Auto bilden dicke blüten und haben angefangen, stark zu riechen. Die kleinste (28cm) hat den dicksten mainbud und wirkt insgesamt sehr gedrungen. Wohl, wegen dem schlechten Wetter am Anfang der Vegetationsphase wuchs sie nur langsam. Die zwei anderen sind 59 und 63cm und wurden mit LST gut zum verzweigen gebracht. Die 4 fat banana Auto kommen gut in Schwung, aber haben noch nicht die Blütenmasse, die ich erwarte. Geruch wird langsam stärker. Die tropicana Cookies purple Auto haben alle 3 eine schöne Struktur entwickelt und bei 2 von 3 schon dicke blüten hervorgebracht. Eine scheint ein anderer pheno zu sein, der in diesem Stadium relativ kleine buds zeigt. Mittelstarker Geruch, etwas fruchtiges bemerkt man schon. Wetter ist gerade wechselhaft, soll aber sonniger werden in den nächsten Tagen. Wir werden sehen. Es läuft ziemlich gut 👍 bis nächste Woche ✌️
Likes
96
Share
@DevilsBud
Follow
New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Processing
Likes
29
Share
Processing
Likes
15
Share
@AK1210
Follow
The tricombe production on this strain is ridiculous! It looks amazing under my microscope. The heads are mostly milky coloured so this may be finishing sooner than expected. The space in the tent is getting a bit tight so I'll be glad to have more room when this lady has done her thing.
Likes
13
Share
@MrPott
Follow
Now that I got the environment stable, it's nice to see her bud sites popping up. Did a bit more LST on her and hopefully when Nicky (the photoperiod) is done, I can boost the lights to 18 hours a day.
Likes
45
Share
@BodyByVio
Follow
Beautiful flower full of trichomes. Smell and test fantastic. Very fast flowering. She was done on day 49 but I cut her down few days later. I love the strain, the only thing that I will like this strain to have is a better yield. Beast quality buds I ever grew.
Likes
20
Share
7/16 some plants are showing yellowing in the leaves and one the plants has branches drooping. theyre flimsy as is. same plant is showing airy buds, almost no bud structure. maybe will pack on weight a little bit? probably not 7/18 could be a nitrogen issue. considering theyre autos, i shouldve dialed it back before flower 7/22 plants are still throwing out pistils
Likes
16
Share
@1juan420
Follow
All pictures taken on day 22 She was struggling a bit on windy days so I added the metal hook to give her more stability Some colder nights do not seem to affect her
Likes
9
Share
Lot's more growth! It appears the stretch has mostly stopped. I put my zkittles on a platform to get it more in line with the canopy. The green crack/alaskan diesel really stretched. I have been pruning dying leaves and removed all of the LST. Letting the plants do their thing now that height has been controlled. It's looking like the zkittles will be my first strain available for harvest. Got my humidity down to around 40% after it drys out from watering. Still have a fan blowing air into the tent, and have been rotating the plants too for more even light/ to limit the risk of bud rot. Probably too many plants in my small space. Also noticed the light has always been at 24/0 as I never switched the timer on. Oh well!
Processing
Likes
72
Share
@DreamIT
Follow
🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 👤 26.1 ... 👤 27.1 We enter the heart of the vegetative phase. the seed has not yet wanted to detach but it is also fine hanging there where it is: p 👤 28.1 ... 👤 29.1 ... 👤 30.1 ... 👤 31.1 ... 👤 1.2 It is a few weeks old but already proves resistant. The lamp works beautifully, I see the results day after day with plants already in bloom. Compared to the previous lamp always make it bloom even faster in terms of time. Can't wait to try the XS series ____________________________________________________ 👀Are you looking for a good lamp to start?👀 Viparspectra in my opinion has something more than the others, take a look at their site. ➡️ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩Use " GDVIP " for an extra discount💯 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 70% Indica / 30% Sativa 🎄 Genetics ▪️ Sirius Black 🚜Harvest ▪️ 450 g / m² 🌷Flowering ▪️ 63 - 70 days ✨THC ▪️ 25.0% ✅CBD ▪️ 0.5% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 ____________________________________________________________________________________ 👀📷 Follow the best photos on instagram 📷👀 https://www.instagram.com/dreamit420/ 🔻Leave a comment with your opinions if you pass by here🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
22
Share
@Trip614
Follow
definitely should have switched to flower a couple weeks earlier, only my 2nd time doing a scrog, the last one worked awesome, this one is way more full since I only did one strain instead of 4, but now it's too full, I have some real nice looking branches and tops going UNDER the canopy, week 4 I do a final defoliation, I will have to see if I can get these all up and in the net or remove some smaller ones to make space for the bigger branches
Likes
32
Share
She is still hungry for extra calcium, so trying to keep that at bay. And she is starting to show pistils 6/18 didn't make it in tent today 6/19 Added 1L am and 3/4L pm Added 3ml cal mag 6/20 added water ph 6/21 added water ph 6/22 added water, added 3ml cal mag 6/23 added water, added 2ml cal mag 6/24 Added water 1.5L Bloom(1/2 Strength) Micro 0.75/L x 11.3=8.5ml Gro 1.0/L x 11.3=11.3ml Bloom 0.75/L x 11.3=8.5ml Cal mag 1/L x11.3= 11.3ml Bud candy 1/L × 11.3= 11.3ml Hydroguard 1/gal x3.5 = 7ml 3 gal = 11.3L Lst Light intensity up 10% to 90% Turned oscillating fan up and made it stay on Record kept here https://1drv.ms/x/s!AmTQ-7u9iyH6kFWgDNVqoDB1_CY1
Likes
9
Share
È stata una settimana bellissima! Il caldo estivo italiano finalmente è arrivato con temperature alte di giorno e fresco di notte. Queste varietà sono perfette! Ogni banca dei semi di queste varietà merita il mio applauso di cuore! Alcune sono più alte di me cioè superano il metro ed ottanta centimetri di altezza! Molto diramate tutte si stanno riempiendo di infiorescenze dure, appiccicose e molto resinose con odori intensi e fruttati! Ogni varietà sta sviluppando il suo aroma in maniera impeccabile! Gli insetti e parassiti ormai non sono più un problema, la resina appiccicosa non è gradita dagli insetti! Sono cresciute molto ed in circa tre mesi verranno raccolte, adesso si riempiono fino a che possono, le infiorescenze si stanno gonfiando ed iniziano a prendere forma. Abbiamo iniziato con un po' di Atami bloombastic assieme al top max e biobloom e se continuano così tra circa 4 settimane raccoglierò alberi XXL di altissima qualità biologica con aromi speciali! Odore nauseante in giardino! Un abbraccio a tutti e complimenti ai creatori di queste varietà!
Likes
1
Share
@Dabcik
Follow
Aumentato distanza lampada e ph dell’acqua di irrigazione. Le piante stanno bene hanno un bello stretch che sto cercando di tenere sotto la rete. Ora i fiori iniziano a formarsi