Likes
Comments
Share
Likes
11
Share
Man! I am definitely hooked on my new hobby. Harvested 96 grams of smokable bud and 93 grams of bud/leaves that I will be using to make dry ice hash. Took a third of that second weight (31 grams) to account for pure bud (which is more on the low end) and added to my 96 grams of good flower to get the 127 grams total. Made plenty of mistakes that I’m sure dropped my yield, the biggest being the lighting situation. Plants grew right into my light and even got bleached. The height of the plants made the outer colas grow past the high light areas, which made the buds very airy. But overall it was an amazing experience. I learned a lot of things, some that I have already incorporated on my second grow. And even with my drop in yield, I still ended up with more than enough flower to last me to my next harvest, so this was a great grow for me. Thanks to everyone who followed, liked, and commented. Your words were helpful and meaningful.
Likes
101
Share
@Ferenc
Follow
Day 65, 17th of November 2020: Welcome back at the beggining of the 3rd week of flowering. They seem to be stopped streching and now concentrating on buds. All of them are gorgeous..... The 2 Zamnesia genetics Gelato and Kalini Asia are pretty and buds are forming nicely. Kalini Asia might strech a bit more but not long. The Sweet Seed ones are really nice and I am so happy because Red Hot Cookies is already getting red.... pistils and around the leaves.. I hope the same happens to the Red Mandarine and Tropicanna Poison also. They are so gorgeous. They calmed down I don't expect more strech. Fertilization still the same every 2nd day with the ratio and mix above. Some lollipopping (Defoliation) is also done. I removed all the LST the plant remains in the same shape from now. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.
Likes
27
Share
We made it to curing! I chopped her about 1.5 weeks ago, she dried well, and has been curing for a few days now. She could have went a few more days, but due to a PM outbreak in another tent, I wanted to get the whole grow room bleached for the next round, and wasn't taking any chances. We had a little bit of amber on non-leaf flower trichomes, so good enough! This plant was a beast. The second best producer out of the a lineup of 9 this round. That would likely be the Kush genetics in her, and to top it off, she smells wonderful. Sweet and floral. We haven't sampled any yet, and infact, I had to quit smoking, so we'll see what my father has to say in a couple weeks when done curing. After drying and partway through curing, we have approximately 19g of flower. We did a quick and rough trim with a machine trimmer, as we had 9 plants to take care of all at the same time, and didn't want them exposed to dry too long. I give this plant the highest rating out of any indoor plant I've grown over the 2 years I've done indoor, from a growing aspect. I'll post the smoke report when it is done cured, but for now, 10/10 -- would recommend!
Likes
142
Share
Hi people 🤗 A lot has happened this week 😄 The 3 Blue Cheese and 2 Kosher Tangie Kush which have been in the flowering tent for 1 week have become very bushy 👍 Unfortunately I just noticed that I completely forgot to take pictures of the Blue Cheese Phenotype # 3 🤦‍♂️🏻 The picture will be given later. The rest of the Vegi tent is also progressing very well. They are repotted in 11 liter pots this week, and then come to the flowering chamber die the following week The next week there will be new pictures, until then I wish everyone a nice start into the new week 🙏🏻💪🏻 Let it grow 🍀🌱
Likes
10
Share
A few of the zed blacks hermed..spreading pollen into the flower tent. Already seeing some seeds develop. It is what it is. I should have done a better job checking on them. I kept the Zed blacks that only had a couple flowers on the bottom but tossed anything that had flowers growing up the majority of the plant. Some of the most famous strains in the world were self pollinated so I don't have issues with a couple male flowers. They're just trying to improve their fitness as nature intended. The plants are doing very well. A few of the bottom leaves are dying which is normal...senecense! Sucking up those nutrients. I've been liquid feeding using the fish, seaweed, humate and recharge. I have saved the males and they are trying to reveg. Still popping out a few flowers which I'm cutting off. 1 rainbow belt. 1 zed black. 3 hash plants The hash plants are smelling incredible. Definitely a few keepers mixed in here. Maybe 3/7. Hopefully the quality of the flower backs it up. Zed blacks have 2/3 I'm interested in. One is very very low yield. Unless its a really high quality plant I'm gonna toss it Rainbow belts are both smelling ridiculous. Super frosty. Good yield. One is slightly more frosted than the other. The zkittles pheno has pure Skittles smell with a little lemon cleaner chem to back it up. Probably my keeper!
Likes
16
Share
Eccoci qui... Settimana prossima si tagliaaaaa!!!! Finalemente siamo arrivati alla fine con questa piccola mi sono divertito è stato bellissimo coltivarla outdoor, è venuta bassa ma molto molto compatta!!! Grazie a tutti per il supporto
Likes
8
Share
@CalGonJim
Follow
4/20 AM all the photos are looking good. The Tyson’s are done. 👍👍👍🍇⛽️ 4/21 4:30AM Took small samples of BTT!!! Smoking now. Heavy hitter right off the tree. she is looking already done Grimm Seeds finish fast once flowering. Wasnt expecting that! I will grow some more and veg longer. I am RE-vegging. Ricky and Bubbles they are almost a year old and I want to keep thiem. Julian can go fu...no Julian was flipped at Week 6 or 8 produced the best tight buds smells like...'tangerines. 4/21 5:04AM VIDEOS 2 MONTEL'S, THE TALL ONE AND 1 TYSON, PUNCH PIE & GELATO 44!!!!
Likes
22
Share
HELLO LADS WELCOME BACK TO MRS PEAKY'S GARDENS THESE BEAUTIFUL GEMSTONE CONTINUE TO GET FAT LIKE FAT COWS EVERYTHING SEEMS TO BE GOING RIGHT...
Processing
Likes
7
Share
@gablmo
Follow
Another week with a lot of studing in order to understand what's going on, to then take the proper action. It hasn't been easy, most of the time I have no clue of what the plants are doing. I tried some fimming last week to help even the canopy but it didn't seem to work. Two of them are smaller than the others, I took the smaller one out of the center of the light to give the chance to the others to get more light since it wasn't growing at all due light burn, and one of them was too far from the light, so now is very stretchy. They have been growing fast, any suggestions on how to train them? I think is time to get a new light. I'm thinking about getting a HPS 600 watts, what do you think?
Likes
8
Share
@evAq22
Follow
The plant is doing really fine, I'm going to top it this week 03.04. Da plant needs to grow. At least one more node 05.04 Got toped, now training for 4 mains Edit: 3mains the right branch died
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
5
Share
@420keef
Follow
Had to pull this one out of the tent because i had to make room for the bigger outdoor plants🤷‍♂️🏻
Likes
57
Share
behold the epic conclusion of my Medusa F1 odyssey! Week 11 brings us face to face with an absolute masterpiece – our mighty Medusa in all her glory. She has blossomed into a cannabis goddess, and I can't help but feel a mix of pride and hilarity. So, picture this: with scissors in hand and a grin on my face, I bravely took the plunge and performed the cosmic haircut of the century. I snipped the entire girl, leaving her looking like a botanical version of a cool, upside-down pineapple cake! It was a sight to behold, and I couldn't help but laugh at the quirky transformation. With our Medusa delicately suspended upside down, she's now getting ready for her final act of drying. It's like she's doing an acrobatic performance, waving her buds at us from above. Who knew cannabis cultivation could be so entertaining! In all seriousness, though, our Medusa's buds are absolutely mesmerizing. They've reached their peak density and glisten with an abundance of trichomes. The colors are a true botanical wonder, like a vibrant firework display against a night sky. Speaking of trichomes, I continue my daily trichome investigation with the precision of a detective. Each day, I observe those tiny resinous diamonds, searching for the magical moment when they're just right – cloudy with a hint of amber. And the aroma, oh the aroma! Terpenes fill the air with an intoxicating fragrance that makes my nose dance with joy. If only we could bottle this cosmic perfume! Before I conclude, I must extend my heartfelt gratitude once again to Royal Queen Seeds. Their Medusa F1 genetics have granted us this cannabis goddess, and I can't thank them enough for this delightful journey. As we prepare for the final chapter, drying and curing our Medusa to perfection, I invite you all to join me in celebrating the whimsy and wonder of cannabis cultivation. Let's cherish this upside-down adventure, savor the captivating colors, and delight in the celestial magic of our Medusa F1. As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - RQS MEDUSA F1 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND 
 
All info and full product details can be find in can find @ https://www.royalqueenseeds.com 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ With true love comes happiness <3<3<3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3<3<3 <3 <3 <3 Growers love to you all <3 <3 <3 Medusa F1 Medusa is a true F1 hybrid created from pure, inbred cannabis lines. She boasts uniform grow traits, mouthwatering aromas and flavours, and plenty of potency. If you're looking to bring stable, elongated plants into your room, tent, or garden, look no further. Mouthwatering Aromas, High Potency, and Mid-Size Plants Though she won't turn you to stone like the mythical goddess after which she's named, Medusa F1 is bound to get you plenty stoned in her own special way. Combining genetics from inbred lines deriving from Sugar Magnolia, a thick and sweet indica, and American Beauty, a fast, fruity hybrid loved for its well-balanced, positive high, the result is an autoflowering F1 variety that produces fresh flavours, a unique cannabinoid profile, and large yields. A very aromatic cultivar with a vibrant concentration of terpenes bearing notes of fresh mint alongside an upfront peppery kick, backed up by hints of fresh fruit, berries, and tangy fuel. Her thick, frosty flowers consistently produce high levels of THC and CBG, as well as high concentrations of myrcene, ocimene, farnesene, and caryophyllene. As a result, Medusa F1 has strong effects that relax and stone the body from head to toe (brought on by particularly high concentrations of myrcene and farnesene) while motivating the mind with an uplifting, creative, and motivating kick (thanks to high concentrations of ocimene). Medusa F1 seeds produce elongated autoflowering plants with long, strong branches and well-spaced internodes. Plants regularly grow up to 80–85cm tall and boast a fast flowering time of just 42–45 days (72 days from germination to harvest). Thanks to her genetics, Medusa F1 produces plenty of thick flowers with big, swollen calyxes that make for very easy trimming. Medusa F1 is very stable, handling stress and unfavourable growing conditions with ease, though she is somewhat susceptible to Botrytis, so make sure to keep tabs on the humidity in your grow room/garden
Likes
6
Share
Was an easy week. More to come as i only huge it a few hours ago . Updates incoming.
Likes
7
Share
Likes
2
Share
Day 80 tips have a bit of burn. going straight water next feeding.
Likes
4
Share
They’re starting to drink a little more. No real issues, business as usual day 42
Likes
47
Share
Hey everyone :-). This will only be a short initial update 👍. Today the seed was placed between two fruit cloths and placed in a dark place. I suspect the seed will be ready to be planted in the next 3-5 days :-). The diary starts next week with the planting of the seed :-). I'm really looking forward to the start and until then I wish you all the best 👍. This strain was made by a well-known rap artist from Germany (Herzog) Bred together with Exotic Seed :-). (A dream that has come true for him 🙏🏻👍). Many thanks to the whole Exotic Seed team for the cooperation 🙏🏻 Stay healthy and let it grow 🍀🙏🏻 You can buy this Strain at : https://www.exoticseed.eu/ Type: Herz Og ☝️🏼 Genetics: Larry OG X Kosher Kush Indica 60 % / Sativa 40 % 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
57
Share
@Zengrower
Follow
Still some issues with black flies as they keep coming back despite of the nematodes. I'll treat the soil with nematodes again this week. It doesn't look like it is affecting the plants anymore but I don't want them ending up in my stash 😉. The plants are looking very strong and healthy, growing even faster than last week. Still not sure at this point if I want to do LST or just let them grow. According to the strain info this ladies can grow up to 135cm inside so it's probably a good idea to do LST at some point. I'm also cutting back on the Alga Grow this week to prevent excess nitrogen in the blooming stage.