Very strongly cut off, I prepare to the beginning of flowering, he released a call that for some reason had a pair of leaves, because of which it turned out to be a little more torn off than it cost, I will give her a couple of days and we will begin the translation into flowering, also revealed a call which has 3 points of growth on each floor. Changed lighting: 37 watts white 55 watts blue, 38.5 watts red, Today I fully watched the side lighting and the electrics, controlled from a smartphone similar to the top lamp

Starting to flower quite vigorously, The pro-silicate is definitely helping push and hold up much of the huge canopy, aswell as the Medi one ☝️ an amazing product!! All around can’t complain with this one.

Nothing too special at this point, just watering and the occasional big bloom. I think Im about ready to harvest and move to the next grow. The leaves are a bit thin.

All these beautiful girls are going thre flush now getting ready to harvest up they are all very resiny an covered in trichromes all the nugs are nice an dense an are smelling amazing can't wait to be able to dry an start curing them

The plants are all doing well, unfortunately they are developed differently, in the future I will make a report per plant

Diary Update: Week 3 – Substrate Management & Climate Tuning Starting tomorrow, I am bumping the light intensity up significantly, targeting a DLI of 38.88 to push vegetative growth to the max. To support this high light energy, I am using the Plagron Terra mineral line (Terra Grow, Power Roots, Pure Zym, and Sugar Royal). Because my substrate EC is currently under 0.2, raising the nutrient levels is urgent; otherwise, the plants won't be able to keep up with this high DLI. I will gradually increase the Terra Grow and additives this week to hit that target substrate EC of 1.0. I'll closely monitor the two slower-growing plants to ensure they don't get stressed by the intense light while their root systems catch up. Day 18 - In the previous days i had the soil probe on the top of the pot to see how the water levels/ec would do. But it seems that the ladies are quite demanding and i will up the EC to 1.5 at this stage. Today i shall move the soil probe to a horizontal positon halfway in the pot and give each pot about a liter of water (see when the soil probe goes up to around 30%)

Not even sure if they’re actually in week 10 haven’t really been taking too many pictures. Really loving the gorilla cookies and how big they are vs the apricot auto in the closer left corner. All other 3 are gorilla cookies autos. Just started feeding just distilled water for now and flush them to get for hatbest

Once again these girls don’t really need much just watering when dry but other than that we are on cruise mode. I have been checking trichomes for about a week now and man is she almost there I should be giving them lights out with in another week or two can’t wait

We've reached the end of a really long but very satisfying journey! These girls have their heads covered in snow...even though it's very hot 😥 uffff😓

Very happy with how both plants turned out in the end! Pheno#1 is a definite keeper, but il be hanging on to Pheno#2 for at least another run or two. Both plants have a very similar smell it’s like a tropical cherry punch, #1 smells the strongest, you only have to nudge it and then whole room stinks. #2 has a gassy edge that #1 doesn’t have. Both smell incredible! I’ve cut both plants into individual branches and I’ve hung them in my drying tent. I’ve removed all fan leaves and any lead with a visible stalk. I’ll dry them for 10-14 days, my RH stays roughly between 55-60 and the temperature fluctuates between 19-24*c weather dependent. I’d like to thank everyone who has had a look, liked or commented on this diary, I hope it’s been helpful 🙃 Big shoutout to In-House Genetics for another 🔥 strain, can’t wait to try this one! Il post an update with some bud pictures once she’s dried and curing. Catch you all soon, until next time 🌱💚

Amazing!! Ya buddie!

03.04.24 Startet soaking them in Water, all of them fell to the bottom.💧 Transplanting them later on the day into cups.🥤 05.04.24 Transplanted them into their cups, now waiting till the 4 girls show up. 🌱 07.04.24 Banana and GG #4 showed up first and pretty much at the same time. The other are still underground.🌱🍌☀️ 09.04.2024 Sunset paradise showed up, now just waiting for the Runtz.. 🌱 10.04.2024 They all doing well, besides the runtz. Still no sign, but it surely comes🌱 11.04.2024 Everyone doing well, just runtz doesn’t want to show up… slowly I believe it’s never coming but we will wait a few days🙏🏻 14.04.2024 Oke guys I think the runtz is dead.. im a little bit sad bc i wanted to test this strain.. but it happens🙂 Addet some new soil for the bigger 2, because the head was too heavy.. hope this doesn’t cause more problems..🙏🏻 But let’s see how the other 3 are going. I think tomorrow I start a new veggie week here. 🌱✌️

She is a little burned so I had to dim down the light intensity. I am almost defoliating everyday but still some bud sides are shadowed. Just following the Greenhouse Feeding Schedule and giving BioEnhancer every 2 weeks.

2nd week of Flush, then 4 days of darkness. All these shots and video is from the day before harvest and the resulting drying days. 🙌🏽💚🇬🇧

Very happy I went Original Sensible Seeds beens this grow. 🤩 All 3 autos from some special american line, and o boy , they don't disappoint.🔥 Bangers genetics 👏🏻 all trees are huge with 100s of well structured and close to each other bud sites. All very frosty for this stage already. The smell is quite stable on most , sweet creem and lemon pine. I like it a lot 💚

This weeks focus is balancing ph of my homemade Texas Tea nutrient and creating the perfect “Tropical” environment for my babies to thrive in. Incorporated Advanced nutrients up/down to assist with ph also helped lower the PPM. They are loving the vegetation box I built!

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

16" wide by 9" high, leaves doubled from week 4. Vigorous growth using bloom 0.50ml / 1L, keeping soil (pro-mix HP) moist daily