Likes
Comments
Share
Erken veg photo bitkimin son haftalarına girerken gübre oranlarımız arttırıp overdrive a başlandı. Sömeklerin daha tatmin edici şişmesini bekliyorum grow boyunca organik gübre biobizz kullanıldı yapraklar izlenerek call mag takviyesi aralarda verildi. Hps ısıgı enselerine indirilip strese sokmadan maximum değerleri almayı hedefliyorum yerim dar oldugundan dolayı topragım 10 lt ;)
Processing
Likes
10
Share
Likes
21
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 54 since time change to 12/12. Hey everyone ☺️. We are slowly getting closer to the harvest 😍. You can see that the lady sucks all her energy out of the leaves and passes it on to the flowers. The buds smell very tasty 😍. It should be ready to harvest in the next 17 - 25 days. But of course we will be observing this closely with the microscope from next week. Otherwise the tent was cleaned as usual and the humidifier refilled. I wish you a lot of fun with the update. Stay healthy and let it grow 🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
8
Share
North Thunderfuck Auto is a powerful strain, I am very happy that I had two plants so that I will be able to enjoy it even longer. Here is a quick overview of this cycle. 21/06/2022 - planting 14/09/2022 - harvest 3 weeks of vegetation 8 weeks of flowering 15 days of drying 106 g. total yield 2 North Thunderfuck Auto plants After harvesting, the plants were dried for 15 days, after which I trimmed the flowers and put them in jars to ripen. And now all that remains is to enjoy the fruits. I think I've stated almost everything I had in mind. If anyone has any questions, feel free to write. Thank you all for your support.
Processing
Likes
12
Share
@BloodBath
Follow
Everything bounced back to normal. These smoothies want a bit of nitrogen throughout veg. 90% of the time when I have an issue it’s because PH or PPM being too high. This wasn’t the case as I ran two tests on my medium and everything was fine. Once i fed them twice with some higher nitrogen levels and some kelp n algae they bounced back in a week. After the first feeding I could notice a nice green coming back into the leaves. I have not flushed once since then. I’ve been feeding a tea every two weeks instead to break up whatever’s left behind. I plan to do one more feed in a couple days and I’m gonna do a light flush with SLF and then continue feeding nutes and teas until she’s ready to be flushed towards harvest.
Likes
7
Share
Just before harvest. Pictures in about a week or 2 when product is dry and my eyes are healed (I am going to have Eye Surgery tomorror) Wettrimmed !!!! 1089 Gram !!!
Likes
5
Share
OK so I nearly kill my plants and these were stunted and bonsai like.. Only got 30grams dry weight but were not all cbd and definitely contained thc.. Not so good for what the intended use.. But it's like opium...
Likes
81
Share
This girl has exploded this week new buds whizzing off in all directions , She has just started too go cloudy but no amber as of yet , so I would say I started too flush way too early as she has now been having nothing more than water for the last two weeks but it doesn't seem too have stopped her in anyway but who knows she may have produced more bud ? But I am very happy with what she has and you would be happy for this result from a photoperiod plant , she has developed what looks like corn shooting out of every bud in all directions , looks mad I've just read it's called foxtailing and it's genetic on purple strains not light or heat stress , Looks amazing Update , Really starting too show the early flush now week 3 of nothing but clean water , she is now in full swing of eating her leaves all cloudy and about 4% amber , so it seems another week for this girl and I clearly started to flush a week early , but doesn't seem too have slowed her down
Likes
51
Share
2/22/24 - Day 108 - ok yall harvest is done! I'm exhausted! It took about 3hrs. There were a few things that I will highlight the differences. I have tons of pictures and video to go through. I'll update later...... I'm tired! 2/23/24 - Day 109 - Everything went really well yesterday. I was able to cut the harvest time from 9 hrs last time to 3 hrs this time. Here are some of the details on this. Last time I hung each branch on its own, it took forever to use the twist ties and then to hang each one. This time i used some drying nets. The only problem with the drying nets is for sure there will be one side that is going to be flat..... it's still going to smoke the same and if it saves me 5 hrs. then I'm doing that. LOL I also decided this time not to wet trim the buds before putting them up to dry. I did remove fan leaves that had 0 THC on them, but if there was a leaf sticking from a bud and it had THC on it i left it. That also saved me some time. The bud quality was better this time around, the buds are denser and more compact. I also had almost NO popcorn buds. The last grow I had 2 to 3 ounces in popcorn schwag buds. They were tasty and great but this time around every bud was a legit contender. This could be due to having more space, I used an Auto in the box this time. I thought Autos would be difficult to control in this space limited environment, but it was the exact opposite. It's just as easy if not easier to grow an Auto in this Magic Box. I think its important to note that anything I talk about here is from my own experience, I've purchased everything with my own money and no one pays me for my reviews or details. This is such a labor of LOVE for me. They day I get a job in the Cannabis industry is the day I stop working, at that point it would just be me living my dream having a BLAST! That being said if you would like this same exact experience here are the tools i have used. Growing Box: www.getleaf.co Seeds: www.Sensiseeds.com Strain: Skunk#1 Curing Bucket Controller: www.ACInfinity.com Last thing I want to share before my next update of dry weight. If you want to see even more photos and videos from my last grow (GovernMint Oasis) along with any new grows im working on you can check out my Instagram (@ChumpkillaOG). I update almost daily with new details on my grows. Ill go into more detail on how or why I did something. I have not posted about this Skunk#1 grow yet, that will be the next few weeks' worth of content. So, if you want to see a lot more documentation throughout these grows check me out @ChumpkillaOG. I would absolutely appreciate the likes, shares, and follows! 2/25/24 - Day 111 - There was no place that I saw to add the dry weight. I finished the harvest today and now it sits to cure. Final weight 364.5gams! Not quite a pound but very close! This strain came out really well, the bud quality with this strain is better than the last grow. It only gets better. See yall on the next one!
Processing
Likes
12
Share
@Shmoogs
Follow
Another week of step increases. I changed out the led light for a MH on Tuesday 10/09. I set the MH light at 200 watts 10 inches away to start with. On Wednesday I watered the girls at 6pm until slight runoff. On Thursday 10/11 I added a floor fan that oscillates to get air movement below the plants. I also increased the MH light to 300 watts and moved the light to 12 inches away from the plants. After the light increase I started to have a huge dip in humidity. I added water to the plant saucers in the tent to bring it up. Its getting better but still not where I want it. I will be monitoring this. Saturday 10/13 I turned up the light to 400watts at 7 pm and increased the light distance to 15inches. Its keeping the temp right around 80f without having to increase fans or any other adjustments. I also did the hand test and it was hot but it was warm so I believe it is in the sweet spot. I watered them again today until runoff. I can't believe the wingspan they already have. Looks like I'll be moving them to 5 gallons way sooner than I thought,
Likes
8
Share
@Flauros
Follow
This strain grew easily. Good quality weed. Strong smell and sugar buds.
Likes
1
Share
@LsdLover
Follow
29.05 Посадил в землю. Все достаточно быстро начали рост, и были чуть чуть придавлены светом. Убавил мощность на 10% от номинала. Полив очень аккуратный из-за высокой влажности. 4.06 Добавлен АКЧ по листу и под корень. 5.06 добавлен обдув вентилятором и снята теплица.
Likes
13
Share
This week the plants were not in shock when switching to a larger pot.😬 The red spider (tetranychus) is attacking my garden😠 Within 1 week, I applied compost (for rabbits). silica, aloe juice, alfalfa, moringa. Enzymes from seeds, corn kernels, green beans, and rice seeds.😈 I made a net for the tree in the hope it can go through holes (10cm-10cm). I prune the branches that I want them to spread evenly over the net👽 Thank you for watching please leave advice at the bottom yo👺
Likes
3
Share
@sellem
Follow
Week 2. Nothing much happened, was on work trip so no more pics after Day 10 :c Watered on Day 7 with 500 ml 6.0 PH 1ml/L Power Roots and 2ml/L Grow. No Training yet, that is underway in Week 3. See you around!
Likes
80
Share
March, 3rd. Like The San Fernando Valley, the Strwaberry Cough Girls are growing Vigor Topdressing Silica helped to Improve the strenght of stems and Branches. Girls showing lots of laterals , and i Stopped Training on them , because they are growing more wild after every Training Watering nearly Daily around 0.5l Feeding as they need it. Girls look extremly happy and green