Likes
Comments
Share
@coriander
Follow
Pretty simple first week! Seed took 3 nights for the taproot to pop and it was planted in its final pot on day 4. On day 6, it finally popped through the soil and on day 7 the little sprout is starting to grow up. There is a small piece of seed casing left attached. Going to leave it for a day or two. If it doesn't fall off, I'll do it myself. Thanks for stopping by! 🥦
Likes
11
Share
@MrSpunk
Follow
It has a very nice, abundant buds and a very pleasant aroma. I'm looking forward to trying it in a few weeks.
Likes
9
Share
COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
45
Share
@Reyden
Follow
Piano piano iniziano a formare resina e giorno dopo giorno riuscirò a sentire il profumo dei loro fiori 🌺 🤩..domani preparerò un bel boost con bucce di banane 🍌 ( circa 8 bucce per 10/12L di acqua ) porto quasi a ebollizione e poi lascio raffreddare fino al giorno dopo nella pentola…mi viene fuori una soluzione a circa 1500 PPM che poi diluisco ancora quanto basta…un vero aiuto per rendere i tuoi fiori dolci 🍭 e pieni di tricomi appiccicosi 😎 oltre a questo aggiungo 3ml/L di Canna Terra Flores una volta a settimana…il resto solo tanto amore 🌬️
Likes
9
Share
***** Week 5 December 20 to 26, 2020 - Days 29 to 35 from germination ***** Going into the first full week of flower/transition. She was definitely going through the start of transition last week but I left it as a veg week and will call this the first flower week. She is not 100% and will not be but she has all of the signs of being a nice girl. She grew hard to start and she can take the nutrients levels, leaf colour is very good and she has grown evenly, nothing odd with growth. You just can't make up veg time with autos as they don't stop😞 For the first four weeks I end up staying so focused on making sure the autos are happy everyday and for the full day if at all possible..........as opposed to the first four weeks of a photo and I am a lot more relaxed and feel there is time to correct anything......its all good😂😂 This girl has obviously not been happy about everything in life over the first four weeks. She was put on a riser this week to help get her closer to the light. I still don't know exactly what I have done but suspect it was a combination of things in veg to slow her down. I feel she likely wants a quite dry media so the roots can breath more........I was not "soaking" the coco with the volumes of moisture but it was wet. Possibly could have cut watering volumes in half to see. Been battling pH drift though so I have it in my thick skull to give a good runoff amount........which can lead to a "soaked" media and that my have been part of it??? I also took four large fan leaves up higher on her, early on right after the first LST and think that pissed her off as well........I knew when I did it and thought I would "roll the dice" and take them but maybe should have left them.......cant go back but at least aware of it😀 Pulled her out this week and looked closer at her to see the bottom better. Her branches are soft so silica is increasing now that we are in flower. Colour was good below and not spotting or deformities. When tying down the branches, she pulled her self right up around the ties again easily enough by the next day. At this point I just want to get all the extra leaves out of there and let the air flow so I removed a number of fan leaves on her lower half, not too crazy but enough that she felt it I am sure.......she is already stunted so screw it and help give her a chance to get more light and grow taller was my thought😁👊 Little more detail..... Dec 20/20, Day 29 - Dry out day after heavier feed yesterday. Dec 21/20, Day 30 - need to add some moisture - 1.5L watering with Magnificat @ 2ml = 200ppm and 5.7pH - more of a watering today with some CalMag added because RO water being used. Dec 22/20, Day 31 - dry out day today. - going to let her go and feed in the morning tomorrow. Dec 23/20, Day 32 - Feeding day today. Continuing with first weeks flower feed of 2ml/L. - 2L feed with Micro, Bloom, Magnifical, AstroFlower, VeloKelp, Natures Candy @ 2ml = 800ppm and 5.8pH. Dec 24/20, Day 33 - dry out day again. Still fair bit of weight in the pot compared to the other autos. - pull out tomorrow and clean up lower growth and check runoff numbers. Dec 25/20, Day 34 - 2L full feed again with the same 2ml/L feed as earlier in the week for all the autos. Added AN Rhinoskin as well for silica. - 1150ppm and 5.9pH going in.........pots were really dry and perfect pretty well. - Runoff was 1075ppm and 6.0pH.........I can live with that at week 2 flower😁😁 Dec 26/20, Day 35 - 1L full feed again. Had mixed up 12L yesterday. - Added 2ml/L of Microbial Mass and Piranha = 1200ppm and 5.9pH. - She needed her microbe allotment as we are at the start of flower. - Bacteria added to help keep some of the nutrients in the media as she finishes. - next watering is more of plain water and add Terpinator. Nice girl Sweet Seeds.......I have messed her up but learning from her.......we will get one to smile about😬😬
Likes
3
Share
@Godino
Follow
I had some problems with the plants, first of all serious shortage problems because I had not realized that they needed so much fertilizer at practically every watering. Now they seem fine, on day 21 of flowering I plan the last massive defoliation and lollipopping. I didn't even think they would stay so low and having folded them too soon proved to be difficult in the future for ordinary maintenance. Experience for the next time!
Likes
3
Share
Processing
Likes
28
Share
Days 33-35 Both ladies have been transplanted and moved into the Veg tent! If you look in the video you can see the setup. Both are in 10.5"x10.5" square nursery pots approx 3Gal each. Both were put into happy frog soil using azos and recharge during transplant. I have them under an optic 8+ with a cob as supplemental lighting Day 37: A light defoliation day today, especially for #1. I removed all the mature fan leaves that were blocking any bud sites or nodes at all. Essentially leaving the top 2 mature leaves in tact. I honestly did not want to do this! It was heart wrenching to mutilate such a beautiful naturally growing plant 🤷‍♂️ practicality wins in the end tho. I removed the 2 oldest lowest fan leaves from #2 as well. More for sanitation reasons. They werent8blocking anything but the uh were dragging in the dirt and starting to fade anyhow. I actually kept 1 leaf. My 1st time ever doing this. The leaf is so neat, overlapping itself. *transplant update day 37* In my very green opinion they look to be struggling a bit with the transplant. I like to wet my medium prior to placing the rootball in, sometimes it's great and the roots chase it. Sometimes they get a little water logged and it takes a week b4 watering. I'm thinking it's the latter in this scenario. Day 38; #1's top fan leaves are rolling in again. I figured it was heat but the surface area doesn't get above 78° which from what I've read is fine. Maybe it's a strain issue? Looks very imdica, ma uh be is accustomed to a cooler climate? Day 39: I lowered #1 about a foot further from the light. She is still all curled up tho. It isn't heat. I watered them at transplant per my usual routine. 2 other plants stranded extremely bad and these 2 are acting goofy. I probably over did it that day Day 42 and 43 In day 42 CMOG #1 needed some water. It's her 1st drink since transplant. #2 on the other hand is drinking a bit less. I also took 2 upper fan leaves off #1(I hate doing it, but gotta promote those bud sites!! Day 43nothing really to report. I videotaped myself plucking a couple lower fan leaves. I'm raising the fan a bit more above #2 to keep wind stress down. Day 44: 🚨⛈️Emergency!!⛈️🚨 Power is out! My light cycle is as follows: on at 6pm off at 12pm. Its 2:45am right now and the power has gone out. Which was wierd because it went out b4 the storm hit! It was fricken midday when the outtage happen!! My poor Chocolate Mint OG 😖 keeping humididty down is gonna be hard and my grow is very far from and natural light source even if they were on the same cycle as nature 🤷‍♂️🤦‍♂️ if ur reading this say a quick prayer! Thanks!!🙏✌️🌱
Likes
14
Share
Got a big cal mag deficiency problem at the end of week 6. I’m treating her now with cal mag
Likes
16
Share
Week six I’ve been watering when dry and I bumped the nutrients up a bit. I started to prune some of the lower fan leaves to help with the bud growth. Everything looks to be going well with Billy by Mandy still seems to be pretty small.
Likes
9
Share
@Vega0284
Follow
Had a hell of a week with Blue Dream 2. In the previous week I had added some molasses to the nutrient solution, 2 of the 3 plants took very well to it. However Blue Dream 2 got a real bad case of root rot. I ended up having to trim up the roots, and do a hard rinse on them. I flushed a bit with Hydrogen Peroxide and then let it soak in a resevoir with nothing but hydroguard for 36 hours. The other two had a small outbreak, but nothing near Blue Dreams 2. All in all a few days later she has recovered. Thats the biggest reason I added the tomato cages, blue dream 2, with weak stems already (got to find a silica supplement next run) she couldn't hold up the buds. After she recovered I just put the cages around all 3. I want to say 2 more weeks, but am still super green to all this, I'll post pics of the buds and tell me what you guys think. Cheers
Likes
3
Share
slow start for the gorilla glue family (gorilla glue auto and the strawberry glue), the wedding cake from Barneys farms started surprisingly flowering after 3 weeks! :D The wedding and all others needed a lot of defoliating but now the wedding has slowed the growth on the leaves and focussed on stretching for some nice strength to the dense buds its growing :D Every other day the strawberry and gorilla need defoliating to stop the bud sites being covered.
Likes
16
Share
Very good looking just transplanted into final 9l airpot and looking happy
Likes
2
Share
Babys getting lollipopped .
Processing
Likes
3
Share
She looks absolutely awesome, has come stronger since the supercroping technique,she got the branches up again,and now she's more open and can get a bigger light penetration in all the bud sites,let's see how this wonderful lady performs,the aroma it's not too strong yet and the resin production is not too much either but smells very sweet,let's see how she performs! 💚🌱✌️💎
Likes
3
Share
@Xabii
Follow
Had to do a root wash, again, also cut some really bad roots of, also saw lots of new healthy root growths since last week, upping ORP and wash last week seemed to have helped. Overall still very unhappy but that is on me, learned that prepping a plant in DWC and then transplant it to NFT is not a good idea, better do it as usual directly in NFT so that the roots follow the stream better, usually at this time there would be at least 3x the amount of roots. Also switched back to the 10cm diameter tube, will stick with that one from now on, very good experiences in the past and this one does not, maybe RH does not rise enough in a 16cm diameter tube. Also changed the light cycle to 18/6 from 24/0, in the timelapse I see phases where the leafs droop slightly and come back, kind of like the night cycle but less, seems to me like the plant wants to go to "sleep" even tough it was raised in 24/0 and I have good experiences with 18/6. Values are average of the day. DATE - EC(us/cm) 20250430 1952 20250501 1649 20250502 1722 20250503 1735 20250504 1719 20250505 1750 20250506 1796 DATE - PH 20250430 6.03 20250501 6.24 20250502 6.27 20250503 6.24 20250504 6.21 20250505 6.15 20250506 6.13 DATE - ORP (mV) 20250430 259 20250501 248 20250502 225 20250503 233 20250504 222 20250505 235 20250506 307 DATE - °C - RH% (Tent Temp/RH) 20250430 25.9 42 20250501 25.4 47 20250502 26.6 48 20250503 24.2 51 20250504 23.7 46 20250505 24.5 45 20250506 24.0 47 DATE - °C (Reservoir) 20250430 20.4 20250501 20.4 20250502 21.7 20250503 21.1 20250504 19.5 20250505 19.3 20250506 19.6 DATE - CF 20250430 19.52 20250501 16.49 20250502 17.22 20250503 17.35 20250504 17.19 20250505 17.50 20250506 17.96
Likes
14
Share
@Quintall
Follow
Die erste Woche ist da die Pfalze in der Mitte hat leider ihren Samen erst recht spät abgeworfen. Deswegen glaube ich das die bisschen gespargelt hat. Die Pflnazen schlucken langsam immer mehr Wasser. Sie fangen sehr leicht an zu riechen. Luftfeuchtigkeit immer zwischen 60-70 % Temperatur 20-25 grad