I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!

Very happy with the result. Very strong and high quality with great bag appeal.

Dear diary, Week 3 done! Was away for the end of the week so hence why there are not as many photos this week, but my flatmate was keeping up with the feeding during my absence. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 18: Gave another foliar of calmag, and gave a watering of calmag water at 1.35ms 6.3ph and backed off a bit on the light to 290ppfd as I’m seeing some signs of light stress. I also later feed nutes at 1.35ms 5.8ph. ⏰ Day 19: I am seeing some more “burning” on the new growth tips so I feel happy about the choice to back off on the EC and lights. A feeding was given at 1.35ms 5.5ph and light lowered a bit more to 250ppfd. ⏰ Day 20: The regular feeding was dropped again slightly to 1.26ms and 5.6ph and light increased to 270 ppfd. ⏰ Day 21: Feeding given of 1.26ms 5.6ph. All of them look fairly okey, but W.C #1 undergrowth is slower than the rest but raised lights to 52cm and set ppfd to 300-305. ⏰ Day 22: Away from home so the flatmate is feeding them from the premixed bucket. ⏰ Day 23: Away from home so the flatmate is feeding them from the premixed bucket. ⏰ Day 24: Away from home so the flatmate is feeding them from the premixed bucket.

Sanlight evo at 100% Day 64: watered today with supplements. Getting high humidity levels, so I sprayed purolyt. Will propably flush in a couple of days. Day 68: flushed yesterday. One week now and then 72 hours of darkness. Looks and smells really good🤙 Get 15% Off Fast Buds with Code: FBSUMO https://2fast4buds.com/

Hello growmies 👩‍🌾👨‍🌾🌲🌲, Let's go for one more try PS5 contest from @Fast_Buds 🔥 The seeds come from a win of Diary of the month, didn't remember wich 🤔. Thanks to @marshydrococo2 and Mars Hydro Lighting for the FC 3000 and 6 inch fan kit 🔥🔥💕💕. Day 0 I've put the seed in paper towel. Paper towel + water + seedbooster 7 drop for 1l. Day 01 Seed popped in 24h, 3/3, fast for seed stored since several months. I'll keep only the 2 best seeds, the third will go to friend home Day 02 Put seeds in plug Day 03 #1 and #2 come out of soil Day 04 #1 and #2 Leaves opened Day 05 Looking good, keeping wet soil Day 06 Looking good, keeping wet soil Day 07 Looking good, keeping wet soil Seeding box Temperature around 26*C 7w led 24/24 Humidity 85-90% 💦 I vaporise the plug with water + roots PH @6 I'll prepare soil and put in 2 liter pot and under light the next week . Wish me good luck 🤞🤞 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering

Girls are healthy and juicy,getting ready for the light switching,changing pots and also some defo probably 💚🌱

I stopped giving them Bio Grow since the harvest is near.. I cut some yellow leaves and they all look beautiful :) Can't wait until harvest :D

Burnt the tops of a few colas cut them off now just hope for the best this heat is a killa to control the environment need new lights I think it’s about time I switch it up to led

This week consists of July 2, 2022 thru July 8, 2022 - Seeds were planted on May 27th, 2022 and they all sprouted on May 31st, 2022 (~4 days) Beginning of flower so I changed the light to use the HPS bulb. Maintaining temp and humidity during flower with lower temperatures and a higher VPD has been a bit challenging because of the outside temperature but it went ok. I will start to lower the AC unit temperature during dark period to get a larger difference but it makes it hard to keep the CO2 levels high with the AC unit on more often. The plants are using up a lot more water now so I have increased the feeding/water frequency to at least every other day. LIGHTS: I'm running the lights on an 18-6 schedule. I have the dark time scheduled from 11am to 5pm since the lights increase temperature and during that time the outside temperature is at its highest so it seems to be easier to maintain proper temperature ranges with the light off during that period. Swapped out the metal halide bulb to the high pressure sodium on July 6th since the plants have been in flower. WATER: July 3rd: ~750 - 1000 ml of 6.1 PH and 880 PPM. 15 ml/gal of Big Bloom 10 ml/gal of Grow Big 5 ml/gal of Tiger Bloom 5 ml/gal of Cal-Mag July 6th: ~1000 ml of 6.1 PH and 1120 PPM. 20 ml/gal of Big Bloom 15 ml/gal of Grow Big 10 ml/gal of Tiger Bloom 5 ml/gal of Cal-Mag July 7th: ~1000 ml of 6.1 PH - oxygenated water TEMP/HUMIDITY: A max of 84.8F and a min of 71.4F with an average of 79.7. VPD was pretty consistently in a tighter range with the average being around 1.41. Whole week numbers> Temp - 79.7F avg - 71.4F min - 84.8F max Humidity - 59.4% avg - 32.0% min - 81% max VPD - 1.41 avg - 0.53 min - 2.55 max CO2: Floating ball is between .5 and 1. This lets a more gradual amount of CO2 to enter the tent and I now get a more stable level of CO2 that fluctuates between around 1000 ppm and 1300 ppm. The regulator is still plugged into the same outlet as the lights so it turns off on the same light/dark schedule. PAR: PPFD between 300-1100. I got a legitimate par meter and now have a much better idea of how much light is being received on each plant. The tops of some plants are getting the 700-1100 range and some side leaves are getting in the 400-500 range. The new bulb gives off a lot of light and the plants have grown much closer to the bulb so some tips are getting a high PAR so they should make excellent use of the increased CO2. ISSUES: The plants are getting a lot bigger and taking more water per week. I removed some of the plants and moved them into a different tent to allow for enough room for them all to bush out and finish stretching. TECHNIQUES: I implemented a very small amount of LST throughout the week and removed only a few inner leaves(defoliation) to increase the light to some of the inner branches.

Hello growers, Day 28 of 12/12 Due to the temperature drop outside watering every 2 days now. Around 15 in morning then back up to 24 after an hour with light on. Other than that, nothing else to report. Merry Christmas 🎄

Estoy satisfecho porque la planta está sana y creciendo bien pero la conclusión es que con tres o cuatro plantas y poda apical se reduce mucho el tiempo de vegetación. En cuanto a riego está pidiendo mucha agua y creciendo a gusto. Espero la semana que viene pasarla a floración. Hice una muy ligera defoliación y un canal para que el agua no se escape por los agujeros de la maceta al regar.

5000 ml jeden 3 Tag in der Zehnten Woche pH-Wert: 6,3 EC-Wert: 1.4 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen wir haben aber Raubmilben ins spiel gebracht zur vorsorge gegen Spinnmilben und andere Schädlinge 😉💪 Düngemittel: Brenneseljauche self made hat einen EC wert von ca 1.6 und etwas PH up von Biobizz Besonderheiten: Sie wurde nun in den Outdoor Bereich gesetzt und wartet auf das umtopfen. -Tag 64 heute haben wir ihr wieder Wasser mit Jauche gegeben und wir haben den PH wert etwas nach oben verschoben in dem wir PH-Up von Biobizz dazu gegeben haben. sie bildet immer schönere und dichtere Buds. Sieht sehr gut aus und so langsam steigt auch ihr Duft in die Nase 😍 -Tag 66 nicht viel mehr zu sagen heute, sie legt schön an dichte zu und Geruch. -Tag 68 heute haben wir ihr wieder Wasser gegeben 👍 -Tag 70 heute wieder Wasser gegeben und Blüten Kontrolliert, ob sich irgendwo Pollensäcke bilden. Man weiß ja nie was da kommt 😜

Day 15 ready for the transplant tomorrow. Just watered each with 1/3 cup of water. It was the first watering since the initial one 15 days ago. My basement is very humid. All 4 are growing pretty strong. The 2 on the left and right are the Guavo Autos and the other 2 are Sticky Soul Photos. They will continue their life outside starting tomorrow. Day 16 and all 4 plants have been transplanted into their final 3 gallon pots. What I did was water each cup yesterday with 1/3 cup of water. Today I drilled some holes in the 3 gallon pots. I filled it with a small amount of build a soil light mix and the rest with happy frog. I poured 2 cups of water into the new soil. I made a hole. I added 2tbspns of Mykos to each pot. I slid the plants out of the cups into the hole. I watered those in with 3 cups of water each. A little ran off through the bottom. I’m going to keep them in the shade for a few days then toss them in the sun. Stay tuned! Day 20 and we are looking really good. Check the video above.

Hey now, this week went pretty good, the buds are about done bulking up, and just waiting on the trichomes, I was really hoping she would be about ready, but I think she needs another week to week and a half total. The buds are rock hard, and super sticky. I have no clue what she will yield because the colas are not that thick, but there are definitely alot of them. I plan to squeeze her into rosin, and hopefully I can break the 25% mark for the first time with her, but we will see. Thanks for stopping by, I hope you enjoy the videos, Happy Memorial Day Family, Stay Safe and Blaze On!!!

The ladies are going into flower now in the main room and the second room is half up and running with four sick French macarons and 29 cuttings of all the strains

Week 4 of flower and the boys have finally spilled the pollen. It’s bloody everywhere in there so I expect that no bud has gone undefiled😎. The females have all witnessed a pretty significant nitro deficiency now that they’re trying to produce seed instead of flowers. We changed out the nute mix to 1/3 grow and 2/3 bloom and they immediately showed improvement. No slight against Druid at all - we moved to a different brand simply to conserve it for the flowering runs where it really matters👍. The lone separated spicy bitch female that entered flower early is looking really sexy. I very much doubt she’ll have escaped full pollination with this much in the air however. We won’t use any seed from this girl but if we’re lucky we might be able to pull out some sample bud. We’re taking down all the males today now that their job is done and we’ve also decided to harvest from the one specific cum dumpster male that has shown as the most vigorous. Doubt we’ll get around to using it before it’s shelf life expires but u never know. The details on that will be in the harvest entry coming up. Other than that - we’re through the fornication stage and it’s all just keeping the ladies alive until it’s time to extract some seeds👍😎👍. Still workn on the potential cross names - that’s the best part😉. Until next week🤟👊. Background Fingers crossed that these Spicy Bitch regs provide at least one male so that we can back build some stock of it. In the event that does take place we’ve got a single clone of each strain from the previous pollen chuck to sit in the tent with them so they can make babies for the next few months. The whole point of the last year was to start making some foundational genetics for a third generational cross we could call our own. If you’ve been following along than you’ll know that it’s been anything but easy. Our previous pollen picks didn’t pan out at all so we’re back to the drawing board with a new option from ExoticSeeds. This’ll be a 10 plant run with 5 regs and 6 strains for pollination including the strain itself. We’re running in a 2x4 MarsHydro grow tent all powered by a Mars Sp6500. That’s a little more than 600w packed into half the recommended footprint😳. Why? you ask - because we like our buds big and overcompensatory😂. Really, I’m just of the mind that we can pack more light into this space than recommended and get much better results. The math doesn’t lie. At least not as long as I wasn’t high when using the calculator again….. Many thanks to @MarsHydroLED for the opportunity to test run the equipment👊. In addition, we’ve also moved to a new nutrient system - Druid Nutrients out of the Netherlands. They don’t really have a presence on GD yet but you’ll be hearing about them very soon I’m sure. The beauty of this system is that it’s literally a 1 (one) component system for the entirety of the plants grow cycle. It really has changed the game in terms of ease of feeding and maintenance. It’s also very versatile and seems to provide everything needed across multiple different strains in the same ratios. Keep your eyes peeled for these folks. Pretty much a guarantee that they absolutely blow up once more people know about them👍👌😎. Strain Background Spicy Bitch: predominantly sativa, heavy yielder with a daytime kinda trip profile. It’s a cross of Queen Mother and a Pre-2000 AK47. We’ll pull what pollen we can and hope to have a female run out a larger supply of seed for the future. Many thanks to @Exoticseeds for the chance to give these beans a go👍👊. Pollination Strains: Holy Surfer S1 - this is one of the focal points for this cycle. A fellow growmie was kind enough to ship over some S1 genetics I took an interest in. The only ask back was that if I did cross it to send a few his way for testing👍. Shoutout and cheers to @blendmedmedman. Hoping to have something back to ya in short order. For full details on this alluring hybrid option check my buddies link at seedfinder - https://en.seedfinder.eu/strain-info/Holy_Surfer/Smiling_Tiger/ Northern Lights - this came from a particularly interesting batch of seeds that have shown a very dependable variegation trait. It’s a compact and squat plant requiring very little maintenance. Typical for the strain really. It’s been chosen as an option to potentially mellow out the high , shorten the stature of the resulting hybrid and inject it with some of that mellow indica effect. Boogie Nights - total shot in the dark. Still haven’t even tried the strain myself yet but it was available at the right time and interesting enough to make a salad with. Big thanks to AMS who’ve been nothing short of an excellent seedbank to collaborate with. Expect similar growth characteristics to that of the Northern Lights. Better resilience however. Blueberry - this particular clone is from extremely strong stock. Spliff seeds broke the mold with this strain. She’s lower maintenance than the NL, more resilient than anything else we’ve got on the menu and the terp. Profile on this girl is out of this world. If we can bring any of these qualities to the cross, then it could be magic👌. White Widow - garrghh, I just can’t get away from this particular plant. Again, still haven’t even tested the buds yet and all I can say is that the growth characteristics are extremely vigorous and desirable. This plant is one of 3 unicorns that I have yet to tame due to a combo of extremely bad luck and circumstance. All told, it’s still the same story: a VERY experimental breeding project designed to shotgun a broad swath of genetics against a reliable and dependable Breeder who’s put out proven fire 🔥🤟😎👍.

Well the end of week 5 start of week 6 day 42 from seed I got some early signs of Pre Flower I want to say they are all girls ?!?!?! no hairs yet I'm hoping this week to see some, I took 3 clones also, one from each of the 3 remaining plants. once I get the high sign "no pun intended" hairs that is, I will start to chemically treat the best looking MILF. (Mother I'd Like to fertilize) I hope they are all girls like I said before this way I can get some genetic diversity instead of self pollinating the same MILF. On the observation side of things these plants have taken off in the last week they are all about even at 18" and the Fan leaf's are about 10'' across. The feeding seems to be spot on with no burn from the dry nuites mixed in to the coco. I gave just plain water today ON THE 25TH. I am feeling the Biologicals on this grow, The Mammoth P and the Enzymes are really doing a nice job of making the food available to the plants also the Fulife and Cargo Boost are really impressing me as well. This is why I love trying new things on my grows to help me become a more complete grower and really understanding the biology of the plant. It has been Hot these last few days in the 90's I think the C02 has been helping the plant deal with the high temps no sign of heat stress they are drinking a lot more lately respectively. that's it for this week hope the clones take and wish me luck on the MILF's. Stay safe all.

29.09.2024 - Day 17 every plant was dry after 3 days, i only gave them 3L of plain rainwater pH 6.0-7.0~ each 04.10.2024 - Day 22