Likes
Comments
Share
Giorno 14 Salgono le temperature ma le piante si sono riprese dopo il travaso e stanno bene. Sto cercando di capire cosa fare della Baker Delight 😀 ( lo scopriremo giorno dopo giorno). Se sei curioso segui il diario per vederne i progressi 😊
Likes
2
Share
Likes
7
Share
a few days ago the soil probably had a pH value that was too low.. this was shown by the fact that the plants showed a Calcium-defiency. I solved this problem by pouring hard tap water with a pH value of around 7 once. Now everything looks very promising. although we are already through with the third week of flowering, my biggest one has grown from 41 to 48 cm the photos were taken before watering.
Likes
5
Share
Que pasa familia, vamos con la primera semana de floración de estas GG4 Sherbet Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Vamos al lío, El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%, 7 litros de sustrato. Iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
17
Share
@igloo57
Follow
12/11 - Watered with just the FloraBloom. 1 tsp/gal. 12/12 - Just Peeked in. 12/13 - Looking nice and frosty! 12/14 - Nothing 12/15 - Gave them just pHed water. 12/16 - Out of Town 12/17 -Out of Town
Likes
3
Share
New week, new problem. The buds are getting too heavy and the stems can't manage much longer. I'm worried I might get a moisture problem as dense as it is. I'm definitely monitoring the humidity.
Likes
12
Share
July 5 Day 22: starting fourth week looking okay. I need to remember to not over-fertilize this auto. So far so good. July 9: above 32 C last two days. Spraying grow bag with hose water and foliar spray with seaweed extract and potassium silicate to help beat the heat. Watered with a bit of compost tea. July 10: still hot but we’re past the peak of the heat wave now. Chemdawg seems to be doing alright.
Processing
Likes
11
Share
Well all these ladies had a major growth spurt. My lights are at the max height now so I hope they are done. Good news though the Gorilla zkittles and Red diesel are showing bud forming, so hopefully I can count on them to be done stretching now. Started them I defoliated pretty good on day 7 I started them on the rhino skin once I got something to keep it turning in my reservoir. I also top dressed 1/2 cup of compost mix and hit them with a light top feed of recharge. Looking forward to seeing these ladies pack on weight in the new few weeks.
Processing
Likes
12
Share
Que pasa familia. Noticias buenas y malas, de 3 ejemplares, uno nos salió hermafrodita. Empezó a formar plátanos esta semana y al estar tirándolos en ramas distintas, cortamos por lo sano y ADIÓS. Quedan 2 subimos cantidad de comida, pegaron buen estirón, y las flores están formando sin problema alguno. Dejo muchas imágenes y vídeos de esta semana, y ya deducen ustedes.
Likes
5
Share
Flowers are starting to form and I’m just watching these closely because it’s my first time running them and I’ve seen a few people have issues with herms
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.
Likes
24
Share
White Truffle x Red Pop by Detroit Seed Co BuildASoil 3.0 LOYAL TO THE SOIL Strawberry truffle | Vivosun 2x4 | Mars hydro sp3000 | 7 gallon pot Chem 91 x Red pop | AC infinity 2x3 | AC Infinity Iongrid 24 | 5 gallon pot
Likes
20
Share
9/27 - start day 43 - So, the other day, I tried running the thing sealed at 1100-1500 ppm and temps got to 95 with RH at 75% and the walls were straight sweating nuts....dripping...puddles.... that tiny dehumidifier wasn't doing jack. Since, I have managed to tap into the central ac with some makeshift ducting, which now supplies my spot with a nice cool, dry breeze every so often. With this, I have managed to maintain a temp of 88-91 with a RH of 37-50% at 750-950 ppm. I can keep the 750-950 ppm with a flow rate of about 1 cfh, which only goes off roughly 10 minutes every hour. probably will try it and run the temps a little high. ya, can't seem to stay consistent. i swear, it'll stay at that ppm after it all leaks out and the surrounding room is sitting at the same ppm maybe, lol … should probably drop temps and the co2, but hey, might as well gas em out while its there …. hey, maybe they'll return the favor and gas me out after harvest😁 that little square light looks like it should be lighting a lizards cage or some shit …. I swear the thing probably only pulls 30 watts, if im lucky. It didn't come with a book or directions or any type of specifications.... said 3000 watts,....id give it 30. If that's the case, im banking on the other 2 lights to cover that little red spot. Oh, and those little side lighting things suck. the stupid remote/timer thing is ….. garbage timer thing 9/28 - 44 - I tossed a HID in there for a bit for the hell of it....I really wasn't digging the "reptile light", but its still in there. I went ahead and tossed a window ac unit in my "window". it was again TOO warm with the HID cooltube and all. Was hangin around 94-97 degrees!!!! ac there, now I need to make some makeshift ductingand vent the ac exhaust outside
Likes
3
Share
I freaking love this plant. She's got dense buds already but she's throwing out pistils like no tomorrow. I'm curious to see how much bigger she's going to get in the next few weeks. Only a little over halfway done. She's already having trouble staying up right. I'm having to balance branches on other branches and using the ratchet hangers to keep the mains upright
Likes
9
Share
@Mo_Powers
Follow
not much happened this week. there was a lot of sunshine. a few stormy days and some rain. she is still doing well and is growing steadily and the flowers are getting thicker. she is now also getting biobizz top-max
Likes
17
Share
@Mr_Pgrow
Follow
What can i say, a fantastic plant, responding well to this organic grow with no hiccup so far. This week i tied down the lower branches using LST method and also tucked in (not removed) some leaves that where blocking good bud sites Thinking i might apply a Scrog in the next week or two for added support. Again watering when needed, 2L every second day or so.
Likes
9
Share
@Budhunter
Follow
Stardawg looking promising 😍 smell profile that I loveee 😍
Likes
46
Share
@Jloux
Follow
11 mars Tous va bien ! Juste la "Lemon Garlic Og" qui montre signes de un peu trop d'engrais sur le bout des feuilles.(pourtant j'ai arrêté l'engrais bloom en mineral pour le passé en organic) Sinon elles vont bien ! Elles sont un peu fine, ça manque de volume (je vais remédier à ça en ajoutant du "PK" d'ici 1 a 2 semaines). J'ai posté 2 vidéos et des photos de chaques variétés. Sinon j'ai pas grand choses à dire. Ca brille-brille, ça sent bon ! C'est sur la bonne voie pour une jolie floraison !
Likes
6
Share
This gorilla cookie by fast buds is freaking awesome guys, I'm really in love with this genetic, very strong smell, trichome glands everywhere, and 2 out of the 3 plants that I'm growing are going to develop full purple buds!! Amazing autoflower plant man, I'm not disappointed at all, I hope to get a nice amount of buds with the 3 Gorilla cookies because I cannot wait to taste those buds! Let's keep on working! 💓💚💛👨‍🌾