Likes
Comments
Share
Likes
38
Share
*******December 23 to 29, 2019 It was a good growing week. She continues to grow and get wider and taller. However, there have been signs to work on with her. The potassium is a concern and her runoff water at the start of the week was way too high. Focus is to get her medium back under control and looking for a runoff of more around 800ppm with a 5.8pH. She appears to be ready to grow based on appearance and her new growth. New leaves were coming out pointy towards the end of the week. Can just flush the coco to get back in line but given she is an auto I am avoiding that step right now. LST is getting started this week and will tie her down by end of week......just want a little more height out of her. Dec 23/19 - Given the high runoff today is just CalMag @ 1.5ml/L in RO water. 475ppm with a 5.6pH. 1.5 litres. Dec 24/19 - Still a little droopy this morning. Wanted to avoid giving her anything today but going to give her just a small amount of base nutes. - Fed Dual Fuel @ 2ml/L........650ppm with 5.8pH.........looking back at this, I should have left her with plain water this feeding. Dec 25/19 - Moving along and getting the medium in better shape. runoff water today was 1,000ppm and pH was 6.1. - Can deal with the pH level but would like to see it just under 6.0. The ppm is coming down. - Fed her 1.5L again today with a ppm of 600 and pH of 5.8. Gave, VeloKelp @ 2ml/L, Piranha and Voodoo @ 2ml/L, Dual Fuel @ 0.5ml/L. Dec 26/19 - Noticed today that the new growth has narrow blades. Potassium issue is first impressions. Also makes sense that she has been showing signs of CalMag deficiency but is not true. - runoff water today was down to 900ppm but the pH is still at 6.1. - since she is getting bigger, she was given her first good bend over the fourth node to start her LST training. Not ready to tie down yet just getting her used to the change to come. She will straighten out again by morning. Dec 27/19 - The bend from LST yesterday gave her a little more vigour in appearance this morning. She appears to have grown upwards more and more leaves are pointing up. - Still too much going on in the medium so only gave her 1L of water with CalMag in it @ 2ml/L at 200ppm with a low 5.4pH. - Also, noticed the green is starting come out more in her......cut back on the ppm going into her. Dec 28/19 - She is looking better today. Her top leaves are widening up from what the new growth looked liked yesterday. - She still has some lower branches where the leaves are not perky but don’t look unhealthy at the same time. - Her height is doing well and will pull her out today and see if she is tall enough to tie down and get the LST started while stem is still pliable and before she really takes off on new growth. - LST done and she has formed a nice structure and side branching is thick but still pliable. - Gave 2L of RO water with 2ml of Green Plant Nutrients Rezin. This does not change the ppm at all. Only 45ppm with 5.4pH going in. - Runoff water was 1400ppm with 6.2pH. (Tested runoff from yesterdays watering) - After feeding runoff was 800ppm with 5.8pH - perfect!! - Folier spray tonight with VeloKelp to calm her down?
Likes
23
Share
Bonjour à tous les padawans et maîtres jedis Pour la germination j'utilise la technique du sopalin Pour faire germer vos graines dans du sopalin, vous aurez besoin : Un Tupperware avec couvercle Du Sopalin, ou autre quel papier de cuisine qui soit épais et qui retienne l’eau Un verre d’eau Si c’est l’hiver, vous placerez le Tupperware près d’une Box ou d’un Modem pour donner un peu de chaleur Étapes de la germination: faire germer vos graines de cannabis dans du sopalin La première chose à faire est de tapisser le fond du Tupperware avec du sopalin, 2-3 feuilles suffiront. Si vous ne mettez qu’une feuille, elle captera peu d’eau et pourra sécher, vous mettrez donc plus de feuilles que pas assez. Une fois les feuilles placées, versez l’eau du verre dessus, mais pas trop, juste de quoi imbiber toute la surface couverte par les feuilles. Vous aurez ainsi l’eau suffisante pour faire germer les graines sans avoir besoin d’essorer la feuille de papier. Une fois les feuilles humidifiées, mettez vos graines par-dessus, et recouvrez le tout avec une autre couche de quelques serviettes. Une fois en place, humidifiez cette nouvelle couche. faire germer vos graines de cannabis dans du sopalin Lorsque vous graines seront placées entre les 2 couvertures de feuilles, fermez le Tupperware hermétiquement pour que l’eau reste bien dedans et que l’ensemble ne sèche pas malgré la chaleur. Si vous êtes en hiver lorsque vous mettrez vos graines à germer, ou que les températures sont inférieures à 20°C, vous placerez le Tupperware sur votre Box ou modem jusqu’à germination, mais toujours en évitant le contact avec la lumière. Si vous êtes dans une zone au climat tempéré ou chaud, vous n’aurez qu’à placer le récipient avec les graines à l’ombre dans une armoire ou une caisse de rangement. Toutes les 24h, vous devrez vérifier l’état d’avancement de la germination. Si quelques-unes sont sorties mais pas d’autres, prenez celles qui ont germé pour les planter, laissez les autres dans le Tupperware et vérifier de nouveau le lendemain.
Likes
32
Share
@Ferenc
Follow
Mini group cute 😍 I like art, bonsai cannabis :) Honestly I had some issues I had to change the soil no choice but all good now they started coming. Cute little bonsai girls. Fetrilization continues the same way on Monday, Wednesday and on Saturday with the mix above :)
Likes
148
Share
@BioBuds
Follow
Well, she keeps disappointing me a bit. If you see her development compared to the two other strains, she is miles behind. Not stretching that much, and flowering stays behind. Im checking for male signs every day as I suspect she might go on me. All conditions are the same. This is a 9 euro seed. 4 of them didn't germinate. 50 bucks down the shitter. The plant right next to her comes from a one dollar seed, xtrakush at weedseeds.site. That's why I plead for the growers to share their lucky shots and give the small-time breeders a break. Also a plea for an expiry date on the products, for the price vs cost of production, we can expect that service. that way renowned breeders also protect their name when third parties sell old seeds to growers that leave bad reviews. Maybe she surprises me yet, but we are long way from the silverback we wanted. Thanks for checking in, see you next week!! Bud
Likes
200
Share
@Ferenc
Follow
Day 51, 31st of October 2020: Hiya!... Time goes fast basically I went on holiday only for 6 days so my friend looked after them.... and miracle happens .... Ladies and Gentlemens ... They impressively grew 20 cm.... look at them explosion ... I had to do LST and gave them darkness one day and switch the lamp to 12/12 from today.... They want to flower .... The smell is getting stronger as well I bought extraction fan system with filter which is already in arrived today but not in use yet..... Everything seems to be good and everything will continue the same way well from next week pump a lot of nutrition they will need it ;) Cheers!
Likes
2
Share
@Lvnsource
Follow
Start of week 3; increased PAR from 250 to 280 for the autos, 300 is still too much for them to handle as they’re clocking out early with that amount lol!
Likes
7
Share
Some mad crazy growth going on here lol. But iv been informed by a fellow grower that's she's going to be a monster of a plant. So we'll see.
Likes
8
Share
@burnout
Follow
Day 42. Top watered 4 liters each box on day 38 with ferment, recharge and buildabloom, filled reservoirs day 41 with 8 liters water and dehydrated coconut powder. Not much more stretch happening, going to be small plants with a small harvest.
Likes
56
Share
@Evi1tek9
Follow
I flushed them on day 48 with straight R/O water No more nutes, hoping to get a good 10-14 day flush Swelling more and more each day, getting more and more frosty each day
Likes
Comments
Share
Likes
2
Share
@semechkin
Follow
growing fast, seems I was skip few weeks in this diary.
Likes
22
Share
some kind of mushrooms growing makes me happy knowing the microbial life down there is flourishing, still no visible slowing down in stacking and frost production.
Likes
8
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
18
Share
09/03: Im pleased with their progress this week. They did indeed start growing nicely after their slow recovery adjusting to the removal of the humidity domes. I have my light at 60% and still about 18 inches away. My humidifier is never getting the humidity pas 59 when i want it to be in the mid 60s. And so i ordered the big AC Infinity humidifier and hoping it will do a better job. I was low of my typical nutrients and so i decided to try something new and bought an Advanced Nutrients stack. Going with the three part and B-52 and will mix in Big Bud, Overdrive, and Bud Candy later in the grow. Excited to see how this works out as i have seen a lot of great grows on here with these nutrients. I am just following their feeding chart recommendations until I dial in what i like. I plan to transplant them to their large 7 gallon auto pots sometime this week. Maybe as soon as tomorrow. 09/05: Transplant day! Today I transplanted them to their final 6.9 gallon pots. They all had great root systems that had not reached a root lock yet. I added some dynomyco to the transplant holes to help with root production. I will continue to water from the top for about a week before turning on the autopot drip system. 09/08: Decided to do an aggressive topping today, this was done at the 2nd to 3rd node, depending on the plant. I have not yet decided how i want to train them, but this will leave me with options while i decide over the next week. I know it looks like i took down half the plant, but trust me, we good. I may actually go with a form of main-lining that ive wanted to do for a couple years now.
Likes
Comments
Share
Combined the cop of water and paper towel method then planted the sprouts in root root cubes
Likes
35
Share
Welp, These took a Bit longer than my Cream Cookies and still didn't fill out quite like I thought they would.. But they are still a very beautiful strain and a joy to have grown. They smell stronger and way more lovely than the cream cookies thou just a beautiful aroma I'd really like to grow these again Indoors where I can control them easier. (Sadly they dried into wispy nothings and we turned them all into bubble hash) #3 took the hit of some aphids and ended up in a frozen hash pile in our fridge along with two cream cookies from the run. It's frozen weight combined was 203g. *will update with dry*
Likes
8
Share
@dauntless
Follow
10/15 Same stuff, just keeping it stable is all I'm trying to do. Update 10/18 - Heat was ridiculous this week, had to turn one or more light features off, for example, turned off the HPS -AND- the LED circuit on the Phlizon on the hottest day because inside the tent it was like 91 degrees F. Yeah it may not be the perfect environment, but look at the growth from the 15th til today. Major flowering happening, unless I am tripping. I see a lot more healthy growth now, which in my opinion means the transplant idea was SO WORTH IT. I see a lot of crystals forming now and the tops the leaves are turning more white that I could hav imagined -- with two more weeks at least to go, I think I may have some bomb flowers if I dont fuck anything up. Northern light to the left in video has more to go and is not as far along as the Vanilla Frosting. 10/20 Added some new nutes for the last two weeks of flower, bubbling like a madman wanting this grow to finish. White Widow (three plants outdoors) will probably finish in the tent, its just really in stasis but it is getting some frosting of its own. BTW when I smelled the flowers yesterday I was blown away by how awesome they smell, like seriously boutique top shelf aromas going on, this is my first grow indoors and really the first time I have been able to give the attention and care these babies need. I have learned SO much. Especially about stuff I was clueless about before. Like which lights are good. What tent size to get. Ph, nutes, watering, relative humidity, cloning... all new stuff. I have become a better gardener as a result and my 200 sq ft community garden plot is doing way better and I expect next year to be bonkers because I really get the whole ecosystem thing now and how mycorrhizae helps everything. This video helped me a ton: https://www.youtube.com/watch?v=ID9rE5JewVg&ab_channel=ApogeeInstrumentsInc. and this one too: https://www.youtube.com/watch?v=jq_wl8XRUK4&ab_channel=GrowersNetwork Also, really check out Phlizon lights (CREE COB) if your tent can handle the heat. I am already planning my next grow, and I am going high CDB autos... solomatic and fast eddy.