Likes
Comments
Share
2nd week flushing, watching trichomes with a 60X loupe waiting for a few amber. One plant was chopped last night and hung...patiently waiting for the others😑 Well I decided to take Roberts suggestion and try 2 days of total darkness (thanks) before chopping down the rest. Removed the fan leaves and chopped the ladies down 😇hung them to dry in a dark room with indirect air movement. RH 55% at 20C for 3 days then RH 50% at 18C for a couple of weeks, then mason jars and then lastly 62%Boveda. Will update with dry weight and smoke report😎 Thanks for your comments and suggestions
Likes
39
Share
March, 19th Second Week of Vegetation breaks Seedlings have established, hardest Part is done She gets sprayed daily with "Fast Plants Spray", and water with beneficals if she needs it Smooth running I was setting up this Tent new and they got a new Light too. Iam very happy with the Light Its a bright, good quality Quantumboard The corpus is built solid, and has cooling fins, so the Board and the Tent stays quite cool No issues It runs on 60 Percent The Light was released on March, 15th. here are some codes Amazon US: XS1000 10% off: it10mlarimar http://yx-8.cn/0y-6 XS1500 5% off: it15mlarimar http://yx-8.cn/0yA XS2000 5% off: it20mlarimar http://yx-8.cn/0y2Y XS4000 5% off: it40mlarimar http://yx-8.cn/0y5k Amazon Canada XS1000 10% off: it10mlarimar https://amzn.to/38udUVe XS1500 5% off: it15mlarimar https://amzn.to/3esVUyr XS2000 5% off: it20mlarimar https://amzn.to/3l5zAfg XS4000 5% off: it40mlarimar https://amzn.to/3l7k5Uj
Likes
87
Share
At the start of week 10 she is on point and on scedule going to up her nutes during the course of the flowerstretch So when stretch is over she is at full strenght nutes and adjusted nicely....🙏❤️ Day 64:Some clean up and transplant in her final 10L bucket Spiderfarmer SF1000 specifics: Chips Brand: SAMSUNG Veg Footprint: 3 x 3 ft ,Flower Footprint: 2 x 2 ft Spectrum: 660nm,3000K,5000K and IR 760nm Frequency: 50-60HZ Amp: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Draw power: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Lumen: 16439Lm±5%@AC120V, 16327Lm±5%@AC240V, 16292Lm±5%@AC277V I'm so pleased with this product i am placing the order link: https://www.aliexpress.com/item/4000171217867.html
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds start to bump and frosty, more and more, leaves turn to purple 💜 I start to check the trichromes, Harvest in 1 or 2 weeks I think 🤔 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Roots + Ez plus 1.5 l Water + Roots + Bloom + Sugar Royal PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 45 cm. Mars Hydro Fan kit Setting 8, smeel a bit out Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
10
Share
This week had to do a lot of leaf striping. shit was heavy but had to do it.. so hope she bounces back nicely anyway cannacrew 42088 peace ✌️
Likes
39
Share
Fue una semana tranquila, viendo como poco a poco siguen creciendo y engordando esas flores, nevándose de a poco más y más gracias a Top Candy de Top Crop. Se cortaron las últimas hojas para despejar por completo su parte inferior y fuese aún más fácil el riego. Se sigue ... Va quedando menos ... 👽👽👽
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
6
Share
@shrubluv
Follow
Unfortunately, once again (last grow too) I had some bud rot in the last week before harvest in both plants with the biggest one largely affected. Because of that, I had to remove all infected parts and have an early harvest. I picked out all fucked buds, gave my plants another two days of (finally!) sunshine to dry out the cut-outs I did on the plants. Today I harvested the smaller one and was surprised it actually was quite alright in terms of yield. Tomorrow, I'll cut the big one and I hope there will still be some good bud structures left as this one grew so nice, especially for being a dwarf :-D Will update as soon as I've got more news! UPDATE: I cut the big one as well and am very pleased with the yield I have from this grow. Was not an easy grow since the weather was shit and I've had to throw away some decent buds because of bud rot, but all in all it looks promising :-) DRY WEIGHT: 48g of fresh buds (had to throw away at least what could have been 10-15 grams because of bud rot)
Likes
33
Share
@AshBrand
Follow
3/25/21 - Today I fed with a little bit of Big Bloom. They really seem to respond well to it. 3/26/21 - They look great! No feeding today. I removed the humidity dome today. We are transplanting into the grow closet on 4/01/21. They will be in the grow closet until harvest under LED. 3/27/21 - Autopilot today. No feeding. I’ll feed tomorrow with more Big Bloom. They could be transplanted today but we are going to run the rest of this week. 3/28/21 - Fed with Big Bloom. All plants have roots coming out of the bottom of the cups. We’ll be moving them to 5 gallon fabric pots in a few days. 3/29/21 - No water today. They all look good. Transplant day is coming! 3/30/21 - I put some water in the tray so the plants could get water if needed. I don’t think they need any water today. 3/31/21 - I gave each plant a small feeding of Big Bloom. Tomorrow they will be transplanted into 5 gallon fabric pots of Fox Farm Ocean Forest and be given water for at least 2 weeks. See ya on week 4!
Likes
7
Share
3rd week in flower and shes gone mad was told that it wouldnt get too big but someones lieing lol its almost 4ft tall might repot her because i dont think a 5ltr pot is big enough let me know what you guys think all info greatly appreciated peace growmies 💯💪👍😋
Likes
17
Share
@JonnyKush
Follow
hey guys sorry for the absence but in this period I have had a lot to do with my work and I have not been able to bring a good detailed diary, but finally now the holidays will start and I will be able to dedicate myself 110% to a new crop and new ones diaries. having said that, I think I will leave him a week at the most and finally reap the benefits 💚🌳💚🌳maybe my fault the RQS slow release nutrients did not perform as much as the ADVs in my tent, you can see it from the video of 27/07/22 where you can see that 2 out of 6 plants are visually leaner and less compact to the touch , I wanted to try on the same varieties in order to have feedback. I think it could also be caused by the crowding of the tent but with the ADV I have not encountered any problems. I will definitely try them again, giving them much more attention.
Likes
9
Share
@Scilef
Follow
Week overview: Starting this week I will feed my lady with week 2 AN nutrients from the table (without the base solutions). I will check income ppm level and outcome ppm and pH levels to find a point when to begin feeding process (adding the base to the mixture). Also, since night 1 I changed my light panel settings and set it up to a 50% of power (enlarged lamp to plant distance to 60 cm) --------- Daily reports: • Day 1: Watered at night with a 91 ppm solution (6 pH) in and 911 ppm (5.9 pH) out. Prepared coco contain 0.2 g/kg of nutrients so it will take some time for the plant to consume them. • Day 2: In - 6.0 pH 104 ppm; Out - ??? (1l is not enough to have a flush) • Day 3: In - 6.0 pH 99 ppm; Out - 6.0 pH 741 ppm (2l looks perfect to get a drain. Nutrients from coco soon will run out based on out ppm level in dynamic) • Day 4: In - 6.0 pH 94 ppm; Out - 6.1 pH 774 ppm (2l now looks too much, I got 1l of drainage and it is more than enough) • Day 5: In - 6.2 pH 74 ppm; Out - 6.2 pH 889 ppm (I accidentally mixed 1.5l instead of 1l. That's why pH is so big this time. And still, I have a half drain back, so 1l should be just fine) • Day 6: In - 6.0 pH 94 ppm; Out - 6.3 pH 867 ppm • Day 7: In - 5.8 pH 99 ppm; Out - 6.3 pH 931 ppm (why does out pH and ppm grow? Is it bad or good?) --------- Plant Height delta: day 1 - 5.1 cm; day 7 - 7 cm.
Likes
27
Share
Day 58 FLOWER and this girls keep surprising me every day, they keep on getting bigger 🤷‍♂️🙌💚💚💚 the trichomes and smell department is doing the same 😂 they are definitely showing me the reason why i have to always make clones 🤦‍♂️🤦‍♂️🤦‍♂️ my bad 😆💚💚💚 As always thanks guys for checking and reading my diaries, I truly appreciate the love and it all 💚💚💚🙏🙏🙏 growers love and keep on groweing 💨💨💨💚💚💚 PPFD - 1000 Umol/m2 DLI - 40.0 mol/m2d VPD - 1.72 kPa Girls: Gelato OG @Seedsman Light Lumatek Zeus 465W compact pro at 100% More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg All i grow is medecine for myself, nothing to sell, dont even ask !!!! Stay safe and do it with love for the love ❤️ 🙏 💚Growers Love to you all 💚
Processing
Likes
27
Share
@Hawkbo
Follow
Sorry for the delay was in a wedding this weekend came home and been trimmin like a dog the past few days and didnt have time to do the update but I'll do another one before tuesday to get back on track. As of Friday sept 6 its day 46. In the video the plants from back left to right are .. Gelato-> Cream Cookies -> Gelato Middle row from left to right are Lemon A.K 1 -> 6 Shooter-> Lemon A.K Front is Tester 5 -> Lemon A.K -> Tester 26
Likes
6
Share
@Bncgrower
Follow
Good evening, a little late but updating... this girl is more compact, but the buds are extremely resinous and fragrant as the last weeks approach... Otherwise everything is as expected. Happy growing! 🌱🌱
Likes
43
Share
Now that V started, both ladies have began flush. Nemo actually started early last week since (20 ml heavy 16 finish and 1 gallon of RO watrr per feed). Nemo on left, a little less directly under the light is more developed, both bud structurely and trichome color (clear transitioning to cloudy or milky trichs more each day). V on the right side is much less finished, being a more haze influenced pheno. it seem lankier and slower to finish, however severe light stress from being grown up to close to light has bleached maybe 6-10 tops of the 15 tops on v. nemo will be done sometime later this week or early next week. Going to harvest the tops entire plant on nemo, then rewaeave V back thru the scrog to allow greater distance to light and better airflow for it to fill in a little more and finish up over next 2 weeks or so. will be closely monitoring bud sites in top colas to harvest when trichomes are almost fully milky white, just before amber.