It’s bern roughly two months these guys have been growing! Lst’d Both but untied the gg because I wasn’t sure she was benefiting from it so I’m going to do it over. These ladies (I hope) will start their flower journey next week when I revive my new flower tent 😎..stay tuned for some epic buds..I hope!!

It was my first grow and I really screwed it up a lot, but it resisted all my beginner mistakes, pests, stress, being without irrigation, irrigation without measuring PH, revegetation, etc. I love her, really, in love with this strain. It is a genetics with a very relaxing effect, recommended for those who cannot sleep at night. shoutout for trimix, very good prices for begginers> https://www.trimix-pro.com/

She’s doing the thing! No stress from the trellis and is stretching lots! She already has recovered from cal mag deficiency as she has no signs of it or any deficiency in new growth. New gravity fed watering system installed today, super excited!

she has 103 days and I'm going to leave 120 days to knock her out. she still enjoys the sun and the outdoors and she s feeding every 10 days with red bird guano... 80%ambar

Switching to 12/12 so the girls have the first week of flowering behind them, so far without any major problems, they are out in the world and it is a pleasure to look at them.

Feliz con los resultados 😊

5/31 Week 10 and the state of the grow is winding up I know Baba looks like hell, her buds are in danger of breaking some of the branches so I have everything kind of falling in on itself supported by bamboo. Harvest Sally and Athena yesterday leaving only Jane Baba and Cleo (my wife's) in the tent so turning down the lights a bit they are getting plenty Water only not much to do till harvest 6/3 Just nothing going on, giving them water Baba seems done now little further hair growth or bulking, harvest in a day or so, real busy with other projects so no promises 6/4 Yield from Sally and Athena wet - 650 grams dry - 151 grams about 5 oz, so with Baba still left to harvest looks like we good for an holiday season grow of this strain next winter. Cannot believe how thick the trics are on these two and the one left is even more frosty. Baba harvest tomorrow not sure about the twin 6/5 Harvest day for Baba only Jane remains Baba wet - 533 grams Running totals so far : Wet - 1188 grams Dry - 151 grams (expect to double this) Looks like we almost matched our numbers on the first two plants as expected. Prob a good 10 ounces on the grow not great but a good grow none the less with 8 months of medicine so this strain is on the schedule for November. Harvest report on Jane harvest , may be a few days she still making bud

Devo dire che le due Gorilla RQS sono contente e stanno bene nei loro nuovi vasi da 11 L ed in confronto a settimana scorsa sembrano più sane e in forma, purtroppo sono stato quasi una settimana senza misuratore PH perché mi dava problemi e quindi per una volta non ero effettivamente sicuro quanto era bilanciata la soluzione ma penso di non aver fatto danni…andiamo avanti, ieri ho sciacquato solo con acqua a PH 5.9/6 e ora aspetto che asciuga bene questa volta salgo con EC e arrivo intorno a 1250…vediamo come reagiscono 🧐😶‍🌫️

Just changed waters and plucked some fan leaves.🌊✂️ After plucking the leaves of these girls my hands have an odor of the most lemony citrus scent that I have smelled in strains before. 👃 These mostly sativa hybrids are looking happy and healthy & I can not wait to see the results.😊

Here we go into flower. If what they say is true, we're in for a nice color show.

Day 63 of growth, day 40-43 of flowering Big shoutouts all around🙏🏼🙏🏼🙏🏼💯💯💯💚💚💚 My seed sponsors: @fast_buds and @atlasseed My friends at @seedsman for the amazing hookups from their line of 🔥🔥🔥 autos. Thanks to @aeromixer for allowing me to be an ambassador for them(I hope I'm doing at least half as good a job for them as their pump is for me😁) The girls absolutely love the Bar2400 from @sunraise I'm hopeful that it will keep up in the new 4x4. I also want to show appreciation to @sensorpushtech and @inkbird_us for helping me get my environment under control. Thank you🙏🏼 As many of you know, if you've followed along long enough, I'm a bit disabled and and even more broke💸😕 With that being said, sponsors and friends are a big part of the content I can bring to you. So I could not be more grateful for these people. But I'm also thankful for those of you who follow me and like my content, and show support that way. My deepest gratitude goes out to all of my supporters 🙏🏼💯💚🤙🏼🤙🏼🤙🏼

Engraissage pour fonky monk et Time loop , rinçage et flush pour ice pie et enchantress

2025-07-27 Thsi girl had some defoiliation and we are coming to an end pitils turning brown and plant shows some autumncolors- trichomes are miky so i think the next 3-4 dys she will be cut down xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Gaia F1 has taken its place in the pantheon of F1 hybrid cannabis genetics. Our breeders created these seeds by starting out with parent genetics New Breed Auto, Black Domina, and Sin Tra Bajo. From here, they conducted an extensive breeding project that culminated in crossing three highly pure inbred lines. The result? A potent and fast-growing autoflower F1 hybrid that boasts incredible uniformity and impressive pest and disease resistance. Named after the Greek goddess of Earth, Gaia F1 features a chemical profile that will have you feeling at one with the world around you. After a few hits, you’ll feel the urge to head out and bathe in nature. During your contemplative stroll, you won’t see soil, but a living matrix of millions of microbes; not mere trees, but living and breathing organisms standing tall and proud. Gain a newfound appreciation for the natural world with every inhalation. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Growing Environment Setup & Specifications Lighting System Model: Sanlight EVO 5-150 Quantity: Up to 5 units Power Output: 320W per unit Maximum Total Output: 1600W Environmental Control Management Unit: Growcontrol Growbase Pro Humidity Management: Dedicated Humidifier Dedicated Dehumidifier Temperature Control: Primary: System-controlled Secondary: Additional Radiator for supplemental heating Air Management Air Circulation: 2x Stand Fans Air Extraction: Exhaust Fan with Filter System Irrigation System Primary: Autopot XXL Pot System Water Storage: Flexi Tank Root Zone Aeration: Airdomes Dedicated Air Pump Growing Medium Type: TERRA PRETA MJ-Mix Nutrients System: BIOTABS Method: "Just Add Water" Strategy Type: Organic-based feeding

Nothing to see here ;)

Everything seems alright. Working on the new grow room, starting the next round shortly

Alle 16 Girls sind jetzt in der Blüte, Netzteil wurde gespannt und eine 600w LED wurde eingebaut.

This was an interesting harvest. Everything was going great and the buds/trichomes were still piling on, when suddenly almost overnight plant "C" shifted to about 20% amber trichomes. So I harvested it, and because the other plant wasn't ready yet I decided to try water curing the first one for 7 days. Then at the end of the 7 days, I figured I'd hack down plant "D" and dry them both on the racks in the tent at the same time before moving into jars. The water curing was a huge success! After the first day, the water was cloudy with a slight green tinge. Second day was about the same. Then the water was just a little cloudy each change, no green tinge. Compare it to the diary I just opened around water re-curing some cannabis I bought from the government store, where the water is diarrhea brown :O On day 7 of my water cure, the water was perfectly clear so I decided to hack down plant "D" and get them both drying on racks in the tent together. While water-curing plant "C", I had its trim sitting in a bowl in the freezer. When I hacked down plant "D", I put its trim in the same bowl. After my typical wet-trimming, I hung up Plant "C"'s water-cured buds on the top rack, plant "D"'s buds on the 2nd rack for an old fashioned cure, and random trim from both plants spread out on the bottom 2 racks. The water-cured buds dried within about 24 hours and went into a jar with a 58% humidipack. The buds are SUPER dense and potent! Nice clean high, doesn't kill my throat. The downside is that the taste is really weak and not that great. But everything has pros and cons. Almost no trichome loss in the bucket during the water curing as well -- I was really worried about that! The other buds dried in about 36 hours and went into a jar with a 58% humidipack, where I burped it many times a day for a week. The smell and flavour are much more potent than the water-cured bud and it's a little harsher on my throat, but otherwise I'm not sure there's a detectable difference. However, you can SEE there's a sharp visual difference between the water-cured buds and the jar-cured :) Of course the jar-cured will mature more with time as well. Once the trim was completely dry, I put it in a bag in the deep freezer and dropped it to about -20. I didn't need to use a grinder this way -- I could just mash it all up in the bag with extreme ease! Sifted it through the kief screen, and pressed down 17 grams of lazy-man's hash! After processing the trim through the kief screen, I decarbed in the oven at 200F for 1 hour (this converts THC-A into THC or something to that effect -- if you don't do this, the edibles won't get you very high). I put the trim into a big mason jar and back into the freezer along with my bottle of Everclear. Once they dropped somewhere down around -20, I poured in the Everclear, put the lid on, and shook as hard as I could, as often as I could, for 5 minutes or so. I noticed that as I shook it around, the contents inside would alternate between solid and liquid which was kinda cool :) Shake it one way and it freezes, shake it the other way and it thaws... or something to that effect, anyway. I was able to use a double-coffee-filter to extract about 2 cups of dragon tincture! I threw everything in the coffee filter out -- next time I'm going to do a better job of it as there's a little pile of trichomes that forms at the bottom of the filter which I could put to use. Once I get that down next harvest, I'll have around 99% efficiency milking every last drop out of my harvests! White chocolate is so yummy, as are candy canes... I wanted to combine the two to make some edibles. Looking around for candy cane crush, I decided to check out Amazon. They had the same candy cane crush I was looking at from popular stores, for only a couple dollars more, so I figured sure why not have it delivered. I was planning to get some white Baker's chocolate, but on checkout of the candy cane crush I got a deal for adding on white chocolate Lindt bars for $1.25 a piece LOL! So I bought 10 of those. When the Amazon package arrived, I slowly boiled down 1/2 cup of my dragon tincture in a pot, then used a double-boiler setup to melt down 4 of the Lindt bars in the same pot. Once it was mixed well with the hash oil, I set it aside to cool for about 3 minutes before stirring in 1/8 cup of candy cane crush (plus I ended up adding maybe like a tablespoon more), pouring into a pan lined with parchment paper, and putting in the freezer for 30 minutes. So now I have a nice big chunk of white chocolate candy cane crunch stuff where a piece the size of my thumb gets me super high for like 8+ hours; 17 grams of lazy-man's hash; and 88 grams of bud :) And still enough dragon tincture left over to make 3 more rounds of edibles -- not sure what I'll make next! From now on I'm going to water cure a large portion of all my buds -- not just the ones I grow myself, but ones I buy from the Gummint too!

Today I changed the CFL from 125>250w to try help hold a higher temperature overnight as it has been fairly cold in there. Roots are now touching the bottom of the pot they look healthy and white. Soon I will repot I got a bag of Coco today and some micorizor 😅 just to get new pots I've lost the old ones. Vegging fast these are already showing tiny preflowers starting to form and starting to smell slightly of blueberry muffins

Plant grew out doing its thing , med feeder can handle rough conditions and heat ! Great for beginners