NICE BLACK-OUT FADE TIPS BURN HERE & THERE CUD AVE TAKEN HER XTRA MORE WK BUT THE OUTDOOR WEATHER WAS TOO RISKY!!

Week 4 Flower Bud Set Watered in at 900ml Individual Recharge day and Silica day. Top dressed 2tbs Bloom2 Barley 2tbs

She's looking super healthy and and strong can't wait to see this beautiful strain in full flowering stage, I'm feeling a very good stretch,shed definitely a big girl,she's eating very well, no deficientes or nutrients burn so far. Let's see how this wonderful organic lady performs. On August 9th I start to see the change from vegetative stage to flowering stage,she looks super healthy and strong,I missed some watering a few days ago,however she is perfectly fine and happy,she's a dream to grow.

Very easy strain to grow. I grew the White Critical Express previous to this grow, I really liked it and wanted to try growing an Autoflower so I went for the Critical 2.0 and it was worth the grow.

[DAY 64] - 3/8/2022 - Lamp 40 cm from the center of the canopy (20 cm from the top) and 100% dimmer (144 watt); - TEMP. 30°/31° - RH 40-50%; - EC 1.7 - PH 6; started with EC 1.7 and after 24 hours EC is 1.95; - 73 cm height; - LST on 4 branches to open the canopy; - Removed some damaged leaves; - Added new PH down: CANNA PH DOWN BLOOM (instead PH DOWN by GHE). I prefer GHE, it seemed more effective; - Let's see what happen this week, I want to see big flower by the end of this week; next one I'll add Bloombastic again; - A lot of leaves with yellowed tips, I hope it is not suffering excessively the temperatures. [DAY 65] - 4/8/2022 - Lamp 40 cm from the center of the canopy (20 cm from the top) and 100% dimmer (144 watt); - TEMP. 30°/31° - RH 50%; - EC 2 - PH 6; tomorrow I add lighter solution to keep EC to 1.7; - In the last couple days I noticed plant drank less than usual, the half. I guess it was very stressed due defoliation, but seems to be recovering well. - Today I did bit defoliation and in the coming days I let the plant rests, then we'll see if another defoliation is still needed. I don't want to exaggerate. [DAY 66] - 5/8/2022 - Lamp 40 cm from the center of the canopy (20 cm from the top) and 100% dimmer (144 watt); - TEMP. 31°/32° - RH 60%; - EC 1.7- PH 6; tomorrow I add lighter solution to keep EC to 1.6; - Did a growquestion about some brown spots on some leaves: https://growdiaries.com/grow-questions/49286-brown-spots-on-some-leaves. [DAY 67] - 6/8/2022 - Lamp as yesterday; - TEMP. 31°/32° - RH 60%; - Plant is having problems. It is drinking little and I believe it drinks very few nutrients. For this reason I did a DWC change and added a lighter solution (EC 1). Despite this, the EC is continuing to rise. I hope it recovers soon! If tomorrow it continues to rise, I try to further dilute the solution. - Added a new better quality video. [DAY 68] - 7/8/2022 - Lamp as usual; - Temp. 31°/32° - RH 60%; - EC still rising, that's the reason why I added 2 l. demineralized water to bring EC to 1.1; - Solution in DWC at the moment has this composition: Silicate 0.25 g/l - Calmag: 0.25 ml/l - A: 0.8 ml/l - B: 1.6 ml/l up to EC 0.94 - Bloom stim. 0.5 ml/l and Bloombastic up to EC 1.05. [DAY 69] - 8/8/2022 - Lamp as usual; - Temp. 32° - RH 50%; - EC 1.2, almost blocked all day long. Added 2 l. dem. water to lower EC a little bit; - I guess plant is drinking about 2 l. of solution / day, good! [DAY 70] - 9/8/2022 - Lamp as usual, I'm planning to lower it near the tallest bud (from 20 cm to 15 cm) to reach better the lower bud sites - Temp. 30° - RH 50%; - Last day of this week, some problems last days.

09/12/2018 Purple tip cutting seems to be taking .#1 is filling out well lots of fresh flowers stacking up nicely.#2,#3,#4 all doing well👍hope they finish up in 4weeks🙏 No feeding this week just molasses for soil microbes, 09/17/2019 Did some defoiliating and green tie 's to spread out lower branches on #1 . she is a beast. Seeing, some differences between #2,#3,#4 .#4 being darker green, #3 is paler green #2 not as pale, #1 lighter green but not pale at all. Given deep soaking today, and I noticed phase 3 flowering is starting!🙏 should start stacking them fat buds for next couple of weeks hope she done at 10 weeks fingers crossed.

We are actually around week 20........ Canuck Seeds seems to have sensored the review i left about the seeds not autoflowerings, as did TrueNorthSeed

So around April 20th I decided to go all in and purchased the following: grow tent, Vivosun 600W led light, Vivosun air filtration kit, a timer, thermometer/ hygrometer combo, 2 fans and the General Hydroponics flora grow trio. This is just from stuff that I've seen on YouTube, mainly on the "from seed to stoned" channel. Dude seems to be doing a decent job and I initially gathered info from him. At first just the light came so I installed that, put one of those reflective sunshades for your windshield as a light reflector and used my humidifier. That was that. Can't remember the dosage of nutrients per plant really, but it was probably around 1 ml of micro and 1 ml of grow per gallon. Didn't feed em that amount of water, just a bit. Decided that Gaia was to be moved in a 5 gallon bucket, just to see how it would perform being moved straight into its final pot. I did some research and bought Fox Farms Happy Frog soil so that was that. The other seedlings were moved into solo cups with the same soil. At this point I got excited about the prospect of my first grow. I was never really interested in growing but sometimes if I put something in my mind then I'll dedicate myself as much as possible.

The girls look really nice, growing strong and fast, except 1, I’m growing 2 Alakazam from Seedmakers and 2 Tangerine Dream from Barney’s. T There’s one Alakazam that has presented problems since germination. Some of the leaves have yellow-brown dots, most of her root system is healthy, but it has some brown areas, it seems kinda weak overall, it’s the one that has grown more but the one showing problems. The other Alakazam and the 2 Tangerine Dream are looking really nice. Have been doing 50% nute strength feeding, adjusting ph level daily and showing them a lot of love. Should I do something different with the Alakazam or is it just a weak seed? Thanks!

Erste mal mit Dünger gegossen ,ca 0.5l pro Pflanze.

Die Blüten werden schön schwer und bunt. Das Wetter stellt sie auf die Probe und fordert Opfer.

A planta se esgostou os nutrientes do solo e foi aplicada apos a 5 semana floração fertlizante bioo grow BiooBizz e Top Candý da top Crop a planta esta exalando um cheiro muito doce, veremos...💫💨💨💨

A couple amber tricks, buds are getting heavy and falling over 😯 starting my flush with flawless finish tomorrow and gonna harvest at the end of next week 😁 Had a friend do a pre harvest smoke test from a bud I cut off for him last week, he smoked it last night and said it is fire 🔥

Finally got some purples peaking through! 🤩🌱👍🏼

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

This week went real great , one has been getting flushed and the rest we will start flush Tomorrow! These ladies are doin so amazing! Hope you all enjoy !! Stay tuned for next week! Cheers an happy holidays!

All good so far 🙏 buds fatning up a bit and starting to smell also, it's my first time using big bud, and am really hoping to see base ball bat's out of these baby's 🦄🦇⚾😂

Realmente solo han pasado 3 días desde la última entrada, pero como se hará el cambio a 12/12 en este fin de semana, quería subir un video antes de que entrasen a floración 😁 por ahora se han comportado bien a pesar del problema de la distancia del foco... a ver que demuestran en floración 🌱🌱

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍