D57/FD29 - Thing going grand with the Cookies so far (enjoying growing these Cookie Based Strains). Smell from it is divine! Touch a stem and its a lovely citrus smell left on you for ages! Noted in a previous comment, like a perfect sweetness, fresh lemonade. You'd wear it as an aftershave alright even!!! :P They're drinking a ton but not taking on as much feed (as I've come to expect now in flower) so dropped the base and bloom by 10% (same recommended ratio of 1:1) and kept the PK9/18 booster in there at what would be recommended strength for this week...its the same as last week but week 1 (week 4 of flower) of PK9/18 should have been double...didn't want to overdo it as when I used recommended strength 1st time I got it, it created some serious root zone acidification (Which could have been all the K getting used up but was a mare getting the pH up from 4.something every day!!!). Did my usual root flush/wash before adding feed as the EC had crept up to 2.2 (and I know from experience, that starts messing with your numbers if you don't wash that out right) and took about 50L-60L to get the tank to 0.3EC (base is 0.2) was was a lot of salt sitting on/in the roots. Had a ton of underscreen dead leaf to pick up and just cut some wee straggly offshoots (I know, bad idea this late in flower but they were basically dead/no nutritional value left so basically a bug magnet). Still waiting on Bluelab to send me the RMA approved pH pen...been 2 weeks now since the RMA was approved and still no postage - using an "essentials" pH meter and just dipping in Calibration Fluids between each feed add to ensure some accuracy (As you can see from my recipe page, I like to know what the feed does to the pH - also gives an idea on what they're feeding on when you see pH swings in a different direction that expected). Geeklight also got back to me. In all fairness, I've been dealing with them direct (Got the light fixture from Alibaba, direct from China - big gamble, right???) and they have been more than helpful. I have been telling them about the light randomly coming on at 5% (lowest brightness) and provided evidence; turns out someone else now noticed the same issue with the Remote App controlled variant too and they believed it was a loose control board/wire. They said they did some stuff and that fixed it but I also thought mine was fixed by forcing the dimmer to 0% and it still randomly happened (even though it didn't do it for weeks) so the other person may still get a surprise!! 😋 So, I took out the driver today, pulled out the control board and all wires seemed good and no looseness in the control board (although it does look slightly bent as the Spade for the IR/UV switch isn't fully bedded in). But, like I say, in all fairness to Geeklight, they're posing me a new control board tomorrow from China AND giving me the longer driver cables so as I can put the driver outside of the tent! Give me a bit more room for my Flower Initiator (and hopefully UVB Tube) and great to see them honouring the Warranty. RHC Seems to be flowering nicely as can been seen from the pics. Stacking well, buds coming along. Slight pinkish tip to the pistils on some buds but not the shocking pink as you'd see in the sales pics...hopefully it goes there though! Also noticing a bit of an early frost on a few flowers...like real good frost! And this is only day 1 of week 5 (I know, I do this diary arse about face)!!! Hoping Geeklight get this driver control board and longer cables to me quick so as I can get the driver out of the tent as I'd really like to get the UVB in there to frost them up in a week or 2!!! May only be getting about 9" clearance though so dunno, could be dangerous!!! 12" is the lowest recommended...but then, I could do the 15 min burst lighting (On 15, off 45 min every hour) so lower the risk of burn but get them more exposure (but lowers the lifetime of the tube). They get UVA from the LED's on the light at the moment for a 1/3 of the day and have been since early veg so should be hardened to it by now!!! Anyway, think that's enough s**te chatted by me!!! Happy growing all!!! 💪

🌸 Week 20 Update (Flower – Week 3) The tent’s alive with energy this week 🌞🌿! Red Hot Violet is absolutely thriving 🔥💜 — strong structure, healthy stretch, and bud sites forming beautifully 🌸💎.On the flip side, Amaretto Sour 🍋 seems to be getting a bit choked out 😕🌱 — growth has slowed and she’s fighting for space and light 🌤️. Planning a careful separation this week 🧤💧 by filling a tote with water and gently working the soil apart

Its winter so i connected a air hose to my 45watt fan and i blow in warm air, the other side of the hose is right above my gas heater downstairs. The out fan in the tent is on 65watts my tent stays 20celcius and humidity under 50%. I dont think my plants like this “warmed air” as my seedling curl up completely if i put them in the same tent. Its either this or let her freeze. My yield will suffer as it does every winter but hey spring is coming in a few months then its back to party hardy, or grow hardy in our case.

Athena blended line is doing very well

This one is such a beasts. It keeps growing and it's so bushy. Cutted some leaves to get more airflow because i saw one leaf with mold on another plant. Startet with the "more grams"

Realized when I setup the soil that I forgot to give it a good soak and allow to sit for 24 hours. It's just straight out of the bag and I feel like I'm not watering them enough.

Sie wachse weiter, aber diese Woche werde ich ein Netz kaufen und aufstellen. 成長を続けていますが、今週はネットを購入して張る予定です。

Outdoor temperature up 15C. Indoors, in grow room, 5C up on last week. Epic week of growth - lush, green canopy. Finally understand the bouncing PH issue. Weird that no-one talks about it for the beginners. Your DWC needs daily attention. In any 24hr period, the PH rises from 5.5 to 6.5, and must be brought down again with PH Down. Thus in any one day the roots span PH=5.5-6.5 and are capable of absorbing a range of nutrients, which are absorbed into the plant at various different PH levels. Currently feeding 13l pot with 5-10ml of Ionic Hydro Bloom daily (EC=1050-1150), 5-10ml of Liquid Oxygen daily, 1l of water daily. On Sundays, they also get 15ml of Liquid Silicon. PH adjusted daily. No sign of buds developing yet.

19.07. OG KUSH Day 85# I have nothing special to write, the plant is progressing well, although it could do better, but it is constantly under some stress, or there are strong storms or great heat, and so on in a circle. Yesterday was the end of her twelfth week. Stay High and Keep Growing!!!

Moin 😎, Woche 11 ist vorbei und die Damen gehen so langsam in Rente. Und zumindest die Papaya sieht auch schon so aus. 👻 Ich reduziere jetzt schrittweise die Wasserzufuhr und die Lichtstärke. Hatte bis jetzt so um die 1000 PPFD in der Mitte und 850 an den Rändern und ich gehe zurück bis auf 600 PPFD in den nächsten 10 Tagen. Weiß nicht, ob sie noch viel länger brauchen werden. Trichome sind 70% milchig und 30% klar. Auf den Zuckerblättern schon das eine oder andere Bernsteinfarbene. Ich habe mir einen 150L Weinkühlschrank zugelegt (siehe Video) den versorge ich erstmal provisorisch mit einer Umluft und eventuell schon einer RH gesteuerten Abluft und dann werde ich Buds zum Testen schonmal reinlegen. Ich möchte Next Level Qualität und beim Grow kann ich kaum noch was rausholen. Jetzt muss die Trocknung optimiert werden. Als Tipp kann ich euch schonmal mitgeben, dass ihr am besten beim Trocknen einen VPD von 0.9kPa aufrecht erhaltet. Egal wie die Temperaturen erstmal sind. Der VPD ist auch bei der Trocknung verdammt wichtig. Vielen Dank für euren Besuch und bis demnächst (und bald zur Ernte) Terp 💪👽

🍇 Purple Haze Photoperiod – Phenotype B | Week 4 (Vegetation) The Bush That Wants Every Ray of Light Week four belonged to Purple Haze B. While her sister is preparing for life on the AutoPot system, this girl is following a different path, remaining as a hand-watered control plant for what will become a very interesting side-by-side comparison later in the grow. Even though they are sharing identical conditions, genetics, nutrients, and training philosophy, every phenotype writes its own story. That is exactly why I love phenotype hunting. This one has chosen to become a compact jungle. ⸻ 🌱 Week 4 Overview What a transformation. During the week she exploded sideways, filling every available space with healthy branches and fresh growth. Instead of stretching upward, she invested her energy into building a dense, symmetrical canopy that is becoming thicker every single day. From above she already resembles a small green island. Large solar-panel fan leaves overlap beautifully while dozens of vigorous shoots continue racing toward the light. Every new node appears healthy, evenly spaced and ready to become another flowering site once the transition begins. The rich emerald color tells me everything is working together exactly as intended. Sometimes the healthiest plants are the ones that simply don’t give you anything to complain about. This is one of those. ⸻ 🌿 12/12 From Seed As with every plant in this project, Purple Haze B is being grown using my favorite 12/12 From Seed method. The lighting schedule stays at 12 hours from germination until harvest, allowing the plant to naturally progress through its life without ever experiencing a traditional vegetative photoperiod. The goal isn’t maximum size. The goal is efficiency, fast turnaround, excellent quality, and discovering how each genetic expresses itself under these conditions. Every phenotype reacts differently. That’s exactly what makes this project so exciting. ⸻ 🌱 Low Stress Training (LST) This week’s training focused exclusively on Low Stress Training. Rather than cutting or removing growth, branches are gently bent and positioned to create a flatter canopy. Why? Because every branch that receives equal light has the opportunity to become a productive flowering top. LST offers several advantages: • Improves light penetration throughout the canopy. • Encourages multiple dominant tops instead of one main cola. • Creates better airflow inside dense plants. • Produces a more even canopy before flowering. • Increases the number of quality bud sites. Watching this little bush respond over the week has been incredibly satisfying. Every adjustment rewarded me with even more vigorous growth just a day or two later. ⸻ ? Why This Plant Is Staying Hand Watered Although she’s growing inside an AutoPot container, this phenotype is intentionally NOT connected to the AutoPot system yet. She will serve as the comparison plant while her sister begins receiving gravity-fed irrigation. Everything else remains identical: • Same genetics. • Same substrate. • Same nutrients. • Same environment. • Same lighting. The only real variable will be irrigation. It should make for a fascinating comparison later in the grow. ⸻ 💧 What Is an AutoPot? The AutoPot system is a completely passive irrigation system that waters plants automatically without pumps, electricity or timers. Instead, it relies on one beautifully simple principle: Gravity. A nutrient reservoir sits slightly higher than the pots, allowing nutrient solution to naturally flow toward the plants. Each pot sits inside an AutoPot tray containing a very clever device called the AquaValve. ⸻ ⚙️ The AquaValve The AquaValve is the heart of the AutoPot system. It works like a miniature mechanical valve that opens and closes entirely on its own. Here’s how it works: • The tray fills with nutrient solution. • Once the plants drink everything available, the tray becomes empty. • Only then does the AquaValve reopen. • Fresh nutrient solution enters the tray. • The cycle repeats automatically. The result is a constant wet-and-dry rhythm without electronics, pumps or programming. The roots decide when they are ready for another drink. For me, that’s one of the smartest irrigation systems ever designed. ⸻ 🌱 Current Feeding This week the girls continued receiving the Plagron Terra program: • Terra Grow – 1.8 ml/L • Power Roots – 1 ml/L • Pure Zym – 1 ml/L • Sugar Royal – 1 ml/L Solution maintained at: * EC: 1.35 * pH: 6.1 The plants continue responding with lush, healthy foliage and vigorous new growth. ⸻ 🌡️ Environment Conditions remained stable throughout the week: * 🌡️ Day temperature: 33°C * 🌙 Night temperature: 25°C * 💧 Relative humidity: 63% * 🌱 Root zone temperature: 21°C * 💦 Nutrient solution: 26°C * 🌿 CO₂: 639 ppm Even with the warmer daytime temperatures, the plants have shown excellent vigor, with no signs of nutrient stress or environmental fatigue. ⸻ 📸 Final Thoughts Purple Haze B is quickly becoming one of those plants that constantly catches my eye whenever I open the tent. She isn’t trying to be the tallest. She’s building something even more exciting—a thick, compact canopy packed with potential flowering sites. In a few weeks we’ll discover whether the hand-watered approach can keep pace with her sister running on the AutoPot system. Either way… I’m pretty sure we’re all going to learn something. And that’s exactly why we grow. ⸻ 🙏 Thank You A huge thank you to everyone making this project possible. Genetics: Zamnesia Seeds 🌱 Nutrients & Substrate: Plagron 💧 Irrigation: AutoPot 💡 Lighting: Lumniflora and Future Of Grow LEDs 📖 Grow Journal: GrowDiaries Your support allows experiments like this to happen, and I hope sharing every step helps growers around the world learn right alongside me. Growers Love and see you all next week! 🍇🌿

Each plant has been watered/fed, with a glug or two, from a 1 gallon mixture of 1tsp/gal floranova-grow (ph7). Mother plants are definitely ready for a pruning/cloning!

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Riesgos intercalados de root juice y piranha 2 ml por litro de cada producto. Ph6.0. 1 de febrero se agrega a la familia de fertilizante 1 ml por litro de agua bio grow de biobizz.

Fractal #2 - Final Review 🌿⭐ What an incredible journey with Fractal #2 from Divine Seeds! This girl went on quite the adventure - indoor start, outdoor middle, indoor finish! Harvest Results: • 100g trimmed large buds (wet weight) • 60g roughly trimmed - straight to freezer for bubble hash production • Abundant trim production - loaded with trichomes for hash! The Good: • Incredibly adaptable: Handled indoor → outdoor → indoor transitions like a champion • Indoor finish boost: Buds bulked up significantly during final indoor phase • Resin production: Excellent trichome coverage on buds AND trim - perfect for hash • Generous trim yield: Tons of sugar leaves packed with resin • Resilience: Thrived through multiple environment changes • Hash potential: Quality material for bubble production The Challenges: • Cold outdoor temperatures required bringing back inside • Multiple environment transitions (but she handled them!) A huge thank you to Divine Seed for letting me take part in the contest — my very first one! 🙏 It’s been an amazing growing experience, and I wish the best of luck to all the other participants! 🍀💚

Last 2-3 weeks of the grow period now, expecting the COP to finish up first and I’m guessing the PSS is going to push it to 10 weeks, at least I hope so, would be awesome to have a fairly nice yield from that one. It looks and smells so good just need a bit more swelling inna da buds. All looking great. However got a slight nute burn to all plants from one of the last feeds. Only very slight and it was picked up quickly. The following feed consisted of Tripple F and molasses soup, holding back all other nutes until the following feed. Problem seems to be sorted. The grow becomes a little more of a challenge day by day, the weather here is worsening meaning colder and more humid day by day, my cramped circumstances don’t help the situation either. The hum coming from my room now is also a little to loud and when everything’s running at quiet times can be Heard, when it really shouldn’t be, although I don’t have problems with that at the moment who knows who might hear it at the wrong time🙄 oh spring hurry along please.

Muy buenas mi gentee Por aquí otra semana en crecimiento con esta increíble SherbetZ V3 de Art Genetix Llevada con bioestimulantes The hype company, que dan unos resultados muy buenos. Estamos en la semana 4 para esta planta y después de la poda apical le salieron muchas más ramas y a seguido creciendo sin estrés. La dejaremos una semana más antes del último cambio de maceta y después la pasaremos a floración. Aver cómo sigue la próxima.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.