Get some nasty Colours now The End is near 💪🏼 want to get a bit more brown Trichomes at the End

Hace una semana pasamos a flora, hace mucho frio asiq incorporamos una lampara de ceramica para reptiles, que solo da calor. Apliqué tricodermas foliar esta semana para prevenir hongos. Les puse unos clips lst a algunas ramas que se venian estirando bastante mas que otras asi no tengo tanta diferencia de altura entre ellas

Ok week 8 is here on a water cycle so next feed I guess I’ll switch the lsd have caught up to same height and I keep bending laughing budda in there netting which is full everything going well except I keep sucking up plant beaches when a vacuum opps all good they seem to like the cleaning I think hahahahaha careless must pay attention mire but hard not much room left to get around not to much else to say this week

June 1: May was a cool month and she has been slow to recover since the topping five days ago. This week should be better and the week after is perfect cannabis weather. Did foliar spray of Extreme Blend this morning. June 2: watered with molasses. June 3: rained all day. June 6: starting manual LST to gently keep the two stems from growing close together. June 7: brought back inside because it will be too cold for the next two days. Daytime high of only 8 C and the overnight low will be 1 C. That’s pretty cold for early June.

Primeiro mês de floração, ótimas plantas, super saudável, fertilização ok, folhas com. Um verde bonito, rega e alimentação todos os dias. Plantas satisfeitas.

First week of Zoap x Cheetah Piss :)

I'm happy for a first time, I obviously made a lot of mistakes but above all I learned a lot 👌😎

Hey Growmies! I'm thrilled to share my latest project: two exceptional grow environments, each a lush green haven with 9 plants on plant rollers. We’re employing a blend of Scrog (Screen of Green) and Sog (Sea of Green) techniques. Each plant has its individual ScroG, directly connected to its air-pot, facilitating easy mobility and care within the tent. As the Room is on the cooler side at the moment, I've set up a Solea infrared heater, controlled by an Inkbird ITC-308 temperature controller, to maintain a cozy climate. Each tent is also equipped with a Spider Farmer Cool Mist humidifier for perfect humidity levels. Initially, I planned for identical setups in both tents, but adaptation is crucial. I encountered a challenge with the UR45 lights due to their single plug and UV/IR switches. To overcome this, in Tent 1, I’ve installed two UR45 lights: one dedicated to IR and the other to UV, each managed by a Meross smart plug. The Mars Hydro app manages the light and in-line fan controls in Tent 2, though it has its limitations. The ITC-308 takes care of the infrared heater, while the humidifier regulates itself. I'm really into this setup, but I'm already thinking about upgrading to a single grow controller for all devices. Excitingly, ‘Epic Buzz’ in Tent 1 is competing in the Tent-X Ultimate Grow Challenge sponsored by Trolmaster, who has also sponsored a Tent X Controller for this tent. This addition will greatly enhance our control and monitoring capabilities in this tent. This grow season is extra thrilling as I’m collaborating with Anesia Seeds and Ganja Farmer Seeds. They've provided some amazing strains. Tent #1 houses ‘Epic Buzz’, ‘Red Banana Pudding’, and ‘Pink Matcha Slush’ from Anesia Seeds. Tent #2 features ‘Caramel’, ‘GMO’, and ‘Bruce Banner x White Russian’ from Ganja Farmer Seeds. I’ll be documenting their growth in individual diaries. Check out these links for each strain's story: 1. Anesia Seeds - Epic Buzz [Grow Diary](https://growdiaries.com/diaries/189991-anesia-seeds-epic-buzz-grow-journal-by-salokin) 2. Anesia Seeds - Red Banana Pudding [Grow Diary](https://growdiaries.com/diaries/189995-anesia-seeds-red-banana-pudding-grow-journal-by-salokin) 3. Anesia Seeds - Pink Matcha Slush [Grow Diary](https://growdiaries.com/diaries/189993-anesia-seeds-pink-matcha-slush-grow-journal-by-salokin) 4. Ganja Farmer Seeds - Caramel [Grow Diary](https://growdiaries.com/diaries/190093-ganja-farmer-seeds-caramel-grow-journal-by-salokin) 5. Ganja Farmer Seeds - GMO [Grow Diary](https://growdiaries.com/diaries/190089-ganja-farmer-seeds-gmo-grow-journal-by-salokin) 6. Ganja Farmer Seeds - Bruce Banner x White Russian [Grow Diary](https://growdiaries.com/diaries/190091-ganja-farmer-seeds-bruce-banner-x-white-russian-grow-journal-by-salokin) For those curious or seeking inspiration, here’s the detailed equipment list for each tent: Equipment List for Tent 1: - Mars Hydro 120x120x200cm Grow Tent Dark Room - Mars Hydro Smart FC 4800 Samsung LED Grow Light – 480W - 2 x Mars Hydro UR45 IR & UV LED Grow Lights - Mars Hydro iFresh 6-Inch Smart Inline Duct Fan - Spider Farmer 6L Cool Mist Humidifier - Solea Infrared Heater 500W - Inkbird ITC-308 Digital Temp-Controller - 3 x Meross Smart Plugs (for UV/IR light timing) - Tent X Controller (sponsored by Trolmaster) - 9 x 12.5L Airpots - 9 x 30cm Plant Rollers - 9 x 36cm Plant Saucers Equipment List for Tent 2: - Mars Hydro 120x120x200cm Grow Tent Dark Room - Mars Hydro Smart FC 4800 Samsung LED Grow Light – 480W - Mars Hydro iFresh 6-Inch Smart Inline Duct Fan - Spider Farmer 6L Cool Mist Humidifier - Solea Infrared Heater 500W - Inkbird ITC-308 Digital Temp-Controller - 1 x Meross Smart Plug with Consumption Measurement - 9 x 12.5L Airpots - 9 x 30cm Plant Rollers - 9 x 36 cm Plant Saucers Always happy to hear tips or chat about gear with fellow growers! Can't wait to update you all as these tents transform Stay Lifted Salokin

This is the last week!!! She’s coming doing in 2 days

goodday growbrothers and sistren Purple is doing great!😎👍 I was feelin a bit bold this week so i have just topped her!!...(13.06) not the normal routine, i usually do that in an earlier phase (for autos especially) but i was defoliating a bit (she has HUGE indica leaves.. so awesome) and thought , what would happen if i just topped her right now?? so i did.. and i did some very light LST too, so all the flowers get enough light😇 Ladybugs are still cleaning her but now the weather is better aprhids are not at large anymore.. Ladybugs are just there now to have some red in the plants..😆👌 Cant wait till she turns purple..👌 Happy growing for all✊ KISS! growtechnique: KeepItSimple, Stupid!

Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens we immediately got busy repotting our autoflowers before giving them some heavy stress!

Bonjour à tous les padawans et maîtres jedis Jour77 arrosage avec 30 centilitres d'eau ph6.3 Jour80 arrosage avec 40 centilitres d'eau ph6.3 Jour82 arrosage avec 30 centilitres d'eau ph6.3 Jour84 arrosage avec 25 centilitres d'eau ph6.3 J'estime à environ 10 12 jours la récolte. Comment connaître approximativement le moment d'une récolte en vue d'un rinçage ? Ou tout simplement si la plante est rincé de tout excédant d'engrais quand procédé à la récolte ? La meilleure façon de juger de la maturité des plantes est de regarder les glandes de résine, également appelées trichomes. En utilisant un microscope idéalement avec un grossissement de 100x, vous pouvez facilement déterminer l'état des glandes en résine et éviter d'avoir à deviner. Les trichomes passent par 3 étapes différentes: 1. TRANSPARENT Les trichomes transparents ne contiennent que des cannabinoïdes précurseurs qui ne sont pas psychoactifs. La récolte à ce stade ne vous donnera pas un produit très puissant. 2. MILKY Les glandes en résine laiteuse contiennent du THC entièrement mûr. Pour obtenir des têtes aussi puissantes que possible, vous devez vous rapprocher le plus possible des trichomes 100% laiteux. Notez qu'il est impossible d'obtenir 100% de trichomes laiteux, car de nouvelles glandes de résine sont produites en continu. De même, même après la récolte, les trichomes continueront de se développer. 3. AMBRE Les glandes résineuses de couleur ambre indiquent que le THC a été converti en CBN, une forme dégradée de THC. Cela signifie que votre produit a perdu une grande partie de sa puissance. Le CBN n'est souhaitable dans aucune culture, car ses effets sont plus narcotiques qu'une véritable élévation. Personnellement j'aime bien les récoltes autour de 15 à 30% d'ambre mais c'est juste une préférence Que la force soit avec vous 💪

Same old, same old.. despite the hot weather and my messiness, i think we are in a slow but good way.. Added 1ml of bio bloom, same schedule.

Day 4 - training most GP2 GP1 has stiff stems already.....

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Smells like Rubber bands coated in a berry sugar or berry sryup very interesting on the nose! Harvested day 67 ish maybe a couple more hard ot tell outdoor Split the harvest into drying buds and some to made into fresh frozen hash. i can dry weigh the fresh frozen buds and put that weight in the wet section and i will put the to smoke buds in the dry weight section so total between the two will be the whole plant Drying was a big mishap got condensation around day 10 of drying and it caused some mold 🤦‍♂️ right around the time i was going to cure! Found a peroxide soak that ill post butt it seemed to take off all the mold without affecting tricomb heads! Had to re dry for another week afterward i feel like the re dry maybe messed with the terps because it definitely never got the smell back like i thought but who knows slmost 3 weeks into cure coukd get better but doubt it

Week 21 Daylight 12h20 - 7h45/20h05 Unstable weather, alternating heavy rain and wind quasi every days and sunny afternoons. Moderate temperatures around 14°C min / 23°C max. Plants are safe in the veranda; the sun is lower on the horizon now and the angle of the light is now perfect for a good finish. I need to test the humidity level in the room but it seems reasonable. No signs of diseases or moisture. Last weeks were hard with multiple aggressions: plants are like War Veterans with some damage and scars. The flowering process look not affected by this episode and harvest is approaching. Brake Pad Breath: almost ready. Pistils are rusty colored, buds are thick and dense, firm and sticky. Subtle fruity aroma: tonic and stimulating. Most advanced plant: will be the first harvested soon. 2L watering / 2 days flowering booster finish + water flawless finish + water Flash Back #2: ending the flowering cycle and starting maturation. Last plant infested by insects, may be the plant is reacting by accelerating the flowering: buds are not so dense compare with the previous plant. Pretty spicy smell and good resin production. flowering booster finish + water flawless finish + water GMO x Zombie Kush: starting the last flowering stage. Recovering good and was less injured by caterpillar than the others. Pistils are long and the flowers will enlarge soon: need almost 3 or 4 weeks to be ready. Grower master flo + bud XL enzyme + pk 13/14 Royal Moby is tall and late flowering but seems producing lot of flower. With the stress the plant become hermaphroditic, I discovered some bag of males flowers. I hope there is no pollination between the other plants. Grower master flo + bud XL enzyme + pk 13/14

This week went very well! One will be getting cut an hung to dry while the rest finish up with one more week of flush ! These ladies are smelling so lovely I hope you all enjoy! Stay tuned for next week! Cheers 😤💨💨💨💨💨

This was an amazing experience for my first grow. Was super unsure of what I was going to yield, but I think 27 grams is a realistic harvest and Im looking forward to see if I can get bit larger of a yield on the next run. I want to try main-lining, see for better energy distribution and more equal bud growth. Also investment into a proper reflector and possibly enclosed space. Note- I trimmed my plant the night before harvest morning. I removed than fan leaves to start, and then proceeded to trim the plant. I pulled out a lot of the leaves with no frost by hand. The sugar leaves had so much crystal on it I thought I would leave the smaller ones on the bud. I gave it a light trim, and used all the trim to make Isopropyl Alcahol (99%) based extract. Got about 1 gram from the run. I also had a nice little ball of finger charas from the trimming. I harvested it in the morning at about 04:30 am before the light cycle triggered at 7am. She hung and dried for about a week, where I then chopped her into buds. She cured for 2 weeks before i started smoking. Ask anything you want to know! Or if I can be more clear on any areas of the grow! One Love!