Likes
Comments
Share
Plants are getting really top heavy, added bamboo support, I aim to cut in a couple weeks or so.
Likes
28
Share
Final stage of vegetation. Few more weeks left before flowering starts. Cant wait to have that Hazelicous smell around. Anyone ever had dream machine?its one of her parents and I have never smoked it and im very curious about the taste especially!
Likes
22
Share
@Smith420
Follow
I used a bounty paper towel inside of a 6x4 glass storage container cut to match size. Sprayed distilled water generously over, then gently placed seeds evenly apart from each other. Placed a second paper towel and sprayed again with distilled water. Sprayed inside lid and closed for 48 hours prior to opening. Left raised above ground floor on cardboard box directly in front of heat intake duct. Temp and humidity were around 75-80F and 60-70%humidity. after a successful beginning, I then planted each seed using latex gloves into 4 different pots ; 1-5gallon happy frog only, 1- 5gallon pot happy frog with clay pebbles, 1-3 gallon pot happy frog only and 1-3gallon happy frog and clay pebbles. I covered each seed with a cut up 2litre clear soda bottle with small holes poked on the tops. I sprayed down the soil and the plastic containers. I left them covered until I noticed the cotyledon leaves then I removed the plastic covers, increased circulating fan speed and added a bag of exhale co2. Watered daily 2-3 times by misting with spray. (Distilled water in humidifier and used in feeding)
Likes
14
Share
@BLAZED
Follow
Week 11 (10-4 to 16-4) 10-4 Temperature: 24.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 60% (highest) 52% (lowest) No pictures. Added 10L to the reservoir, and turned it on for a couple of minutes. 11-4 Temperature: 24.4 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 52% (lowest) 12-4 Temperature: 25.5 degrees (lights on) 22 degrees (lights off) Humidity: 65% (highest) 57% (lowest) Turned the reservoir on for a couple of minutes. 13-4 Temperature: 26.5 degrees (lights on) 23 degrees (lights off) Humidity: 65% (highest) 56% (lowest) 14-4 Temperature: 26.4 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 45% (lowest) Turned the reservoir on for a couple of minutes. The reservoir is almost empty, there is 850 ml left. 15-4 Temperature: 24.4 degrees (lights on) 20 degrees (lights off) Humidity: 59% (highest) 49% (lowest) No pictures. 16-4 Temperature: 23.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 60% (highest) 53% (lowest) Today i defoliated both plants heavily for the last time, you can say i did a method called: schwazzing. Turned on the reservoir for a couple of minutes. (Till the AutoPots are full and the valve closes) Rised the pots aswell, so the canopy is very even. I let them recover from the heavy defoliation i did, and next week i will slowly increase the light's strength. (Now still at 50% 50cm)
Likes
22
Share
@Naujas
Follow
Well, I came back after vacation, and this is what I found: it jumped up to the light.... I made a little cropping and tried to use more LST, the problem is that it no longer fits :D :D :D but at the same time, it's really interesting to me trip :)also, several rings are already affected by the light, my 50w light currently shines at 100%, maybe it would be better to reduce it to at least 80%?.
Likes
20
Share
@Hoodoo
Follow
Another big photo dump! I've completely cut out the FloraGro now. Flowers are starting to fatten and the lowest buds look very mature already. Excited to see what happens in Late bloom!
Likes
Comments
Share
Wow the growth difference over this short time a week is insane I couldn't believe it the genetics are dead on here and she loves the environment.The plans has allready made me want to start there z skittelz strain in auto flowering version ..cheers
Likes
9
Share
7/18/25 chopped and hung. Will update with more pictures and videos and dry weight in 5-7 days Check out my YouTube channel for more behind the scenes that aren't on here. https://youtube.com/@aestheticgenetix?si=sKoIKf9kAmFlIWQo
Likes
184
Share
Germination date 🌱 12/07/2021 Day 71 24/09/2021 Strain 🍁 SinCity seeds YUZU SORBET (Purple yuzu x whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15% off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 Both Sincity strains have some nice early frost levels ❄️ got a feeling they will be dripping in tricones when done. No complaints so roll on next week. Happy grower 💚 Happy growing fam ❤️🌱🍁👍🏻
Likes
20
Share
Never afraid to show people the truth and bounce back on these autos. I was absent 5 days. You can the coco went bone dry as dick. Within 7 hours the girl back to her healthy glow. Unfazed I'm so keen for this one. So much purple like my c4. Tall as fuck and nugs are slowly filling in her gapes. All the little ones are so happy. I'm one happy grower :) will update with more photos later today. A nice beautiful update on 3/13 holy fuck just realized today friday the 13th haha. Night queen starting to fill in nicely as the weeks go by. About to hit her with another strong feed. ^_^ Another update on 3/16 before the end of the week bud sites are really starting to fill in now 3 more weeks to go ^_^. Strong feeds all week then going be regular water for about 2 weeks. Give it a nice fade :). Thank you to everyone who watched this beautiful plant grow.
Likes
8
Share
Hi growmies! This week winter started around here so the nights are colder, these lil ones aren’t growing much, im moving soon so ill probably start an idoor. I’ll keep you updated next Sunday till the goodsmokes!💨❤️🏻
Likes
2
Share
Buds are stacking nicely. I can't help but wish they were a bit bigger. Not sure if this is due to the root issue earlier in the grow, the new LEDs, or the fact that I FIMed and then LST the plant to have lots of tops. I'm thinking it's probably a combo. Not thinking the ES300s are to blame since they make shit grow so quick and happy. Part of it is also that my #4 and #1 will be pretty light compared to #2 and #3. But ultimately, I think I'm going to be extremely happy with the quality and frostiness of it all... I'm dropping PPMs from low 500s to high 400s throughout the week.
Likes
2
Share
Processing
Likes
Comments
Share
Biological fermentation of guano good! #organic #livingsoi Friendly to nature
Likes
37
Share
@J4kpvp
Follow
Hello:) The wasabi is ready now, trichomes are about 10%amber, the front right sangria is surprisingly also at about that ripeness. The two sangrias in the back look very cloudy, but almost no amber, so i think one more week is the right call. I‘m also having some humidity problems… lets hope there won‘t be mold in the big buds afterwards… there is one bud on the wasabi that already doesn't look super good… that‘s the only thing that could still mess up my grow… Also here is also the video so far:) lets hope the next update is the harvest:)
Likes
6
Share
@DeAKiller
Follow
In Questa nuova settimana, sto avendo dei problemi con tutto il ciclo di irrigazione, e con l ossigenatore. I tubi che portano l’acqua alle piante sembrano essere saturi di residuo della soluzione, ed inoltre l ossigenatore non porta abbastanza aria all interno della vasca e l’acqua risulta essere torbida. Se qualcuno della community può darmi dei consigli ne sarei molto grato
Likes
9
Share
📆 Semana 9: La Auto Pablo Escobar mantiene un ritmo estable en floración. Los cogollos siguen engordando y aumentando en densidad, con una producción de resina que no deja de sorprender. Los tricomas son mayoritariamente lechosos, aunque aún se observan muchos pistilos blancos, señal de que la planta todavía tiene margen para seguir desarrollándose. El aroma se vuelve más complejo y envolvente, con notas dulces y cítricas que se intensifican día a día. ¡Seguimos creciendo fuerte! 💪
Likes
8
Share
Esta semana ha sido una auténtica locura, las plantas no acababan de estar como yo quería, algunos días parecía que querían ir bien, pero al día siguiente volvían a estar mal... decidí eliminar 3 plantas del armario las 2 poddy mouth y 1 blueberry cupcake. No acababa de estar agusto con la configuración de 9 plantas y decidí eliminar las que peor estaban. Instalé la red scrog a la altura de la canopia de la planta más alta para empezar a igualar plantas☘️. ¡Seguimos!📈 🐗🌰