She has been chopped!!! Now we will be back in 10 -14 days depending on how trimming goes. That’s the part I hate the most. Probably will pick up a trim bag been seeing those puppies around and seems like it could be a good accessory to have. Thank you all

This plant is going to be the heaviest yielding other of my purple trainwreck plants. Super excited to see what this plant will do. I was able to get the second PT clone to turn semi-purple on the bud, trich’s were better and smoke seemed to be about 2x as potent as the first grow. I’m not sure what kind of potency this third plant will have but I’m hooping for good things. She flowered early on me instead of during 12/12(started throwing pistils) so I may have her flowering date off by a week or two. I think I stressed her into flowering by drying her out too much in veg. Regardless, I’m excited to see what she does. So far seems to be the healthiest PT I’ve been able to grow. Thanks for reading and happy growing! 👩‍🌾🏼🌱

I'm excited to start a new season! Hopefully the weather gets as god as last year. Have found some new also very nice spots. Stay tuned an keep growing! 👍🏻

I do not know how much the outcome is cause i have to harvest the lower part of the plant i think the tottal amoint will be around 90-100 gr. I highly recommend to all auto flowering growers ro grow this strain. She can compet with photoperiodic strains and she will eat them with their shit!!!! ))))) UPDATE: as i told u i left lower buds to rippen and now it was time to harvest i got extra 25 grs so totally it was 90 gr of dry weight now its ready to cure

18.1.25: Gorilla 🦍 Cookies 🍪 is firmly in week 2. The plant is looking very good, sturdy. I have been feeding with about 200 ml of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Bio-Grow ♡ 4ml Biobizz Fish Mix ♡ 2ml Cal-Mag and ♡ 1/4 g sprinkling of Ecothrive Biosys. Trying to give the extra boost of Nitrogen to keep vigorous growth, and maintaining the nice lush green 💚 Cal-Mag was used from the beginning of this week. Thanks for checking out my diary 🍃 ✌️

60 days into flowering now, pulled 2 of these girls 7 days ago because 1 had a few bananas on it and the other was stressed to much from light and not really giving any quality bud and it was stretched out taking up lots of space. The 2 left have been flushing a little over a week now and are very close to harvest. I will prob harvest them sometime this week. Everything is going good so far anyway for these 2 and we will hopefully get some nice dense buds, we will see. Cheers💨 Day-62 update Found my microscope! Got some picks up of the tricombs up now, and as I suspected they are not quite ready yet. There are a few amber but I’m still seeing clear ones, but there mostly all cloudy now so I’m thinking another week or so will probably do it. That will give me a good 2 week flush as well. I got some pics and a video up as well just before my lights came on so there better then under the HPS anyway. Lol cheers💨

Ho sperimentato per la prima volta il fimming su una pianta credo sia riuscito sull'altra mo pare di no. Non importa tutto fa esperienza.......poi adoro sperimentare🤪😉🤪🤪🤔

😶

On day 1 the rez is at 6.2. The highest cola is 8.5" from the light. On day 2 the rez is at 6.2. The highest cola is 7.75" from the light. On day 3 the rez is at 6.1. The highest cola is 7.5" from the light. On day 4 the rez is at 6.3. The highest cola is 7.125" from the light. On day 5 the plants are smelling and doing well. On day 6 I changed out the rez and PH to 6.1. The highest cola is 7" from grow light stretch is deff slowing down and should be over shortly. My avg PPFD at canopy is around 800. On day 7 the rez ph is 6.0. The highest cola is still 7" away from light 😅 close but not too close in my small space.

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...

Day 1 Week 10. Added AN Big Bud to the feeding as per Advanced Nutrients feeding calculator. Still fighting to keep the stretch under control. And the RH is hitting 80% leaving the door partially unzipped. Ordered a small Dehumidifier to help. Changed the cover picture in celebration of an election. Day 3 week 10. Added a dehumidifier to help bring the RH inline. Sofia and Claudia are starting to show their flowers. Happy girls make happy grower. Day 5 week 10. Each morning a defoliation, and the next day grown in again. The girls have grown enough to see where they are joined from their single seed.

8 weeks old now! The harvest window is truly open... mostly cloudy trich’s and the pistils are over 50% amber on most plants. The cola’s are pretty large and dense, have mostly filled out as much as they possibly will. Harvest will be underway at some point over the next week so 9 weeks maximum for these Moby dicks. 👊😋

19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. I have removed all LST equipment from both PPP1 and PPP2. I'm going to let them grow up now, and I plant to implement a Scrog net, if they get any taller, which I hope they will. However they are most likely finished with their final stretch. My mistake, I went too hard on the LST. Thanks for checking out my diary 🍃 ✌️

Tout se passe très bien en ces premières semaines de floraison.😗Les plantes commence à exploser!🌱💣🌲 🌱ça pousse, ça pousse et ça continue de pousser. 👌 Intensité de la FC3000: 90% Ventilation : 2 ventilateurs oscillant ( ON 18/24H) + Extracteur 6 pouces mars hydro avec filtre à charbon. power : 4/10 ( ON 24h/24h) J'arrose tout les 5 jours avec 1.5L d'eau par pot. en ajoutant du Bioenhancer 1 fois sur 2 Merci à tout mes lecteurs ! ❤️️ Passez une excellente journée. 👨‍🚀👋 Mon Instagram ✌️: https://www.instagram.com/hou_stone420/

🌱 Week 3, Day 7 Update: Buds Are Blooming! 🌿 Hey Grow Fam, We're cruising through Week 3, and my girl is really coming on—buds are starting to form, and it's a sight to behold! The girl is growing so fast now, drinking 4.5L a day. She could even do with in-between waterings, in my opinion. She's aiming for the stars and shooting for the moon, getting bigger every day and stinking out my room. I had to tie my light higher up with some rope as it wouldn't go any higher, and shoots were getting way too close! I did SCROG when flipping, and I should've been a bit more strict on it (did it longer), but now I realize why SCROG is used. Imagine if I never used it—she would be way too tall. Overall, I'm so happy with how she is growing and can't wait to see the final product. :) But, as with any journey, we've hit a little bump in the road. Despite keeping our feeding consistent at 850ppm, the runoff readings have been creeping up. Last check-in showed a runoff of 1400ppm. It's got me thinking we might be dealing with a salt buildup in the root zone. To address this, I'm sticking with our feeding routine at 800-850ppm. If the runoff ppm keeps climbing or if our plants start showing signs of nutrient burn, I will adjust accordingly, but as of right now, I'm sticking to the same feed as she looks great! ( If I do begin to notice signs of nutrient burn (excess), I will try to water with a lower EC/PPM, like 700ppms, to bring it down. But if I don't get the results I'm hoping for, I will just flush the plant with 3x the media size of water (just plain pH water) to wash out any old salts and reset the medium. You don't really want to do this with coco depending on what stage your at in flower, veg on the other hand flush.? Sure!, if you really need to reset that medium go for it, (i do see tiny signs of burn but thats fine if it gets worse then i have a problem) Let's stay focused and keep our eyes on the prize—beautiful healthy buds. We've got this! #GrowUpdate #Week3 #BudsBlooming #KeepGrowing 🌱🌿

great cultivar by Compound Genetics. strong candy / grape smell. VERY easy to trim.u