Likes
16
Share
Currently in the 9th day of Flower and the buds are starting to form nicely. I am spotting a small zinc deficiency on the leaves, the colour inside the leaf is light greenish. The PH was a bit too high and last week also might overdid it with the nutes. Solution for now is down the PH day by day till I reach 5.8 and then let it rise up again slowly. Lets see how the new leaves will form and the bud thickens. Smell is really great, strong pungent and exotic.
Likes
9
Share
@Flixus
Follow
Ab hier wieder auf Deutsch. #1 ist heute 37 Tage alt, #2 26 Tage. Ich habe versucht diese Woche etwas besser zu dokumentieren um den Report ab hier sauber zu führen. Beide Pflanzen haben 5G Bloom pro Liter Erde bekommen und wurden mit Enhancer gegossen, sie zeigen keinerlei Mängel und der Trieb der gebrochen war hat sich erholt. Ich habe bereits das SCROG Netz über den Pflanzen installiert. Auf Anfrage hat mir GC mitgeteilt das ich ab morgen den Blüte Dimmer der PWR-4 auf 25% stellen soll. Dann BW2 auf 50 und BW3 auf 100%. Ich freu mich schon auf die nächsten 7 Wochen.
Likes
13
Share
@Luv2Grow
Follow
This strain took really well to LST and didn’t seem fazed by the training at all. She did become a really heavy drinker about two weeks or so into flower and she definitely seemed to want more nutes than usual. I believe I’ve got two more seeds so will be running this one again if the smoke is worth it.
Likes
6
Share
During my previous grow, I harvested and made some bubble hash. Afterward, I dropped the used, wet buds onto this coco, and it seems some seeds sprouted from the leftover material. I’m not even sure if they’re photoperiod or autoflower, but hey—let's roll with it! Both my pH meter and PPM meter are broken. I have no idea why they keep breaking so often. They’re ADWA meters, and while you can replace the reading elements, the replacements cost half the price of a new meter. It’s frustrating, and I really don’t want to keep buying them every time I start a new grow
Likes
13
Share
Bewässerung: 1000 ml jeden 3 Tag in der zehnte Woche pH-Wert: 6 EC-Wert: 1.2 mS/cm Temperatur: 20ºC Luftfeuchtigkeit: 65% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen von befall wir haben nur mal zur Prävention etwas Sand gegen die Schnecken um die Pflanze gemacht, dies verhindert das diese sich nähern. Wir haben aber auch Raubmilben ins spiel gebracht zur vorsorge gegen Spinnmilben und andere Schädlinge 😷 PPFD: Direktes Sonnenlicht DLI: Direktes Sonnenlicht -Tag 63 bei der Space Cookies #2 werden die Blüten immer dichter 😍 -Tag 69 Heute haben wir die Space Cookies #2 mit ca. 5l Wasser und 500ml Brenneseljauche gegossen 😏
Likes
18
Share
Well it's finally time to cut her down. It's day 95 post germination for this lady, and she's at maximum potency. All trichomes are cloudy with about 5-10% amber & she's giving out a mixed palet of aromas. I can smell a very distinct mix of lemon, urea, skunk, and spice. It was relatively easy plant to grow. I started in a super soul which ran out of nutrients early and I had to supplement with bottled nutrients. Going forward I'm going to have to put more thought into my initial soil composition. Please note: I'm only estimating the 'Wet Bud Weight'; for the purposes of this diary I estimated 12-16 ounces. Cannabis can loose up to 75% of its mass during the drying phase and based on past experience, I am expecting 4-6 ounces of finished flower. Dry/cure process: 1. Cut entire plant down by main stock 2 hang upside down in a dark room with controlled humidty and temps.... - Temperature should range from 67-72 °F, and my humidity will range between 57-60%. 3. Full trim complete after 8-11 days of drying. 4. Stick in Mason jars indefinitely with 2-way Boveda humidty packs (62%). 4-20. Smoke 2 joints before you smoke 2 joints.. and then you smoke 2 more ☮️ I'll post a thorough smoke report in roughly 3 weeks Thank you growdiaries.com Thank you growmies Thank you Fastbuds
Likes
2
Share
Week nine of veg and the girls are stretching… all except the Purple Punch on the far left. She decided to go into flower last Thursday! She too is healthy and displaying some purple. Thanks for looking in at my second grow.
Likes
6
Share
After you found some good sector and clone it you let the mycelium grow and fill almost all the petri dish like I did last week. So now you're ready to move forward. Making grain spawn!🍄🍄 For grain you can use Organic Rye Berries, but you can also get away with wheat berries, or brown rice or even corn kernels(which I used myself) ! And you'll need some mason jars or honestly I used some jars that I had home just clean them very well and sterilise before using Making a grain spawn can be broken down into 6 easy steps. 🍄Hydrate Grain By Soaking 🍄Make Specialized Lids 🍄Simmer, Drain and Dry The Grain 🍄Sterilize 🍄Put your agar in the jar 🍄Colonize 🍄Soak the grain by placing it in a bucket, covering in water, and leaving it for 12 -24 hours. Easy. 🍄Drill 1 hole on top of the lid. Right in the center and cover with a small dab of high temperature silicone sealant, and leave it overnight to dry. And your jars are done. There other diff types for different methods like liquid culture etc. But I'm just going roughly through what Ive done. 🍄The next step is to simmer the grains on the stove. This will thoroughly hydrate the grains, and will soften them to make them easier for the mushroom mycelium to consume. Cook soaked grain on the stove for about 15 minutes. You don’t want to cook it too long, because eventually all the grain will crack and you’ll get some mushy grain spawn. We don't want that. 🧐After the grains have simmered on a low boil, you’ll need to drain them off. What I did is I drop them in the sink with the drain cover on. The grains will drain over an hour or so, after which you can go ahead and fill your jars. 🍄Once your jars are filled, they need to be sterilised.This kills off all the other nasty contaminants in the grain cover the lids in tinfoil (to prevent water dripping into the lid) and then just pressure sterilise them for about 90 minutes at 15 psi. 🍄After that let them cool down. Get your SAB, wipe down the walls with some alcohol wipes and place the jars inside. And wait untill they will be warm to the touch... not hot and painful 😤patience is key. Bring in your plates that had been stored by you in a dark place. And what u have to do is sterilise your scalpel and just accurately and efficiently decide your mycelium into about 10 pieces and quickly place them in your jar. And complete for every jar u make. You have to be very quick. The more you keep you're jar and your agar plates lids open the more cans they will get contaminated. There certain technics you can see online.. 🍄Ones you're done close all your jars lids tight and Jake your jar so the mycelium pieces will mix around the jar and place them in the dark place to colonize. And just keep waiting... 😅 Untill the mycelium will conquer your grain. Keep your eyes on the jars, any weird smells or colour during the waiting time.. because that would mean you got a contamination going on. Oh yeah and when about 55% of your jar is filled with mycilium shake the sh*t out of it so it will break the mycilium inside and make spread more faster.
Likes
1
Share
On week 2 the woolrock got some mohoo, i fixed it by putting water mixed with "safe roots" from Hydrotek directly into the rockwool superfice. After a couple days that problem was solved and the plant kept growing very well. And also i started to train the plants (lst)
Likes
5
Share
No problems during this grow! 👌 Very frosty and sticky ❄️🍯 she didnt stole her name thats for sure 😅 also very strong girl
Likes
3
Share
She's looking very strong and healthy,she's gonna be a 🔝 lady for sure,let's keep on working to make things happen,peace and love ✌️🌱💚❤️💛
Processing
Likes
39
Share
Humboldt OGKZ Fast Flower and DinaMed CBD Plus Week 2 Veg Jan 18 The Dinamed has been transplanted into DWC from soil and is doing very well. Was going to partner it up with an HSO Amherst Sour Diesel or perhaps a Blueberry Headband. Have new genetics on the way so, I think I'll pop in an HSO OGZKZ Fast Flower! Dinamed Plus from Dinafem Seeds (1) and OGKZ FF (1)from Humboldt Seeds. https://www.dinafem.org/en/dinamed-cbd-plus/ https://www.humboldtseeds.net/en/fast-flowering-ogkz/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit DWC Nutients https://generalhydroponics.com/floraseries FloraGro FloraBloom FloraMicro Diamond Nectar https://generalhydroponics.com/diamond-nectar Cal Mag https://generalhydroponics.com/calimagic SuperThrive https://superthrive.com/ Epsom salts
Likes
4
Share
fifth week flower, the ladies are getting really tasty and developing well!!
Likes
62
Share
@Hou_Stone
Follow
one of my FullGas is late from the beginning and even for flowering. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone
Likes
25
Share
Difficoltà a calibrare il quantitativo d'acqua...piante sofferenti
Likes
32
Share
Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Day 57 Booster 2gr/L Big Bud 1.66ml/L Humic And Fulvic Acid 1.66ml/L Overdrive 1.66ml/L Day 61 Short Flowering 2gr/L Booster 2gr/L Humic And Fulvic Acid 2ml/L Overdrive 2ml/L 1.5 Liter Per Pot
Likes
25
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
11
Share
@Microsun
Follow
She’s getting their folks almost, I’m pushing for 10-30 amber and mostly milky. But we gave her a great watering and some tlc, took off some fading leaves and made sure she was happy and growing well, added some thrip protection due to reducing a outdoor from the snow. But all is good in the hood.