This week I will maintain the same techniques from previous week. Noticed that main leafs got bigger during the weekend, both plant look healthy and happy and are now looking wider. Also to note that I have been rotating the vases so they catch light in different positions/sides. It does not replace the real sun movement however it will stimulate the growth in different parts of the plant. Hopefull by the end of this week we will have a new set of baby leafs.

Planted in 25L Pot with pre-fertilized compost soil and a little bit of coco, perlite and little pieces of old woodsticks. As a fly protection i use spiders and there web to solve this problem because thats the only one i have. So when you see in my tent, webs and the little bit of soil on the bottom what keeps the tentfloor dry and is also good for the spiders, please keep that in your mind.

This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.

Que pasa familia, vamos con la sexta semana de floración de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. Y también superaron el shock por el trasplante se recuperaron 100%. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El fotoperiodo esta a 12/12 para floración. Las jodidas estiraron bastante, y es algo que no me gusta de todas las F1, que cultive hasta ahora. El olor que desprende es muy peculiar es muy dulce y empalagoso, a mi parecer, no pinta nada mal. Hasta aquí todo, Buenos humos 💨💨💨

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan), quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Well there is a reason why there was a lack of updates... Unfortunately it seems like I didn't clean my tent well enough and I also didn't change the carbon filter. I changed both of that (hopefully)... at least the carbon filter is brand new. #2 had to leave and #1 is also gone. After a few days of being down and not caring so much about the plants, I placed the King's Juice Auto #3 outdoors and hope that because of the topping, she is still so early into flower, that she might've not been pollinated from the last run. She will be placed back into the tent tomorrow and let's pray she wasn't pollinated already and let's pray I cleaned the tent carefully enough.

Week #11-July 27-Aug 2 8/2-The top colas are ready to be harvested. Lot of amber trichomes now and I'll cut those and then lower the lights to let the middle and lower buds get a bit more ripe.

Flowering Week 20: Structural Surprises & Purple Promises Update: 28.07.2025 | Day 143 Hey Growmies, Apologies for the radio silence! Between vacation and kid adventures, the diary took a backseat. But the ladies? They’ve been busy. Here’s the catch-up: Emergency Support Mission - Durban’s weight crisis: Side branches cracked under their own mass – one even split the main stem! - Field fix: Stabilized with 4 stakes + speaker wire (ugly but effective). - Lesson learned: Next run = heavy-duty support before stretch. Strain Check: Durban Poison (African Queen) - Growth style: Less height (expected 2m+), more lateral explosion – new shoots daily make her look like 3 plants in one. - Flower status: White pistils stacking at branch tips. - Smell: Still discreet (neighbor-safe… for now). - Health: Vibrant green – zero stress signs. Blueberry - Surprise stretch: Nearly hit 2m (like a sativa!). Half Durban’s width but elegant. - Stem power: Thicker trunk than Durban – mini-tree status. - Color preview: Purple stems emerging! Buds may follow suit (fingers crossed). - Support needed: Prepping for heavy buds to avoid branch snaps. Care & Environment - Feeding: Pure Bokashi juice (no extras) – they’re thriving on it. - Pests/mold: None spotted. Dry summer helping. - Weather: About 20° C and really high humidity. Next Steps - Build 4-stake + twine support grid (multiple height tiers). - Monitor Durban’s odor spike as flowering advances. - Pray to the mold gods for a dry autumn (purple buds = mold camouflage). Week 20 Takeaway Never underestimate the weight of the branches and the effect of a little strom. I could possible fuck up my grow. Alright folks, as always: Catch y’all next week – no more hiatuses! – Smoking_Joe_Frazier

Flushing going g very well so far.

So week three of flower is looking good. Optic 1 XL is really helping the flower bloom. I started using beastie bloomz and I stared to see the blooms come out by mid week. What I thought was a nut burn was lack of calmag. I just started to double the dosage. One day the full line of the go box the next day I’ll do full dosage of base, calmag, and a full dosage of beastie bloomz. Seems to be working out fine. Smell is starting to kick in. I love the smell of it. I can only imagine how it’s going to smell when ready to smoke.

So far so good i have to defoliate sligh

Good

This week has gone well again. All plants are in flower now 3 I would say are a week behind the others. Ztrawberries without doubt is looking like the busiest girls with each day presented new changes in there grow the terps are starting to come through abit now, all smell amazing and it will only get better!! This week increased EC to 1.8 and plants are reacting very well not really had any issues as yet 🤞🏼 Ztrawberries seem to have stopped with the stretch ranging between 130 to 100cm, Tropicana cookies are between 120- 100 but one is still stretching and Cherry cola seems to be having a little stretch at the minute at 80cm but still going ✌️🏽

Week 8 Flower The last week of flush for these two. They were taken down on Day 56, after a 16 Day flush. I think Twin2 could have finished at 7 weeks, but of course I hadn't planned for this, or I would have flushed sooner. So she was taken to the originally planned 8 weeks. Twin2 has also foxtailed quite a bit, from only slightly higher temps and also because she's having a last attempt at catching any pollen in order to reproduce. Although the pots were slightly damp still when I harvested, it is best to take them down when they're dry. The only reason I didn't, was because I knew I'd be too busy the next day, and there were plants in veg that were desperate to be thrown into the flower tent! The pics do make them look wetter than they were though. Their fan leaves were taken off and they were each hung in seperate boxes, where they'll dry as slowly as possible for between 6-10 days. I dont suffer with very high humidity, so I'm able to do this without any issues. When I feel it is too humid, I simply burp the box for the first day or 2 once a day. The slower the dry the better the buds will taste/smell. Once she's dry enough she'll be trimmed and jarred for curing. It's going to be a pretty tough one for keeper pheno! They both have similar but very different smells. By that I mean, they both smell very floral and sweet, but T2 smells extra sweet (although definitely not as dense). That doesn't mean T1 doesn't smell just as nice. Hers buds are thicker and more dense, so even though I've favourited T2 in the pics, I think I'm leaning towards T1 still. But in all honesty it's still down to dry weight and the taste test! This can all be looked forward to in the harvest update! It's been a seriously fun diary with these two twins. I'm definitely glad I separated them. Do you think you'll attempt to separate them after seeing my experience? Please let me know! Thanks for following and happy growing! 🐺

So as you can see, we have upgraded into a 5 gallon wide fabric pot and I'm going to give her another couple weeks to fill into her new home... i broke a couple of branches, definitely gave her silica to early on.. I'm not used to keeping plants in veg for this long... i do think when all said and done, she's gonna be a beast, so it'll be worth it... Thanks again @Grow4releaf!! Happy grown everybody God bless ✌️

Heading into week 5 of flower is looking Great! Sitting at 4½ weeks into flower. My under canopy LED lights will be here in 3 days, so the grow will have them running fpr the last 5 weeks or so of flower! Let's Gooooooo!!! Grow on...grow on!

the strain is really strong , low temperatures resist , 3 weeks around 12/16º graus and steell growing wel nice new colos between week 4/6 in flowering. really good strain to manipulate! 5 stars * * * * *

On flush regime, water only, no nutrients, only a soil cleaning solution. Still has some clear trichomes, a few milky and no browns. Guess it has to flower 1 or 2 weeks more. Full history of the setup on week 1.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍