👉 I started the week thinking I would be harvesting a branch or two a day. I planned on starting at the top with the Queen and just work my way down a little at a time every day or so. This was to allow the lower levels of branches more time to mature to get an even result from top to bottom as far as bud 'ripeness'. 👉So I did start with the Queen. The trichomes looked perfect for what I wanted, mostly cloudy. This Queen cola was not 'typical' when compared to most Auto flower plants Ive grown. It wasnt even the highest of the colas on the plant. It was about the size of a pine cone and frosty. I did a close trim in it and hung it on my drying rack to dry. After one day the cola was placed in a paper bag and hung until its weight was 25% of the original wet weight after trimming. That took two more days and last night it was placed into a jar with a hygrometer. 12 hrs later the hygrometer was at 91% so I opened the jar lid. I will leave the lid open probably all day, may even take the bud out of a while and put on the hanger. It will repeat the process till stable at 62%. 👉 What I found at trimming was that perhaps the flower could possibly pump up a little more. Also it has so many leaves it made me start to hate leaves. I that made me conflicted because leaves are why everything happens...food factories. I could see the issue before I got close to harvesting and I am happy I didn't go on a massive defoliation campaign. That wouldn't have helped the sugar leave issue. I have been taking leaves for a few weeks now even though it may be hardly noticeable. It took a long time to do the type of trim I like. I avoid snipping calyx's as much as possible and will snip as many sugar leaves as close as I can. The rest of the harvest of this plant is going to be penance for just a few of the thoughtless or stupid things Ive done in the past...a trim purgatory that is going to be close to trim hell. But if the end result is as good as the white widow Ive had in the past, it will be pain worth enduring...if its a dud that tastes like grass because of all the leaves then I will learn how to make extracts. Almost always a bright side with cannabis. 👉So I will continue lots of pre-trimming any large sugar leaves on colas around the top and work my way to the bottom. I will also continue nutrient laden fertigations and get a little more plumpness of the flowers to offset the leaves. The plant is still thirsty and I see new calyx's on all the buds. I'm going to mix my nutrients between the late bloom mix and the ripen mix, with extra Flora Bloom, and extra KoolBloom.

On day 1 I transplanted 2 BB clones into 3 gal smart pots with coco coir. I watered them in with veg formula and set up my blumat watering system with week 1 flower nutes. I raised PPFD to 600-700. On day 2 the reservoirs PH was adjusted from 6.4 to 6.0. The rez is 823 ppm. The tops are 16.5" from the grow light. The blumats have not started watering yet and I will monitor to ensure it goes smoothly. I have the blumats set at 1.25 carrots on left plant and 1 carrot on right plant. The average PPFD of my 16 tops is 703 PPFD. I increased temps to 85 day 81 night to get leaf surface around 80 f during day. On day 3 the reservoirs PH is 6.2. The rez is 782 ppm. The blumats have started watering and I will monitor closely over the next few days. On day 4 the reservoirs PH was adjusted from 6.3 to 6.1. The rez is 717ppm. On day 5 the reservoirs PH is steady at 6.1. The rez is 706 ppm. The highest top is 15.25" from the light. I defoliated to bring in more air and light to deeper into the canopy. I increased the flow rate of blumat by .5 carrot on the right plant as it was a little to dry for my liking. The Clones are preforming well. On day 6 the reservoir PH is going down so I adjusted up from 6.0 to 6.2. The rez is 730 ppm. The highest cola is 14.75" from the light. The left plant had a runaway so I reduced blumat by 1 carrot. I increased flow of blumat on right plant by .5 carrot as it is still drier than I would like. On day 7 the reservoirs PH was adjusted from 6.3 to 6.0. The highest cola is 14.25". I reset rez with nutes.

Questa è l’ultima settimana. Faccio fino alla 10 con il flush e dopo taglio

oh boy these girls just love to stretch a lot! They have doubled their height in just one week. It's the sativa genes in this baby! I love this one outside where you can let her go wild!

I don't know where to start and I must admit I'm completely overwhelmed by this beautiful beautiful plant ❤️❤️❤️ Aaaaaaaaaaaaaaaaaaaaaaaaaaah, I'm so happy 😍😍😍 She is a blessing! Excuse the outburst, but she is magical ☀️ I applaud you guys at Humboldt for creating such a wonderful strain 🙌 Some details upfront, before I rave some more: - 134 Days in total: 70 Days in Veg, 64 Days in Flower with 128W LED in a 60x60x160cm tent - 7 Days Drying regularly, 9 Days Drying in the Fridge - 432g - Wet weight with stems - 103g of those for Fresh Harvest Infused Oil - 190ml Olive oil with 30mg/ml THC & CBD - approx. 20g dry (for dry weight calc.) - 87g for the DrZiggy's Low And Slow Drying in the fridge - 20g dry - 242g for regular Drying @50% RH and 22°C - 55g dry - 30g dried sticky trim in the freezer Summary of my growing experience with this strain: She takes well to massive training and a little neglect in the beginning, meaning she recovers well, which is what I want 😊 I didn't experience any major deficiencies. She had a little nitrogen deficiency during the later veg phase, which she showed with lighter green leaves. I blame this on my long veg time and my pot size of only 11l. She consumed all her soil and nutes by the end of veg. I will keep that in mind for my next grow. Since I increased my nitrogen levels so close to flowering phase, I overdid it a little on the nitrogen which showed a little bit during later flowering phase with downwards clawing leaves. So I will be more careful with nitrogen especially while transitioning into Flower. I did not flush this plant and she smokes already beautifully mild after only a couple of days of curing. Drying her took 7 days in the tent and 9 days in the fridge. She crusted up with lots of stickiness while drying and gave off a good bit of scissor hash & kief when trimming. Smoking her is a great and different experience to me. It's my first time with a 1:1 strain and I can definitely notice the CBD content. She shows in a very well balanced body high with a slight and gentle knock on the THC door. The first couple of days I felt a craving for higher THC which settled down after only a couple of days. Very interesting and definitely worth growing. So you guessed right, I totally recommend growing this beauty. Especially if you are interested in exploring a 1:1 THC:CBD strain with all its magical medicinal values 🙏 Why I grew this strain: Like @Experimentgreen on here, I grew this strain for my Mama ❤️ She is open minded to trying to solve some of her health issues with these beautiful plants and the magic they bring but she also likes to have a bit of fun, she doesn't mind. So a 1:1 strain was quite handy. She suffers from neuropathic pain, arthritis in her joints, restless legs and insomnia. All very relatable issues and perfectly suitable to be introduced to some good CBD and THC content. She already has a little tolerance, since she is treating her restless legs with gummi bears I made with a strength of 1.5mg/gummi bear. This small dose already helps her on a daily for her restless legs. Beautiful 😍 So with this special mission in mind, I wanted to process the plant with only the very best options and create Cannabis Oil (Capsules) for my Mom to take. I chose a method called "Fresh Harvest Infused Cannabis oil" by the wonderful member SweetSue over at 420magazine: https://www.420magazine.com/community/threads/fresh-harvest-infused-cannabis-oil.363371/ I hope it's ok to relink, no need to duplicate already existing and well researched content, right? I will not go into detail and def. recommend reading through the whole thread. I only document the short version here, but feel free to ask me, I'm happy to share my experience. The oil I made has 30mg/ml of THC and CBD. That's a good value. I calculated the strength the following: 75g fresh Flower in 200ml Olive Oil - with 10% CBD&THC 85% extraction efficiency with the infusion method 85% * 10% THC&CBD = 0.0850 0.0850 * 75g = 6.375 gram of available THC & CBD 6.375gram * 1000 = 6375mg/THC 6375mg/CBD 6375mg/200ml = 31.875mg/ml CBD & THC I created capsules with 3mg per capsule. We are currently trying to find the right dose for her. She started taking one capsule 60-90min before bed for 3 days now and will increase by 1 capsule tonight. We continue until a max dose of 15mg/day but always re-evaluate how she feels. She's documenting her experience quite cute. Very heartwarming and powerful. So far she sleeps better and she falls asleep faster, which she hadn't done in a long while. Onset is pretty precisely between 60 and 90 minutes. She has not had any restless legs so far. I'm excited for her and can't wait to see where this takes us. I also made her a salve/creme she uses as a topical on her joints. When she uses it early enough, before the big pain hits, she feels it helps. Of course this is not a science study and everything is purely based on personal experience. I thought I share, in case anyone is interested, also I want to give back a little, since I consume so much knowledge from all over the internet, including here, so thanks 🙏

Week 7 over and I'm entering the final week of flower it's super hot round here atm so I've had some high temps in the tent as yous can probably see. The plants all look promising some look top notch the feed is doing its thing you can't wrong with Ton o Bud 😉 highly recommended 👍. See yous next week for the week 8 update then time for the flush and get these dried out. Thanks to my followers and sponsors really appreciate all your help 🙏👍❤️. @Anesiaseeds @divineseeds @HydroproWashington Peace out and happy growing.

Day29F - still showing vast growth on buds, swelling and trichomes blossoming out. The colours starting to form nicely on the buds. Smells like a pungent caramel now. Day32F - This plant is so thick and strong, and can resist a dry and hot climate. For me this plant has been so easy, and she sucks up nutrients and loves it, 💪 Buds are getting dense and so sweet to smell. So fat and so many, I'm surprised on this auto 👏 well done again RQS. Day 68- Day 33F - the buds continue to swell and devolope. Trichomes flooding through now. Starting to see cloudy so will push for another week of nutes if she'll allow it after Friday, we'll see 😏✌️💚

The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are topdressed @ ml/gallon of soil. Day 1 We missed the scattered showers but it's been 80-90% humidity all day. It's been real sunny but the pots are very wet. Day 2 we had sunshine and temperatures above 80° F. The soil dried out a little today. 🙏 Day 3 we have clear skies and temperatures hitting mid 80's F. Pots dried out enough that I watered 1.5-2 gallons from the hose. Well water is 7.6 pH and 50°F. Day 4 we had thunderstorms and rain in the morning. There was lots of sunshine that afternoon, then rain and severe thunderstorm overnight. Day 5 we had lots of sunshine, temps in the mid 80's and thunderstorms and rain in the evening. The thunderstorms became severe overnight. Day 6 we had rain in the morning followed by rain and thunderstorms intermittently into the night. Day 7 we had rains early morning and then cloudy most of the day. We have sunshine in the forecast for next week. 🙏🙏🙏. This week was a very wet success. The plants doubled in height and began to grow their side branches. The rain has been constant and nearly eliminating the need to water. It's a concern to have constant rain and high humidity. I've seen fungus gnats but these plants haven't shown any signs of stress. Once again fastbuds can thrive in a challenging environment.

Just finished 10 days of flush. 2 days in the dark with no water and theses ladies are coming down. Very pleased with the results. Everything looks as it should

Trainwreck is doing amazing, super nice shape, defoliation worked the way it should. This one will make a super nice shape, the lower branches caught up with the top and we are ready for flower. Living soil, no feeding, happy plant !

420FASTBUDS FBT2104 WEEK 3 These beauties seem to be on the fasttrack to greatness. So far they have shown absolutely zero signs of issues and no signs of nute burn. I'm starting to brew a molasses tea to give them a nice feeding in a couple days after the teas aerated with a little frothy on top. The temps & humidity I dropped into the mid 70's and 30% and the plants seem to enjoy those ranges. Happy Growing

🌱 Day 50 - First Day of Week 8 🌱 Hello, Grow Friends! My plant is doing well, and it’s amazing to see visible progress every few hours. 🌱✨ The buds are in full throttle, and I feel like the plant is now needing more water as the pots are drying out faster. 💧 Watering: I’m still watering with 1L every two days. 💦 The dosage of BioBizz Grow and BioBizz Bloom has been increased according to the BioBizz feeding schedule. The pH of the water remains constant at 6.0. ⚖️💧 Temperature & Humidity: Luckily, the weather in Germany is cooling down, so I no longer have to deal with temperatures of up to 30°C in the tent. 🌡️🍂 I’m expecting temperatures to settle between 18-23°C now that we’re in September, and humidity should stabilize around 50-55%. This will create perfect conditions for the upcoming drying process. 🍃✨ Plant Health: The plant is looking good overall. 🌿 I did have some calcium and magnesium deficiency symptoms recently, but I’ve managed to get that under control with CalMag. 💪 I’m continuing to carefully remove any leaves that are noticeably blocking light to the buds and hindering photosynthesis. 🍃✂️ Vibes: Every day, my plant still enjoys an hour of Lo-fi Jazz music. 🎶🌱 I think it helps set the perfect growing atmosphere. 🎷 🌱 Day 56 - Last Day of Week 8 🌱 Final Feeding: Today marks the last day of the fourth flowering week and the last day I’ll be feeding the plant. 🌿💧 From now on, the plant will receive only water for the final 14 days to flush out the remaining nutrients from the soil. 🚿 As a beginner, I’m unsure if two weeks without nutrients will be enough for the plant to finish properly. There’s a part of me that worries about potentially wasting its full potential by skipping nutrient periods. 🤔🌱 However, I’ve decided to stick with the plan—after 14 days of just water, I’ll harvest the plant. ✂️🍃 Humidity & Temperature: This week, the weather has cooled down significantly, and I no longer have to struggle with high temperatures. 🌡️🍂 The temperature ranges from 19-23°C during the day, and humidity sits between 49-56%. I think these are ideal conditions to bring out the purple hues in the buds. 🍇✨ Defoliation & Plant Care: I’ve finished the final defoliation and trimming of the plant this week. 🍃✂️ From now until harvest, I’ll avoid making any more changes or interventions, as I want to keep the plant stress-free and allow the bud production to progress smoothly. 🌱💪 Trichome Observation: As a beginner, I’ve started checking the trichomes this week, but I’m finding it challenging to distinguish between clear and milky trichomes. 🔍💎 I plan to harvest when I see 90% milky and 10% amber trichomes. 🌿✨ I’ll keep you all updated next week, and don’t forget—there are new pictures every day! 📸🌱

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.

Got everything moved around & the new carbon filter, fans & lights so hopefully I got better coverage with less power👍🏼 Topped 1 of the Gelato OGs today was getting way taller than the rest we will see how she bounces back! Everything else seems to be going great! Day 22 topped & trimmed them up a bit Day 23 started LST on a few Day 24 started mainline on one of the GZ Day 25 trimmed them a little more today

Day 57: Added one gallon of pH 6.5 water with nutrients. Day 58: Used super cropping (hope I'm saying that right) on the tallest branch to make the canopy more even. Day 59: I am not watering enough. Day 61: Sadness. I was attempting supercropping and snapped the stem of what I thought would become my largest cola. I have taped it but now feel I've topped my auto.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ Happy fools day 😺 It's been a great week! Its hard to believe we're 6 down already. These buds are insanely frosty, I can only imagine how they'll look in a few more weeks..despite how they appear on video the leaves are very dark, too dark actually and some are glossy..no burnt tips but these girls are definitely overfed..we decided it's a good time to cut nutrients anyway, they'll get water only for the rest of the grow. This strain smells amazing, very sweet..I'm really looking forward to trying it! We made sure to grab plenty of clones (all of which are now in veg 🤘🐱) It has been a very easy grow to this point, the MarsHydro is just crushing it, it's 300watt but neither of our 315watt CMH fixtures come close..this is our 2nd grow using the SP-3000 and both times have resulted in massive and extremely resinous buds..we're eventually getting another, I think 2 SP-3000s in our 4x4 would drastically improve yields, reduce temps and our gnarly power bill lol ..we'll probably update midweek how the flush is going, thanks as always for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Ladies look to be comfortable, roots are growing, leaves are spreading and look good. I overwatered them a bit but they ate that all up, next week I'll transplanting them as they've overgrown this cup quick. One of them is growing upwards much faster than the others, will have to keep an eye on that one. First pictures are from beginning of the week and the last ones last day of the week.

Another 20L dechlorified tap water reservoir change on the 19th. Flowering stretch looks to be finally over - and I'm glad, because I've got no more vertical space left. Can barely believe these have been topped, they're by far the biggest plants I ever grew (not that I have grown many to be honest lol) Did a good defoliation session on the 22nd, but that was before the pics and video. RH went down from around 70%+ to a controlled 64%. Temps are super high at the tent, but the girls look to be handling that very well. We'll see.