Ladies are getting fat! As of day 69 (Feb 12) we have started CropSalt CAKE feeding. Time to get even frostier and fatter. They are still drinking over a gallon a day each easily. If you have any questions for me, please feel free to ask! I want to help others grow Autoflowers like this.

used fishing lines to help Marshmallow OG holding its Buds because they get so heavy. temps variate on daytime between 21 -24 °C and RH of 45 - 55% nighttime its 18 - 19 °C and RH of 41 - 50% the plants are colloring purple and the terps are getting more intense by each day. Nutter Budder had startet growing 2 Nanas in 2 of its Buds. I think the Nutter Budder was more like a 9 weeker when the other 2 strains are more like 10 weeker

Aug 24: starting the fifth week of flowering. This plant was started late so it didn’t get as much veg time, but it is flowering nicely and is doing quite well. Updated diary to list this as Overdose Fast which seems more likely than Auto Overdose. Likely just mis-packaged, and also based upon other growers comments about their autos not autoflowering. Aug 26: she’s doing well and buds are forming. Watered with potassium silicate this evening.

I guess we get about 100g dry weight

Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.

☄️Salut les copains,👋 🍊J'ai récolté 4 plantes au 53 ème jour de floraison. Après avoir retiré pleins de feuilles de mes bourgeons, j'ai pesé 75 grammes de bourgeons sec sur la balance. C'est ok mais j'aurai aimer avoir plus. 🍊J'ai commis des erreurs durant cette culture et je n'avais malheureusement pas la possibilité de m'en occuper comme je le voulais. 🍊Je vous suggère de ne pas reproduire mon dosage pour les nutriments(+serait mieux) et ma fréquences d'arrosage(moins d'eau et + souvent serait mieux). 🍊Je compte modifier certaines choses pour ma prochaines culture en espérant améliorer le rendement 👌 🍊 🍊Je prévois aussi de faire du ice o lator avec les plus petits bourgeons et les feuilles de mes Lemon Orange, je vous partagerais ça ici et sur mon instagram bientôt !✌️ 🍊 🍊Mon Instagram ☄️ https://www.instagram.com/hou_stone420/

The pics and videos are from day 37 of flower. All 3 of these are starting to beef up a little bit, they have perfect bud structures. I'm picking up a creamy kinda vanilla smell on them each having slight variations but what do I know? I really want to grow all 3 phenos again sincenmy clone runs always seem to be just a little bit better. I said this on my last post but for anyone droppin questions in my DMs just comment on a journal I dont go thru the dms its alot of the same questions over and over. That way anyone can see the questions and responses and I'll try to do a better job at responding to comments as well. I always have so many diaries going at once I rarely stop and read them all until the very end when things slow down. Hope everyone had a happy halloween3👊

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

Handmade DWC and noticed a great start for week 2 Started in Root Riot cube

Hey dudes, The final defoliation took place at the beginning of the week. Since then, the lady has just been allowed to grow. I had a bit of a problem with the low humidity. So I helped myself with a 10L bucket, a fogger and a timer. There's nothing else to mention, the plant looks great. What more could I want? Light Power: 100% Day 68 Flower #23 Lollipopping Day 71 Flower #28 Watered with 2,5L freshly brewed compost tea Photosession

In dieser Woche hat sich sehr viel getan , die Blüten sind herangereift und haben nochmal etwas an Volumen dazu gewonnen.😍 Der Geruch ist sehr stark und die Terpene intensiver geworden. Es sind vorallem, Benzin und süße Düfte wahr zunehmen 🍬⛽️ Der Runtz Teil überwiegt leicht . Die Skywalker OG Runtz Auto brauch nicht sehr lange um die Blüten auszureifen. Deshalb habe ich hab dieser Woche, begonnen die Pflanze mit Flawless Finisch zu spülen und so auf die Ernte vorzubereiten 🍁🙌🏻

The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.

Hello everyone 😎 After 24hours in a glass of water with a few drops of hydrogen peroxyde all the seeds have germinate🌱🍓🍌 They will grow under the new Mars Hydro 1200 evo💥

we are entering the 6th week. slowly the little one is growing towards the sun. i did a first topping and started with LST. maybe it was too early with the topping? we will see. the sun is shining more again and the temperatures are slowly rising.

I had a good week. Been cutting back on the nutrients and I’ve been adding some unsulphured black strap molasses into my mix. Hoping it helps the microorganisms in the soil.

Buds are developing nicely