Likes
16
Share
@DrShotzUK
Follow
SUGARLATO - THE GREEN HOUSE SEED CO…
Likes
2
Share
First Durban poison seed did not germinate just put a new one in today. Both Apple strudel strains are looking strong. One of them has a slight spot on it could be from spraying neem oil and hitting it with the light Sweet skunk is growing nicely And the older of the 2 mystery auto strains from fast buds will be transplanted soon Started LST 5/15
Likes
4
Share
@Adam22
Follow
Smell is amazing like fizzy pineapples it overpowers the cookie dawg smell but the combo of the strains is also amazing the slight cookie and chem smell inside the tent. Will re pot these all and hope they all females due to the seeds being regular and not feminised. All looks good will keep eye on pistils to appear or not. I am always using the same feed: Coco A Coco B Canna Rhizotonic Cannazym Canna cal mag Canna boost Ph up
Likes
5
Share
Buds buds buds fattening. Light power up at 100% slowly:)
Likes
2
Share
2/3 plants started showing signs of too much light. Dialed light back and symptoms of yellowing tips have slowed. All have been defoliated as needed.
Likes
2
Share
Day 21. Plan to hit em with a good defol and one more top dress. I can push them a little more as I have no burning what so ever. As of now, no issues, just a few gnats. Day 22- thinned them out just a little, no major defol as of now. Mbrxgp so far smells lemon/citrus on the leaf rub. Nothing from the PR
Processing
Likes
37
Share
@MG2009
Follow
GTH SEED #1 in training, just super cropped on one side to even conopy. The first site im recording will be a clone,it is on back side of plant and will not produce. #2,#3,#4 pics,#2 is stripped of leaves at about 12 inches. 06/16/18 #4 is showing pre-flowers,#2,#3, no sign yet. #1 check in the morning. 06/19/2018 Still no pre -flowers on #1,#2,#3, #4 however is female so I Fimmed her to encourage side shoots to grow biggest of wider canopy. #1 reacting well to supercropping 20 tops as of today. Praying she is female🙏🙏. She is a stretchy girl in flower 2 to 3 x her vegged height so trying to be low profile as possible.👍
Likes
4
Share
Some colors is starting to show going hit dem one more feeding and start my flush
Likes
16
Share
Vamos familia, actualizamos la segunda semana de floración de estas Panty Punch de Seedstockers, salieron 3, que van creciendo a buen ritmo y tienen un color espectacular, veremos cómo progresan. Empezamos añadiendo varios productos de la gama de Agrobeta para la Floración. Temperatura y humedad dentro de los rangos correctos. Ya realizaré el trasplante correspondiente a 7 litros. Vamos viendo cómo avanzan estas próximas semanas. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
9
Share
@Deeng
Follow
Lst is a little hard in this plant, because it has very shor internodes, but lets see how it will evolve The plant is beginning to show some preflowers
Likes
9
Share
@pzwags420
Follow
On day 1 I transplanted 2 BB clones into 3 gal smart pots with coco coir. I watered them in with veg formula and set up my blumat watering system with week 1 flower nutes. I raised PPFD to 600-700. On day 2 the reservoirs PH was adjusted from 6.4 to 6.0. The rez is 823 ppm. The tops are 16.5" from the grow light. The blumats have not started watering yet and I will monitor to ensure it goes smoothly. I have the blumats set at 1.25 carrots on left plant and 1 carrot on right plant. The average PPFD of my 16 tops is 703 PPFD. I increased temps to 85 day 81 night to get leaf surface around 80 f during day. On day 3 the reservoirs PH is 6.2. The rez is 782 ppm. The blumats have started watering and I will monitor closely over the next few days. On day 4 the reservoirs PH was adjusted from 6.3 to 6.1. The rez is 717ppm. On day 5 the reservoirs PH is steady at 6.1. The rez is 706 ppm. The highest top is 15.25" from the light. I defoliated to bring in more air and light to deeper into the canopy. I increased the flow rate of blumat by .5 carrot on the right plant as it was a little to dry for my liking. The Clones are preforming well. On day 6 the reservoir PH is going down so I adjusted up from 6.0 to 6.2. The rez is 730 ppm. The highest cola is 14.75" from the light. The left plant had a runaway so I reduced blumat by 1 carrot. I increased flow of blumat on right plant by .5 carrot as it is still drier than I would like. On day 7 the reservoirs PH was adjusted from 6.3 to 6.0. The highest cola is 14.25". I reset rez with nutes.
Likes
6
Share
Still going strong. I think mid week 5 now since flip. So week 4 of true flower. Lowers are solid, I forsee this being very dense.
Likes
25
Share
Humidity a bit hight??? Bud rot, been checking very closelym Water stressing, packing on the resin
Likes
8
Share
Me fui de vacaciones y la planta creció mucho. Tuve que volver a hacer LST por qué aún queda crecimiento y se me van muy hacia arriba lo que no puede pasar por los ladrones. La verdad espero una gran producción si todo va bien Familia Gorilla son unas bestias
Likes
54
Share
@AsNoriu
Follow
Day 65 since seed touched soil. Big disaster in garden !!! I added epsom salt and didnt phed , was in a rush to overtime, they dranked in 3 days , that was unexpected .... AK has root damage as rest, but on canopy i found 5 spotted leaves too, reminds calcium .... Hate myself, ph test kit was on table too, prepared, i just f@cked up in rush ... Running out of space. Mars Hydro TSL2000 is doing great job, two plants are like 5 cm away , still no signs of burn. Try to keep humidity in 65-70 % range, temps around 22, nights 20. All works. Will top up this week with next watering, want to give one plain. Wrong Ph led to slow uptake, AK is in limbo, behind couple days by weight, if troubles are bigger than i see now - maybe even 3-4. So sad .... One time wrong ph and you can damage garden heavily ... Close up bud photos were taken under max light, so colours are false. Day 66. Damage is done, see calcium rusty spots around,leaf colour not the best ... At least drinking normally, loaded 5 liters yesterday eve. Hope to do watering and top up this Friday. Day 68. They drink fast, 3 days were needed only. Loaded 5 liters again. Made top up. See bleaching, raised lights , have 10 cm left. Top up was dosed, mixed well and laid on top, then i rough and mix top lair of soil with top up and only then i water. All pots are 30 litres ( grams and ml , have in mind ) : Plant Success - Great White - 5 ml / pot Ecothrive - Biosys - 5 ml / pot Ecotrive - Charge - 120 ml / pot Ecothrive - Life Cycle - 60 g. / pot Ecothrive - Bio Blend - 200 ml / pot. Happy Growing !!!
Likes
10
Share
Day 64 I did major defoliation on the girls the nutrients have been mixed up for the transition. This week into flower PPM at 1150 par on the girls is 800-900 with my phone app the water temp has been vary good at 65F the girls can drink close to 200 PPM a day and all I really replenish is the Cal mag until the week is finished I also have some overflow of the nutrients inside the system I remove 5 gallons and add back a gallon or so a day along with the fresh water Day 65 well.... The girls used 20L and 200 PPM in 24H! Ppm at 950 now lights at 15in now Day 66 added a little cal-mag as well as the rest of the nutrient water from the exchange PPM at 1000 now lights at 15in Day 67 no reports today 🙂 Day 68 girls filling up again PPM is at 750 Day 69 water like usual pmm 660 now Day 70 last day of my veg ppm at 550 going to go 12/12 tomorrow excited
Likes
13
Share
@Bluemels
Follow
Tag 50: Läuft ganz gut mit der "Unbekannten"
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Processing
Likes
3
Share