Okay so pk boost and as with everything else in this grow, it’s a week behind what it really should be, so I may have hit the tropicanna poison with a PK Boost too late, where as, for the orange hill special and frosted guava it’s probably a little early but hey ho - you gotta compromise with the Autopot system if you are growing multiple strains that are really quite different in terms of gene pool. Edit: okay so it’s 4 days later and it ALMOST looks like a different plant! Its colours are coming out now. As you can see, some of the side branches pistols are turning orange and there is even some colour turning up at the edges of the swollen calyxes. I don’t think I will get too much light penetration to be honest, due to the fact that it’s too crouded in there - it’s so easy to forget how big they get when you first veg them! (Particularly as it’s my first grow in months and first photo grow in years!) Next time I will just make sure I germ the seeds at the same time - although, it wasn’t really my fault, per sé. This is definitely the most advanced plant for sure…then the NYC diesel. Edit: so I noticed that my tall tower fan broke AGAIN and so I decided to buy a clip on I think it’s an 8” one that rotates - it’ll probably stop rotating after a while but the reviews say 18 months in after having bought the product, it still works fine, just doesn’t swivel. Tbh, it’s cheap enough to if it breaks then I can just replace it - it should def last longer than a tower fan that’s been flooded with 10-15l of water! Twice! So I can’t say I’m hugely shocked… For now, iv taken the fan that is a clip on that I was using for the extraction of my drying tent - it’s surprisingly powerful for such a small USB powered fan tbf!

Esta semana, poca cosa a añadir, tan solo que continuamos como la semana pasada. Riegos alternos entre abono y agua, según tabla de fertilización de JUJU Royal by BioBizz. Hemos aumentado la potencia de extracción para evitar olores.

01/08/18 - I fed them all 1 litre each, one of them seems to be praying up but the other two Seem a little bit droopy still. 02/08/18 - #3 is praying like usual and the other two are getting better Day by day I’m going to be giving them another feeding tomorrow, I have seen roots stretching out to the sides of the pots so I might saturate the whole pot. 04/08/18 - horrible sight today looks like rusty cracks in some leaves , not got a clue what this. 05/08/18 - browning has continued since last night and it’s all on the new leafs not the older ones. i fed them without any calmag , so I think it could be a deficiency of some sort (cal/mag).the mad thing is, it’s only two of the girls, one of them is completely fine nice green leaves not yellow marks that turn orange/brown. It definitely has nothing to do with my ph or all three girls would be showing some symptoms seeing as they all get fed with the same soloution.✌️🏻 07/08/18 - everything’s cleared up their was slight nute burn in the process but everything seems a lot better so I decided to start LST. all the new leaves are the colour they should be with no nute burns or calcium deficiency 🙏🏻

Chopped at day 60. Musky and pungent dank.

Girls are trucking along without much issue. I did have a bit of PH flux due to my PH meter calibration being off but no biggie, she didn't show too much signs of stress. These girls are starting to stink which I'm happy about, hoping for a really cheesy harvest :D

Hey now, hope everyone has been well. Super excited football season is finally here so things are about to get busy. I went out of town for 4 days and the plants struggled a little bit with the PH getting slightly too high before I returned. I also came back to see that some type of insect was munching away on the lower leaves of my Sundae Driver which I sprayed the plant and coco with neem oil, but hopefully they didnt do much damage before I can get them under control I have never experienced insect problems indoors, likely because I grow in Coco and not Soil. However, I left a 5 gallon airpot full of coco from a previous grow outside for a couple weeks by mistake, and pretty sure bugs got into. I wont make that rookie mistake again. Anyways the rest of the ladies are looking pretty good, They are almost getting what I consider a full dose of nutrients, even though it half of the manufacturers recommended dosage. I am feeding all Gen Hydro cal mag, Armor Si, and maxi grow. Not sure why I can't add it under GHE or the company that bought GHE. I also add some food grade hydrogen peroxide to keep the reservoir fresh for around 10 days or so but I clean it once a week. I did get all the ladies transplanted from solo cups to airpots on day 16, and it took 24 hours or so for them to recover from the transplant and start growing again. I am running 3 of the 3.4 gallon, and 2 of the 5.4 gallon just because that is what I had available. I hopefully top them all sometime this week for the first time, as soon as the roots are a little stronger. I let them grow to 7 nodes or so before I top them and make sure they're growing fast. Hopefully I can still mainline the Sundae Driver, she looks healthy other than those two leaves chomped off. All the plants are on their 5th nodes, except for the Green Crack 2.0 which is only on her 4th node. We got another heat wave coming through my region that I am not too excited about but at least its earlly in the game and I dont need to crank this light up yet. I am only running it at 30% and its putting off plenty to keep this ladies happy. Hoping to get a topping done this week, then another one next week, and be ready to flip to flower by week 7 or so. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Getting ready couple weeks left

Kweekverslag Week 3: Cheese van Seeds Genetics Datum: 18 maart 2025 Het is weer tijd voor een kweekverslag, en dit keer over mijn Cheese-plant van Seeds Genetics! Week 3 is voorbij, en het is geweldig om te zien hoe deze soort zich ontwikkelt. Laten we eens kijken naar de details van deze spannende week. Groei en Ontwikkeling: In week 3 is mijn Cheese-plant flink aan het groeien! De bladeren zijn robuust en hebben een heldergroene kleur die doet denken aan een weelderig weiland. De internodes beginnen mooi te verlengen, en ik zie al enkele takken zich ontwikkelen die veelbelovend zijn voor een goede opbrengst. Het is echt een plezier om naar te kijken terwijl de plant zich zo goed ontwikkelt. Voeding: Ik heb de voedingsstoffen zorgvuldig afgestemd op de behoeften van de plant. Deze week heb ik een combinatie van stikstofrijke en kaliumrijke meststoffen gebruikt om zowel de vegetatieve groei als de bloei te stimuleren. De Cheese-plant lijkt deze mix te waarderen, want de bladeren stralen gezondheid uit en zijn stevig. Licht en Temperatuur: De lichtcyclus blijft op 18 uur licht en 6 uur duisternis, wat optimaal lijkt voor deze soort. De temperaturen variëren tussen de 21-24°C, wat ideaal is. De luchtvochtigheid heb ik rond de 52% gehouden, wat perfect lijkt voor de groei en voorkomt dat de plant uitdroogt. Training: Ik heb deze week ook begonnen met low-stress training (LST) om de takken in bedwang te houden en meer licht naar de lagere delen van de plant te laten komen. Het is ongelooflijk om te zien hoe Cheese zich aanpast aan de training. De takken zijn al begonnen te groeien, en de naastliggende scheuten krijgen ook meer kans om zich te ontwikkelen. Gezondheidscheck: Tot nu toe is alles gezond en in topconditie! Er zijn geen tekenen van plagen of ziekten, en de bladeren zijn vrij van vlekken of andere afwijkingen. Ik controleer regelmatig op eventuele problemen en zorg ervoor dat ik de plant goed water geef. Conclusie: Al met al was week 3 een fantastische periode voor mijn Cheese-plant. De groei is indrukwekkend, de geur begint zich te ontwikkelen, en de plant voelt sterk aan. Ik ben benieuwd naar wat de komende weken zullen brengen en kijk ernaar uit om meer updates te geven! Tot volgende week! 🧀🌱

I changed my tent this week, the lamp and the Mars Hydro extractor convinced me that it was good gear so I took the tent in + 😀 Pulling all the branches with ropes is way too much work... I think I'll just pull the 2 main branches down and add a scrog net next week ----------------------------------------------------------------------------- -Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8 -Daytime temperature: 29°C -Night temperature: 25°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite.

We are having good progress. Took clones of weekend at Garry's and Miami Miami 2 and Purple Marmalade 1

These were supposed to be a more finicky plant by 34 street seeds, as reported by them and other home growers. However, I found it to be fairly normal, was definitely a feeder, and could have probably used some more, I just found it easier to have to mix one feed for both growing had growing. No issues with pests or PM, great yields, big large colas, despite only topping once, and snapping one of those tops of f two of the plants! Anywho, 10/10 would recommend for the $50 pack of seeds *Bonus* I had the three plants tested for THC and CBD at my local grow shop, they tested at 25%, 26% and 27% ❤️ I will also be submitting a sample for the 2023 Grow Cup ran by 34 Street Seeds, along with my other grow, Zkittlez x fpog also by 34 street seeds. Thanks for stopping by 🇨🇦👊❤️

This week we did a major defoliation and lollipop on the girls. We also switched to Bloom A & B with a PK booster 3ml/gal of each. Over all I'm excited to see as they just started flower and look amazing. I bumped up the co2 this past week up to 750ppm. I can't wait to see the flower progression through the next few weeks. Happy Growing.

Hey guys, this is a mixed run of some of my girls from my last run , and some new from seed . Keep a look out for this one it's in first week flower 3 blue gelato clones barneys 2 growers choice watermelon punch seed 4 terple inhouse genetics clones 2 platinum gushers clones inhouse genetics 1 wedding cake limited edition seedsman clone

Hello everyone week 3 of flower has passed for this Vanilla Latte auto 🍼 Same feeding schedule Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

Goingto start LST this week everything is going well 💯 HAPPY

i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry

So these are 2 cheese plants, one goes in 12 liter airpot and the other goes in autopot when it arives in the mail

Das Wachstum ist diese Woche richtig gestartet…. Sehr gute Entwicklung, ich bin zufrieden Tage der Keimungsphase = 5 Tage. Tage in Wachstum = 21 Tage Wachstum h = 3 cm (nicht aussagekräftig wegen LST) 2 mal in dieser Woche mit Purolyt Mischung 1:25 besprüht Lichtstärke: 55 % PPFD: ca. 450 umol Lichtabstand: 35 cm Std Tag/Nacht: 18/12 Temperatur Tag: ca. 26 Grad RLF Tag: 65-70% Temperatur Nacht: 21 Grad RLF Nacht: ca. 65 % VPD Wert: ca. 0,7 PH Wert Wasser/Düngelösung: 5,8 EC Wert: 1,6 Ventilator Oszillation: Stufe 1 Befeuchter: an Entfeuchter: aus Zusätzlicher Entfeuchter: 0 Stk. außerhalb vom Zelt im Raum Bewässerung: 4* bewässert mit Wasser/Dünger mit den o.g. Mengen Purolyt Besprühung: 2 mal Controlling: Grow Control Dünger: Plagron Coco Licht: Pro Emit Vollspektrum Abluft: EC Carbon Active 750 m3

Sprayed some Silicum Boost this week. Good strong smell. You can also follow me on instagram: Dutch_Grower