Agora na fase de engorda estou regando duas vezes ao dia, uma vez 4 horas após as luzes acenderem e outra 4 horas antes das luzes apagarem. ppm beirando 1700 e pH em 5.8

Missed updating and taking photos of this girl yesterday so heres the latest. She's doing great and stacking hard and fast. Added a video of all the FFT I've got going as I've never done this before and though it would be a nice addition 👍👍👍

Nugs are not the biggest but looking healthy Royal gorilla smells so fruity and getting some nice purple colors

Hello. This diary is for Nova OG by Anesia Seeds Indica Dom Flowering time- 8 to 9 weeks Height - Med to Tall Yield - High THC- some where between 22% to 32% THC Average would be 27% with %5 + or - That's a big swing. Might not be as stable as I hoped it to be. But I think that's where the strong mutant plants come from. I hope it's as strong as I want it to be. Taste - Very sweet, fruity taste with peppery hints. Aroma- Coffee with lemon undertones Effect - Focused, uplifted cerebral high which is followed by a deep body relaxation. Indoor/Outdoor Medical properties - Yes. Top genetics - OG x unknown strain Special features - High THC Strain. Is a perfect plant for SCROG, and needs a large amount of food. I got new 5x5 grow tents and new Spider Farms lights SF 4000. I've got them set on 50% till see how the plants like them. I've read about the new lights but they are new to me and it might take a bit to get used to. But I got experience on my side😃. Chuck.

Son 2 hafta civarına girdik someklerin en cok şişiceği dönemi gozlemleyecegiz .

Day 35 and 12 days into flower and the girls are looking fantastic. One turned out to be a photo so I've removed it and put in my other tent. The are seemingly loving the Advanced Nutrients. I've fed twice at full strength and I'm nothing growth every day. At about day 21bof flower, I will do another and last defoliation of these girls.

Week five all the plants are doing great. They all grew think upwards of 10 inches this week. Had a little problem with leafhoppers bought me seed meal and name seed oil hopefully that will fix leap poppers problem. All the girls are doing a great fifth week in soil excited to see next week..

Here we have Sleepy Joe Og 😴💤😴💤😴 From Premium Cultivars Soaked seed for 24hrs Placed seed in paper towel 24hrs Once rooted placed in Main Pot 😴💤😴💤😴💤😴💤😴💤😴💤😴💤😴💤😴

Ich selektiere diese Woche die drei besten Keimlinge und stecke sie in 39l Stofftöpfe (ca30l Substrat) mit einer 70:30 Mischung Bio Bizz all mix und Coco.

Día 1 y todas germinaron súper rápido 3 días Día 5 desde puesta en sustrato Ya todas están arriba Estoy solo pulverizando el sustrato Temperatura 23c humedad 75%

Had some fun with that heat stress but all is good check the video Bananabelle is looking gorgeous:)

Right then 7 weeks of flower complete. I'll dive right in to the juicy bits as this week has been predominantly about deciding weather to chop or keep one of my girls going. In the end I chose to do both! As the photos and videos show the plant wasn't recovering so I checked the trichomes and it was actually pretty ripe. A few Amber's on the upper buds. Lowers still undeveloped so I decided to take the biggest and leave the smallest for another week or while ever the plant is healthy. I estimate I've taken around 7oz once dry. Depending how they swell up I'm hoping for a further 5oz of solid bag worthy nugs. Looking nice and frosty, smell is that typical sweet haze with some sour diesel/fruit kick in there. You can see how the photos progress my hands getting covered in resin. Got to give my other 3 some love as they are getting healthier and fatter. I'm thinking another week on one of them and 2 on the others. I'll more than likely stagger the harvest like tonight if it proves worth while. I will update mid week.

11/22 Day 31 from flip. Today is the first day that I took a tape measure from the lights to the topmost part of the canopy and I haven’t seen a change. I’ll check again tomorrow but I’m really hoping the stretch is finally done. I still have about 10 inches of space between the lights and canopy so I think I’ll be ok with that. I took the chance to do what is hopefully a near final defoliation of a few leaves and some smaller sucker branches that won’t amount to much. Everything still looks super healthy, no red anywhere on any stems and no discoloration on the leaves. Everything is spot on. Light adjusted to 840 PAR / 36.3 DLI. 11/25 Day 34 from flip. I made some adjustments to my nute mix to be more firmly at 1.3 EC, which means I’ve added some additional nutes into the mix. I also tested runoff EC and discovered things were spiking a bit more than I’d like. So I mixed up a few batches of my new mix and I’ve been feeding every few hours to flush things out a little bit. I’ve brought it down from 1.9 to 1.5 so far after this. I may finally need to break down and set up some timers to feed multiple times throughout the day. Obviously once a day is not getting done right now. 11/26 Day 35 from flip. I finally got the timer hooked up to my pump to begin automatic watering. For now, I have it set to water at noon for a minute when the lights come on, a 2 minute pause to let that settle, and then 30 seconds more to make sure both are fully saturated. The second fertigation event will be at 6:00 for 45 seconds, and then right before lights off another 45 seconds. I’ll have to keep an eye on it to see if I need to adjust any more for now. I haven’t adjusted the lights since last time, but the latest reading is 885 PAR / 38.2 DLI at the highest point of the canopy. It’ll stay there for now.

end yield of smokeable: 73gs end yield boof: 41.5gs

Week went very well, never had such a good flower before. Some leafes are getting brighter and the ones who dont catch light are falling but its okay. Wish you all the best

Finally I was back. This a massive success in my opinion since she grew completely unattended from seedling stage to harvest. I kept my fan off all the time since I was abroad, this caused formation of mold in the main branch (probably Botyris). I removed it and I lost not more than 8grams I would say. I couldn't do any flushing though I have to say she didn't receive a lot of nuts (the soil was 50% soil from a previous grow and 50% organic compost. Chopping next week

Hi Guys, she seems to recover the slowest of the three plants I damaged in the seedling stage. I decided however to still give her a chance, as the root development looks promising. I have also transplanted her onto the DWC in the big tent. As I don’t have a dimmer for my sanlight, I have increased the lamp height to 65 cm above the canopy, so that she can slowly accustom to the light intensity. Nutrients remained the same.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Trichome immer noch nicht bernsteinfarben. Heute am 78. Tag einen Großteil der Blätter entfernt.Spüle weiter mit Wasser ...Diese Woche nochmals gutes warmes Sonnenwetter.