The Grow Awards 2026 🏆
Likes
Comments
Share
@Puraweeda
Follow
The Gorillaz zkittlez (on the left) start to be really sticky. And smell like zkittlez... One of them has some really Orange pistils. The blue sherbet x purple punch (on the right) is a little bit slower. Less trichromes, less smell. Bud the bUds start to be nice as well. As the brand suggests at the 4 week of flowering I add 5grs/L of guano for flowering stage on the top of the soil. No pk booster this time for watering. Maybe I will put the minimum amount of power feeding booster the next watering.
Likes
2
Share
@Ninjabuds
Follow
My Skunk Apple Run plant is still a bit young, but I can see those buds starting to form. It's a bit of a slow starter, with buds popping up all over the place instead of a nice even line. We'll see if adjusting the light cycle or its food might help it along. I'll keep you posted on any changes. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.
Likes
283
Share
D28 - The first day in the fourth week of veg for Nordle #2 and the start of the third week for #1. I gave both girls around 2.5-liters of the compost tea I started brewing yesterday, and for once, I remembered to check the pH and adjust it to 6.5. Yay, progress! D29 - Today, it was finally time to top the second girl. She was already seven nodes tall, around 30 cm. First, I got everything together as I prefer to have what I need before starting instead of running around looking for something mid-process: Snips, a couple of glasses with water to put cuttings in, bonsai wire and soil staples, clone-gel and a new razor blade, dwc cloner, peppermint oil and Q-tip. After cleaning the snips thoroughly with alcohol, I topped her just above her fourth node. I'm going to mainline her, so I removed everything below the fourth as well. She went from a lush lady to a stick figure! I secured her remaining two branches using staples and wire. The final touch in the tent was to put some peppermint oil on a Q-tip. Bugs and pests are attracted to the scent of injured plants. On the other hand, they hate the smell of peppermint oil, and it should deter the critters even though the girl smells like a buffet. I bought this tiny DWC system for a few bucks off Amazon a while back and want to try it as a cloner. (The primary purpose of this cloning project is to practice taking clones, plus see how well this hydro system works.) I trimmed each cutting before lightly scraping the stalk, making a fresh cut with the razor blade, and finally into a net-pot. I had planned to put some clone-gel into the water, but it turned out that the bottle had gone bad since last time. Oh well, pure water for this test run then. Finally, I cut up all the removed leaves and stalks into small pieces and distributed them on top of the soil in the pot. Have to keep that nutrition cycle going. Plus, like this, I don't have to worry about safely disposing those telltale leaves. Win-win in my book. D34 - The final day in the fourth week of veg for Nordle #2 and the end of the third week for #1. #2 has recovered great after her first topping, and I'm planning on doing her second topping tomorrow, six days after the first. #1 is a week behind so I'm planning on topping her in a couple of days as I want to make sure that her fourth node is at the same height as the fourth node on the second girl. The clones are looking really healthy but no roots yet but maybe that is to be expected considering that I'm using no rooting hormones.
Likes
2
Share
Venga familia que ya viene la cosecha de esta Amaretto Tarmac de Seedstockers, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte se ven bien resinosas, y tienen un color rosado púrpura brutal. a sido una genética con la que disfruté mucho cultivarla, no es complicada de cultivarla pero merece la pena si eres cultivador con experiencia las flores serán increíbles. Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
14
Share
It’s time for re-grow systematically!! So proud to be a grower Trying to learn new things Welcome every advices and share me about growing techniques #workharder#growharder
Processing
Likes
27
Share
@HELCIBAO
Follow
The ladies gain a good size Elizabeth look ready to enter flowering This strain grow really fast😲 from now I try to push them with 24h light on😈 let's see if both start flowering this week👌 -------------------------- UPDATE DAY 25: (finally i've a decent camera so you'll see better pics from now) Got some trubble yesterday morning, Elizabeth started silcing from the topped part 😟 (probably due to excessive lst). Luckly she didn't even noticed it 😅 (i've fix it as soon as i found it out), she continue her road on flowering. While Irene probably will start in next 2-3 days. So next week we should start with flowering. P.s. already started developing a very nice smell👌 next week i'll probably start a time-lapse for flowering
Likes
8
Share
@Sinktip
Follow
It's bizarre how tall one of the four plants is getting. The other three are short - about 60 cm but the one is a good 30 cm taller. Fewer buds too. The entire plant just looks like a different strain. If it is, then I hope it's feminized - I don't want to have everything go to seed!
Likes
12
Share
@thonhash
Follow
En esta última semana de prefloracion, aprovechamos a hacer otra poda de bajos y defoliación (como podéis observar,si se ha llevado bien hsta ahora el cultivo,y hacer correctamente los cortes,y en su momento, se recuperará en apenas horas/día. Seguimos regulando el led a un 75/85%(225/240w aprox) y entra en acción el terpesyn. Volvemos a aplicar enzynabis
Likes
6
Share
@Lickey
Follow
I had a dream last night that my dog had a human scrotum.
Likes
24
Share
Bueno ya creo que para la próxima semana estás nenas estaran listas para cortar, ya llevamos 1 semana con solo agua y final flus
Likes
18
Share
@Stonyways
Follow
relaxing and enjoying the show almost at max watts SPIDER FARMER SF2000 is now maxed out at 207w , 16"-18" from the plants and I will need to keep up with pruning to allow more air flow and more light to penetrate deeper into the plant. 2, 6" oscillating fans on 100%, may be on low or just one stationary but at this point in the grow air flow is a MUST, specially for the thick, dense vegetation of the OG Kush. trying my hardest to stick with the 4" ventalation til the end of the grow. Right now I have to replace the exhaust ducting due to tiny pin holes leaking more than a bit of light.
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Likes
3
Share
Likes
16
Share
@Max1973
Follow
Day 52 - before pic/vid pulled em both out scrubbed tanks..... moved em into a different tent, with a different light.... did up completely different solutions, and currently still building it all.... Day 53 - still buildin... vids of new home... Nutrifield, Rock Nitro, 1200-1500 ppm and 6.5 PH.... see if we can give em a good boost.... left em in pure water before puttin em in new solution.... Day 57 - pics vid.... been adjusting ph... down to 5.8.... they are just growin along nicely in the new home... got a fan for the tent... looks good tho... solution temp is abit high, fan will fix that..... changed just the tanks to 5lt Cereal containers, they are alot taller, more room below the container... fits perfect.... Day 59 - pics vids, , 6.2ph, 1300ppm ... water temps been getting abit high, fans should arrive next week.... 👍😎 120W Aluminum+PC Plug 2835SMD 7995-9594LM 1131Pcs Red+234Pcs Blue * Blue(wavelength: 430nm, 554nm * Red(wavelength: 630nm 660nm)
Likes
2
Share
@Theia
Follow
ve repotted into her final 15l auto pot. The procedure I used is as follows. Items needed.. Clay pebbles Hydro coco 60/40 clay pebbles/Coco. Silicium Flash Startrex Mycrotrex Bactrex And of course Bio tablets X2. 15l of hydro coco was mixed with 25g of Silicium Flash and 25g of Startrex. Mixed up well to form the main substrate. I filled the autopots to a depth of 5cm with clay pebbles and then layered up the amended substrate making a nice hole for my 300ml nursery pots. Into this hole I sprinkled in 5g of Mycrotrex and then dropped the seedling in. This then gets 2 biotabs pushed 5-8cm into the substrate and 1l of water mixed with 5ml of Bactrex I need to top feed the autopots for a couple of weeks so the root system can establish before I transfer to my flower room and the gravity feeding trays..🤘🏼👍🏼 I'm keeping temps at a constant 25c and lights are on 24hrs a day. Rh is sitting around 65%.it too low hence the domes but then it goes too high. I'm going to run a couple of days with the 65% but vpd over 1 is a bit high for so early.. we shall see. I'm more than happy with the purple punch. Considering when she was a sprout she grew out of her Coco plug and I found her flat on the floor...She is doing great. I'm a little concerned she is getting too much light. The others are all happy but punchy looks like she is a bit stumpy compared to the others. I've moved her to a side position in the tent so she gets a little less direct photons..
Likes
17
Share
@Naujas
Follow
This is my second growth in a suitcase, I got 30 grams of dry flowers from the first growth, but this growth together with FastBuds is obviously much better than the first one :) although the girl's leaves burn from the light, which is only 10-15 cm from the flowers, but the girl copes with it perfectly :) good luck to everyone.
Likes
20
Share
Flush week is here! Or was here lol. I was behind on my journal's and I've actually already chopped the girls (pics included) and will update soon with a harvest week as soon as they are finished hang drying. The trichomes were cloudy white with roughly 20-30% amber trichomes and some wonderful terp aromas from each. 100K has a smell and taste (we sampled a bud dried in a paper bag, was fantastic) has a similarity to Slapz from the same release and it is honestly a great flavor and aroma to have. She also has hints of nutty earthiness underneath from her White Truffles and they blend well together. Grandaddy's terps vary going down her branches so far. At the top her grapey berry aroma is dominant where as the lower buds are more heavily of flowers (violets, i agree with leafly on that aroma description for GDP) with hints of the berries. A sample from a paper bag was mostly of violet flowers and smoke smooth with a deep relaxing high. Better info to come with the harvest week update! Plants were left in 48 hours of darkness with attention to airflower kept to prevent mold Our drying set up: The tent light is off, with oscillating fan removed. Only an intake was left on the bottom (removed oscillating fan after 1st day was too much) with a small monkey fan pointed across to keep it moving along the floor, with the exhaust running up top to keep even airflow around the buds. I'm trying to avoid any direct airflow on the buds. The trellis net is lifted to the top of the tent, to hang the branches from easily with plant wire. Our drying conditions: The branches are hung individually after snipping off larger fan / water leaves, we try to leave some of the smaller leaves to help protect the buds and their terpenes. Our environment we try to keep in the mid to low 60s, but never higher than 68 (I prefer 66 degrees farenheit) and the humidity we keep around 60 to 60% but no higher, and preferably never lower. This is to protect the terpenes and cannabinoids from evaporating due to heat or dry conditions. I changed to this method after some research and owe the idea on temps and humidity to Matt from Mr Canucks Grow on Youtube, it's a more recent video of his from within the past year and was very informative.
Likes
9
Share
@Mo_Powers
Follow
summer has arrived in germany. the little one likes it very much. she is reaching out for the sun's rays to grow. she is doing well so far and i am confident that she will really step on the gas in the next few weeks.