New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Week 12 D86 Flowering 35-40 days since stigma started showing. She is growing really well, for now what ever all the little rust spots were are gone. Still not solid explanations as to what it was or to as why it came up. Made a hard choice. And snipped the roots that were drinking from the plate, as this could of been the cause as to why this was happening on otherwise a healthy looking plant. Lowered the PPM from 1550 down to 1250 and will bring her down another 3-600 over the course of the next week and then another 2-300 the following week and keep her on regular 700ppm feeds of just bloom, but candy overdrive and B-52. All other nutes will be pulled over the next 2 weeks, gradually and not all at once neither, don't want to shock her into a def, just want to make sure all this crap is flushed from her. Big bud, she got her last feed of that today and that's her done on that now. She was started on her normal mix - 300ppm. RH is holding at a steady 65 temp is 26, 21c with lights off. 14/3/22 Added my 2nd intake fan was able to bring down the RH down as low as 53% with the 2 on full blast. Rooms RH is at 46% dehumidifier has been running 24/7 since I got it. Not good enough though. It works but looks like I'm going to get a 370watt 25l (meaning, it takes 25l out of the air every 24hrs, the 1 im using now is a 60watt that gets rid of 2l every 8hrs). It'll do in an hour what this machine takes 8hours to do. So it'll actually use less energy overall. 18/3/22 Plant is coming on nicely, putting on lots of bud mass, hopefully it'll keep packing on bud as there is not much in the way of sugar leafs it'll just be nice dense bud. For the last 24 hrs I've thrown her into a hard flush, 6l of water with 2 flushes one last night 1 tonight after each flush 50ml with sensi cal mag extra 1ml/50ml was given so the plant wouldn't go into full flush and the nutes left behind will break down helping nute uptake. Very important to introduce some cal as if you flush for too long and have a high build up of salts you'll cause a form of nute lock and throw plant into the flushing phase. So always use some cal mag on top to break down the nutes you are trying to flush. Thanks for reading gottagrowsometime

Week 9 D66. Mad how far she is behind. She only started first signs of stigma, (flowering, pistons, white hairs) 14-18 days ago. So by right you should give any auto up to 55 days of flowering. I know some say 70days from seed-harvest but you start counting once you see signs of flowering, no auto will be done under 40 days, has to have at the very very least 40days and even then she still more than likely could still happily bake for 14days and not bend a leaf in unhappiness. You always wanna go by the trichomes either way. Am pushing the PPM up by a couple 100, she can take it. Am going to give her another 20days on this mix 3 weeks and then change it up by dropping nutes and cutting the PPM at least by half a week before the 2 week flush, (when I say flush, I just mean just flawless finish with no run-off and let the plant finish up on that. This being the course if nothing comes up. But you never know with autos. RH is steady at 65% in the tent and 55-58% in the room temp is 21 with lights off and on its 26c. 15/3/22 Taking a lovely overall shape. Going to have some nice long colas hopefully. Thanks for reading gottagrowsometime

Days 51 7/3/2022

Hi guys! For this run i got some nice looking clones. Really looking forward for this one. 11x Gelato Sorbet (Dna Genetics) left side in the box 13x Cookies&Cream (Exotic Genetics) middle of the box 8x French Macarron (T.H. Seeds) right side of the box My setup got a nice update with the Sanlight Evo 5 100 with 320w. Aim to upgrade all of my S1 Q6w soon. All together with 985watt now. I use Biobizz-Lightmix and started to add Nutrients at week 3 after i planted it in the 8l pots. For this run ill use Hesi Nutrients because i use them for years and worked most of the time pretty well for me. I fimmed some plants and trained most of them with LST-Training. I will send them into flower in the middle of week 5 ---‐------------------------- Week 4: Plants are looking ok. I wanted a higher humidity and tried to increase it with a humidifier. Week 5: The fimming worked quite well on the plants i used it on and i got a nice increase in height and strength Aiming to send them into flower in the next few days. :) Week 6: Day 3 of Flowering plants look nice and healthy. Some gelato sorbets had issues from stress but they catched up ok. Week 7: End of week 2 of flowering plants look ok most of them. After i saw some nice results at tents from friends and had some own nice experience with the terpinator i start giving "purpinator" this run a go and start mixing it into my feeding schedule every watering Hope u like the diarie and follow with this run!

once i transplant these in the next couple days into 3 gallon pots i will write more in this journal update more and show the lst i do and introduce a second viparspectra light. thanks, the pheno 😂

Scratch what I said at the end of last week pests are still around just had some bug fly at me and bite/sting me on the neck now a got a welt on my neck smh, not sure what the heck it was it was some sort of black bug maybe a thrip but I honestly have no idea, did another neem oil drench on the medium only and tomorrow I'm going to use a hydrogen peroxide mixture again that way I can also use it on the tops and undersides of the leaves as well. Some of the roots started to become exposed on the top soil so I added more an inch or two coco to cover the exposed roots. Another successful week I guess the plants aren't dead so onto week 9, Week 4 of flower

Plants are growing very nicely! Strawberry Banana has really taken off! 3/12/22 Turned on Auto Pot system! Will wait a week or so before turning on Air Domes!

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

Las veo creciendo bien sanas. Le aumentaré 2 horas más de luz para que crezcan lo máximo posible y aprovechar este tipo de Led. Durante las semanas estuve aplicando un estimulando de raíz BioBizz y se han ido afirmado a la tierra de buena manera. Además, encendí el ventilador de pinza en baja potencia para crear una suave corriente de aire.

The enormous growth and bud development this week is unbelievable. This strain keeps pushing and pushing, I can see already that these plants will be covered in bud. Also, these plants are in size what my previous photoperiods grow in 8 weeks and some flowering. Really amazing to see. So far my experience with autos has been meh at best. These plants are nothing like that and are resilient and forgiving. The Mars Hydro SP-3000 is now on full blast, it gives me some white pointies and the temps go up in the tent. I'm on the threshold of heat stress and light burn. I'm trying to push it maximally and to get to know the boundaries. Thanks again for checking out my grow!

The enormous growth and bud development this week is unbelievable. This strain keeps pushing and pushing, I can see already that these plants will be covered in bud. Also, these plants are in size what my previous photoperiods grow in 8 weeks and some flowering. Really amazing to see. So far my experience with autos has been meh at best. These plants are nothing like that and are resilient and forgiving. The Mars Hydro SP-3000 is now on full blast, it gives me some white pointies and the temps go up in the tent. I'm on the threshold of heat stress and light burn. I'm trying to push it maximally and to get to know the boundaries. Thanks again for checking out my grow!

Well what can I say... added a used LED light to the grow that I got for a good price as energy prices are quite high and getting more expensive. Going to upgrade the ventilation system as well, having the box in my bedroom is just unbearable with the current ventilation. High humidity at night above 60% causes me a headache, I am trying to reduce it as much as possible - hope the new system is gonna work better. Plants have a variety of issues, also I believe that they don't grow as fast as they should. Any help/comment appreciated!

9 março - 15 março 12 março - feeding 16 março - cheese #1 feeding: Bio bloom 0.5ml ; top max 0.5ml ; bio heaven 1.5ml; sílica 0.1ml; bio grow 0.7ml 16 março - cheese #2 feeding: Bio bloom 0.5ml ; top max 0.5ml ; bio heaven 1ml; bio grow 0.5ml

She got very bushy so i defoliated today the flower is kicking in