she slowly grow..

I was able to identify the problem why the Bluedream grows so poorly. Some leaves had covered the substrate and mould had developed there. I removed these leaves, loosened up the substrate and installed another fan. It actually took 7 days for the pot to become noticeably lighter, it was practically standing in water and hardly any air was getting to the roots. The switch to flowering fertiliser also came too late. So all mistakes on my side that were caused by too much watering. Nevertheless, they are continuing to develop well and I hope the end result will be reasonably satisfactory.

I cut of some of the bigger leaves off as they we're creating a lot of darkness inside the plant.

Last week went well once the distance was changed for the light and I added another mL per gallon of cal-mag and she is getting color back to some of the damaged leaves. I think she is back on the right track. She has needed more cal-mag than anything I have grown. Can't wait to try it out when finished. The smell is unreal. Reminds me of a super sour smelling candy like sour patch kids. She is stacking up bud nicely so far. Just smooth sailing for the next few weeks I expect. Until next time happy growing to everyone!

Chop I wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smile

En 2do video se encuentran, MPK #1 #2 y Og cream x gg #1 y Og cream Feno seleccionado. 1/03/24

Explosión de resina!!! Una genética que no me deja de sorprender un olor brutal a cítricos y su olor a Haze un gustazo pra la vista y el paladar sin duda esperamos impacientemente el dia de degustar este manjar!! Espero que os guste Salut y força al canut Farmers!🍁

Blütewoche 4 Ende der Blütewoche 3 noch mal kräftig Entlaubt und Lillipoping angewendet. Intensität der Lampe 100% 👽Outta This World 👽 🙏Peace🙏 cRypto666

Hello Diary, Apollo F1 could best be described as "little fat". The smallest on the Farm, only 40 cm, with a pile of leaves from which the formed flowers peek out. The leaves are a beautiful dark green color, densely overgrown with the entire plant. Since it did not grow too high, the plant took the shape of a ball. As for the flowers, they are filling in nicely and the trichomes are starting to appear. The scent has become more intense, just as befits this stage of flowering. Watering has become more frequent, every three days each plant on the Farm receives about 2.5 liters of water. I continue adding Bio Flowering Booster and Easy Bloom tablets. Conditions on the farm are good. The temperature is around 28 degrees, while the humidity is around 45%. Here's what it looked like last week. 06/06/2023 - Day 38. Watering. I added all three components from the Bio Flowering Booster. pH I lowered it to 6.0. Each plant received about 2.5 liters of water. 09/06/2023 - Day 41. Watering. This time I put one Easy Bloom tablet in 7 liters of water and watered all three plants on the Farm with that amount. 10/06/2023 - Day 42. End of the sixth week. I photographed the plants and removed three or four yellow leaves. Apollo F1 - 41 cm That's all for this week, thank you all for your support and see you soon.

Could anyone estimate when they will be done .

💚Please Like This Diary and Leave a Comment!💚 pH @ 6.8 Plants grow nicely and are strong! No Nutritions until flowering start. Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💸💸💸Wanna Try Red Wine from Seeds Genetics?💸💸💸 https://seedsgenetics.nl/product/red-wine-gefeminiseerd/

No earlier pictures as only just found this site first ever grow

Flowering day 52 since time change to 12 / 12 h Hey guys :-) All ladies look very healthy and delicious :-) We're slowly getting closer to the end. This week it was poured 3 times with 1.2 l each (sewing materials see table above) At the next watering there is a very light rinse with Clean Fruits so that the last nutrients can be slowly used up. The trichomes are now checked every day. I'm looking for my microscope with an app so I can take pictures of it 👍. I wish you a lot of fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.barneysfarm.com/dr-grinspoon-5 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Today marks the start of the final week before harvest, and I’ve officially begun flushing the plant. It's really exciting to see how far it has come. The buds have developed beautifully, and the scent is amazing – super fruity and sweet, almost like a mix of berries and tropical fruit. The aroma fills the space every time I check on it. I’m pretty satisfied with how the plant has grown overall. The structure is solid, and the buds are dense and sticky. Everything looks on track for a good yield, and I can’t wait to see the final product after curing. Fingers crossed for a smooth finish!

Day 57 No water new bigger fan loosely tied her in and dropped net an inch - most hopefuls had made it up there themselves but some need encouragement - anyway pics speak for themselves Day 58 500ml plain rain She looks a little confused - she hasn't got all the stuff off from underneath yet - just letting a couple of latecomers get to the net, then I'll whip the lower factory leaves off and fim for last time Day 59 Just 100ml plain rain - nutes tomorrow Day 60 2:1000ml TIger Bloom Grow Big 1.5:1000ml Calmag 3:1000ml Big Bloom 7:1000ml Unsulph Molasses in 700ml pH6.7 water Temp 27C rH55 Last Grow Big - Bloom all way now Day 61 Got the temp / rH just right now she is drinking 800ml 6.5pH rain water in 24hr period - lights good height but loads of room to raise so that's cool. Checked for mites - found a black one a week ago and squished it - defoliation prob helped a great deal coz no signs anywhere of any larvae, Love the genetics of this plant. The uniformity of the leaves just stunning - would be a good mother - did try cloning a few cuttings but 3 wks into flower... It is a myth you can't do cuttings in early flower but it is way harder than doing them like 2 wks before and before you throw the hormones all over the place by transitioning LOL and as I can't be bothered to do it properly - they will most likely all die 😁 just did coz hate to throw away a stem cutting 😏 - lol they all died Day 62 300ml ph6.5 water Day 63 3:1000ml Big Bloom 2:1000ml Tiger Bloom 1.5:1000ml Calmag 7:1000ml Unsulphured Molasses in 670ml pH6.5 rainwater

so, go buy it, go grow it, go get some Euphoria.... you need it

June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa

18.05. 🌿 Day 18 – Smooth Progress & Transplant + Feeding Everything is progressing nicely! All four plants are looking healthy and strong, with compact growth, well-spaced nodes, and no signs of stress. The early vegetative stage is going very well so far. 🌱 Transplanting: Today, all four plants were transplanted from their 0.2L starter pots into 19L final containers filled with CANNA Terra Professional soil. The roots were well developed and ready for more space — perfect timing. 🌿 Feeding Update: During transplant, each pot was amended with 60g of Green House Feeding BioGrow, mixed into the soil to provide a slow-release organic nutrient base. This should support strong vegetative growth over the coming weeks without the need for frequent liquid feeding. The plants have settled in well and are showing no signs of transplant shock. With plenty of room and nutrients now available, they’re expected to really take off soon.

Really don’t have much to say been a real easy grow even tho temps been getting in mid to high 80’s lately I got a jewelers jewel think it’s cheap cause it’s 10X can’t really see the trichomes to well I seen some amber but I’m sure if it’s not cut down this week may23rd it will definitely be cut next around May 27thish

Busy week getting the new setup going. All the girls are doing great