Likes
Comments
Share
This week I can already tell she’s starting to swell, I’m excited to see how much! I think this might be her last week or so until I start flushing, we’ll see about that. Humidity has been great and temperatures also are under control.
Likes
11
Share
@Souri93
Follow
Belle floraison avec des tache violette
Likes
4
Share
Small review on the viparspectra v300 that I used, maybe it can be usefull If someone are looking for a budget light: Cons: -it's noisy! if you are growing in your bedroom or living room etc.. keep it in mind. -the spectrum it's poor, lot of blue n little red, no green, yellow, orange, uv etc.. -it covers a little less than what the vipar claim. Pro: -among the made in china's led is one of the best built and has a long and reliable warranty period. -it's really good for vegetative. -it's very cheap to conclude, it will grow your plant quite well but do not expect super results.
Likes
1
Share
@LAShugars
Follow
Growing great! Strong and healthy 👍
Likes
3
Share
Empezamos su 5 semana de vegetación y lo hacemos a lo grande 💪 Hemos cambiado a esta pequeña de casa, pasando de una maceta de 7L a una de 18L para que termine su crecimiento en ella. Aplicamos tambien la malla de scrog para empezar a entrenarlas y no tener problemas 👌
Likes
4
Share
Processing
Likes
37
Share
@MG2009
Follow
07/12/2018 All looking healthy and happy,females everyone!. In pre-flower 15.03 min of light by August 12, it will be down to 14 hours of light an in flower. 07/15/2018 Uploaded a couple videos enjoy
Likes
24
Share
Die dritte Blütewoche startet für die Ladies und sie bekommen noch etwas Proviant mit auf den Weg. Sie bekommen jeweils 20ml Orgatrex und 1g Bactrex, gelöst in einem Liter Osmose Wasser. Ich habe den Autopots einige Tage vorher die Wasserzufuhr abgedreht, um sie nicht zu fluten. Für mehr Stabilität habe ich ein zweites Netz reingehängt. Außerdem habe ich zwei ungenutzte PC Lüfter ins Zelt gelegt um für etwas mehr Umluft zu sorgen. Desweiteren wurden einige Blätter entfernt. Die Woche neigt sich dem Ende zu und die Pflanzen sprengen das Zelt. Die Lampe hängt mittlerweile auf Anschlag.
Likes
24
Share
@Natrona
Follow
Divine Seeds Auto V.2 Contest Big Demon Auto W5V5 7/6-12 Big demon auto is stacked close together. I think there were 5 or 6 nodes so I topped her and used pins to tie down the limbs. I also lollipopped and cleaned out all the under growth.. She is 6 inches tall after topping. Giving water only for this grow. 7/6 2 liters ph 6.5, ppm 238 to get the pot wet. 7/8 1 liter ph 6.6, ppm 262 I included videos of the ph meter with water, iridium glass & iridium glass and copper. When in water only, the ph meter climbs steadly, in iridium, there is slight jumping in the register. When the readings are taken with copper and iridium, the ph meter jumps up and down in wide ranges. So there is marked energy emanating from the glass and from the copper. What is it doing? I don’t know but stay tuned thru the grow to find out. As aways, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿o 💫Natrona💫
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
89
Share
@Targona
Follow
64 days since my little girl sprouted from seeds🌱 Ninth week of growing my Red Pure Auto CBD 💚❤️💚❤️ Nutrients: Nutrients: Terra Aquatica FlashClean - T.A. FlashClean is a specially designed cleaning system that removes (dissolves) salt residues from fertilizers, but also allows new nutrient binding between plants and the system. These properties help plants to make the most of the nutrient content of fertilizers, especially in the crucial period before harvest 💦🌊💦 ---------------------------------------------------------------- ------------------------------------------------- BioBizz Bio pH- is an organic pH regulator. An aqueous solution of citric acid, which occurs naturally in citrus fruits 🍋🍋 ---------------------------------------------------------------- ------------------------------------------------- Terra Aquatica pH Test Kit - Very reliable, easy to use and inexpensive. The pH test kit conveniently replaces expensive pH meters. It includes a wide range from 4.0 to 8.5. 🌈 Overall: Red Pure Auto CBD 💚❤️💚❤️ - In the end, Red Pure CBD also reacted badly to the nutrients. It is true that I expected it and I was rather surprised that it was still so beautifully green and looked healthy by the color 🍃🍃 I already have the nutrients tested and a watering schedule ready for the next round. But I feel sorry for these plants, because I tested the nutrients on them. But there is no other way 😔 Anyway, despite all this, all the plants look quite decent and even judging by the harvest of the first two plants, it doesn't look bad at all 🌾🌾 I have already rinsed this plant, first with FlashClean and today with clean water with pH adjustment 🌊💦 I think I could harvest tomorrow. Training: Training is out of the question at this time, I just cut off a few leaves 💚🌞🌞 Light: Mars Hydro TS1000 The plants are responding effectively and the light is technically very well managed - I try to have 50 cm between the light and the plants, so I regularly move it up 💡💡💡 Thanks for the likes :) See you soon 😍😍
Likes
3
Share
Got to love some 🍧 Here we are somewhere in week 3 and she look banging very healthy very happy for sure ,stayed rather short compared to her friends but i rather have them short than tall anyway ,starting to put on flowers so last night ive cleaned her a little bit so top flowers can get all the energy,been feeding every other watering so far so good 😊 💚
Likes
4
Share
COLOCAMOS LA MALLA Y CAMBIAMOS EL FOTO PERIODO A 12/12. COLOCAMOS BIG ONE PARA EMPEZAR LA ESTIMULACION DE LA FLORACION
Processing
Likes
7
Share
@Kushizlez
Follow
Day 70-77 (Day 71) Not exactly sure why but node spacing on bbb 6&7 is super tight still. Their stems are also harder and less bendy, almost like they’re root bound. Bbb #5 in my veg tent is looking bizarre and I’m at a loss for what to do. I’ve been looking up and asking around about the leaf crinkle and no one seems to know what’s wrong. Trashing a pheno of this would hurt. It could be a keeper too as I don’t think the problem is genetic. It’s definitely root bound but that doesn’t cause contorted new growth like that. I’ve concluded that it’s my dense soil coupled with root bound issues, overwatering and high RH. (Day 72) Later tonight I’m going to give bbb 5 a bath tub flush until it’s reading 200ppms, drain it well and then transplant into a 3g pot with lightly amended soil. I’m also going to give it a light defoliation. I don’t mind stressing the shit out of this plant right now because I won’t be flipping for another week at least. With the small container it will run out of amended nutes mid flower so I will hit it with a few synthetic feedings around then to test out the smokabilty and taste compared to organic nutrients. I might as well give the rest a good defoliation on the rest of the plants too. I will try to get most of what is under the trellis. (Day 73) I definitely defoliated #7 waaay too much. Since it’s tucked away in the corner and a really bushy plant I can’t train it as well as the others. I cut most of the sucker branches and the majority of the lower fans. This should prevent the need to defoliate at all until week 3 of flower. (Day 74) I’ve been reading that higher temperatures with a high RH can affect growth big time. It could be what’s causing all the crinkling and twisting. And now that the plants are in very late veg they could probably benefit from a lower RH. When I was running my temps around 74-78F and 70% RH I was in the perfect range. Now that I’m around 82-86F with the same 70% RH that could be what’s causing it. Hotter air holds more moisture than cooler air and proper vpd at 84F is around 75-80%. I’m going to turn up the speed on my carbon filter and set my controller to 75%. If I don’t see a difference or it gets worse I will drop to 65 and go from there. (Day 76) I finally got the lights raised up another 4 inches or so. It’s not much but it should help reduce the intensity and stretch the nodes more. I’m starting to think the super tight node spacing and droopy/contorted growth has more to do with something I’ve been reading about called ‘soil compaction’. Apparently farmers often deal with compacted soil in fields from running tractors over it all day. When I potted the plants I gave them a good little jiggle to compact the soil down further so I could fit a bit more in the container. I think this could be the culprit as they don’t seem to be drying out evenly. Even the plants in my other room are not drying out like they should and it’s probably from compacting too. With the addition of rock dust and dry amendments the soil can become sandy/clay like and retain a lot more moisture. Wish I would have added a few more liters of perlite and packed the soil a bit looser. Either way I need to get this problem sorted ASAP before I get root rot. Earlier in the season when I overwatered, I stuck a fish tank air pump into the soil and it aerated the soil enough to prevent overwatering. The only reason I discontinued it is because it didn’t have much effect in the 1.7g pots. I just ordered a 36w 6 way fish tank pump that is way more powerful. It was 50 bucks and I’m willing to take a gamble on it. It seems to be my only option at the moment because I can’t just repot. Worst case scenario I can use it for brewing compost teas if it doesn’t work. I’m not sure how well this will work in a giant fabric pot but it’s worth a shot. I’ve heard of people supplementing additional air into raised garden beds with great results. I’m picking off some of the new auxiliary branches to try and widen the node spacing. Growth is definitely slow and stunted but no signs of deficiencies. I just thought of another theory on the node spacing... and the more I think about it, the more I think it’s the mystery problem. I’ve been foliar spraying with 1-1-1 VeloKelp at pretty high concentrations 2-3 times per week. I have heard in passing that kelp and seaweed can somehow reduce stretch. A quick google search reveals that Ascophyllum Nodosum Seaweed and other marine algae extracts contain large amounts of hormones and auxins that reduce plant height and stretch. *facepalm* Guess I’ll stop that for the rest of the cycle. As far as I know there is nothing I can really do but wait for the plant to use up all those excess hormones and nutes. The recent 0-0-15 seaweed extract and 1-0-3 kelp meal I bought is derived from the same kind as the velokelp. I guess I won’t use it again until week 3 or 4 in flower. Tight nodes are very useful in flower but aren’t desirable at all in when trying to scrog in veg. Especially when they’re like a half inch apart. It slows the shit out of a grow. Vietnamese and biker gangs in my area used to grow SOG style and use a synthetic PGR hormone (meant for bonsai trees) called ‘paclobutrazol’ that would make the weed rock hard dense so they wouldn’t have to pay people as much to trim it. I’ve heard that in recent years they have made the switch to using kelp extracts because paclo is getting harder find and is not meant for food crops let alone smokeable crops. I’m ashamed of it but I have smoked pounds of PGR weed long before I knew what a PGR was. 🤷‍♂️ (Day 77) One more theory. Ever since raising up the plants up onto that shelf the root zone is probably significantly warmer and the bottom of the pot (where most of the roots are) drys out way quicker. It’s possible that the warmer root zone could not be holding dissolved oxygen at the proper rate resulting in that over/underwatered look. Or it could be that I’m not watering enough at once to reach the bottom of the pot where the roots are and it’s indeed under watered. I’m going to water in a gallon when I get my new air pump and see if that makes any positive change. If I see the new air pump making a difference, I will flip on the 21st of April. If I don’t see a difference, I will carefully untangle the plants from the scrog net and remove the shelf. That extra foot should make a massive difference with ppfd and will cool down the roots significantly too. I’m thinking about grabbing a simple soil/compost thermometer to check the temp of the medium. Better safe than sorry. Rough week. Hopefully everything get smoothed out in the next little while before I flip.
Likes
12
Share
WEEK 2 DAY 14 Since last week the babies have taken off! They didn’t have much light until yesterday when I added another 100w led and since then I’ve seen a huge difference ! They are looking super healthy the roots said fuck the pot and grew right through it I’m actually super interested in seeing how these grow up.. The 3 clones that were separate last week are now moved into one single pot to further develop the experiment. They are on the same feed as the mother with flora grow/micro/bloom and cal-mag . And In the last picture you can see my ghettos man way of cloning .. going to see which 2 out of 4 are better rooted and I will move those to a pot in about a week or so. If you guys have any questions or want to know where I got these exotic seeds message me!! Or comment below !
Likes
12
Share
Likes
15
Share
@Siriuz
Follow
Hey guys what's up ? Today we're feeding sweet gelato Also we're adding extra LST To secure the lady and make her grow even some more ✓ She's doing good, taking her time Now she's comfortable in that big pot She's got a mega mix soil w a lil bit of everything good for her to develop well thru the stages Also we've got good temp and good humidity lvl For now on just gotta keep feeding them and securing LST because soon she will become a monster and if we miss one day it's going to be really hard to follow, sometimes LST can be really hard to do and takes tons of your time but all of it is beautiful :) Alright guys I guess I will keep you up date if something comes up!
Likes
16
Share
@Xpie77
Follow
Really nice that u check this page, its very much appreciated, thanks! This week all is in flowering and the flowers now quickly getting fat! Ive started with nutrition: Sea weed 15ml/10L P 8ml/10L Bloom 30ml/10L Molasse 20ml/10L Silicium 10ml/10L