Day 29 of flower.

No problems this week, plants growing extremely well. Unfortunately, I was not able to set up a drip system yet. The only training I did was to tuck the fan leaves a bit, next week I will start LST. I used a foliar spray this week in the days that I feed the plant. DAY 22 - Nutes PH - 6.04 Solution Temp - 20 PPM-1500 Watering Volume per plant - 3L DAY 25 - Water PH - 5.92 Solution Temp - 20 PPM-570 Watering Volume per plant - 4L Plant B is about 20cm Height and Plant A is about 22 cm Height.

End of week 5, repoted this week, can't wait to see how they grow in these pots! I installed a heater and the temperatures are much better now. Only watering for now, was watering with just a little water before transplanting. The big pots I watered weekly with ~2L water and spraying the top layer every now and then to keep it moist. I gave a little more water today as they moisture probe was telling that it was still dry after 2L. So ended up watering each pot 4.5L of water with the plan of not watering for another 7 days. I think all this much is affecting how much water is flowing down (or my probe is broken :D ) We have an aloe vera plant which I am cutting leaves from and squeezing some gel out into the water. Hopefully they will get over whatever caused these drooping leaves quickly. They seem to be on the mend.

🤗 Hi fellow growers. We are back here to harvest the Northern Lights Auto from Seedsman. She took 11 weeks to finish flower and a total of 15 weeks from seed to harvest. 🌱Growing her was a little tricky as she was finicky at the beginning of flower. She wasn't the fastest auto but she put on some tall colas with some fair amount of resin smelling of sour stone fruit such as a plum. Chopped her down then dryed for 14 days in a environment controlled room. Then began the trimming process. After a nice manicure the plum smelling buds were then placed in a jar to set cure for 30 days. There was quite a bit of larf nugs on the bottom skirts that I should have trimmed off during the flowering cycle but sometimes I like keeping them to press into some rosin before my nugs are cured. I find that pressing the flowers with in the first week of the curing process produces the best quality flower rosin In the end I'm left with a gram and a half of some beautiful Northern Lights flower rosin that tastes and smells like a sour plum and packs a big punch. About a 10% return so not the greatest yield but it sure is some high quality rosin. Keep it mind it was the larf flower and I press at 180°F to preserve as much flavor as I can. I'm after quality and have been achieving that. Effects - Relaxing, calming, Happy Yield - 68 g nice nuggets 14 g of larf that went to rosin Smell - Sour plum Forrest Taste - Skunky plums

El inicio es sencillo, la 10th planet se come los nutrientes más rápidos que el resto del ciclo, la Purple majik por el contrario, se tarda un poco más en secar el sustrato pero su desarrollo es rápido.

So at this point this plant is my mad scientist project. I have clones it, super cropped it, and now I’m main lining it. I’m surprised it’s still alive but I guess it’s good I pulled so many clones. Looking forward to seeing how it heals and what it does on the rebound

Here we have a strain that has had great success in recent years and the Zamnesia one already has a great reputation among growers. We also have Green Crack F1 Hybrid 2 plants but I'm showing you the other one in a separate diary now because it is even smaller than this one that is already in advanced flowering, there are many buds growing and we hope they swell well. The structure created with mainfoldindg, mainlining, topping and lst vari is very pleasant, the plant is at medium internodal distance and flowers quickly so it is a plant on which I would feel like recommending these techniques that it is true that they can slow down the harvests but they give a satisfaction to the sight and an unparalleled fun in making them. We are still using soil, fertilizers and all the additives recommended by Plagron 100% organic. With her We have switched to the late flowering program that wants the additives Sugar Royal, Pure Zym for another week and adds the flowering stimulant Power Buds and the myth Green Sensation. Obviously the basic fertilizer is now Alga Bloom. ---- Decide on the right soil and calculate your fertilization program based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/10677-zamnesia-seeds-green-crack-f1-automatic.html Zamnesia Description // Forget what you think you know about cannabis. Green Crack F1 Automatic by Zamnesia Seeds is here to shake up the entire industry. Using F1 genetics, growing cannabis has never been easier. These plants offer uniform and abundant yields. Get ready to harvest high-quality buds, full of flavor and amazing effects. All the best that mother nature has to offer is at ---- www.zamnesia.com

Semana 13 abril - 19 abril 14 abril - feeding day para as duas. 18 abril feeding day cheese #2(2l): Calmag 2.4ml; bio bloom 9ml; topmax 8ml; bio heaven 10ml; acti-vera 10ml; bio grow 8ml pH 6.5 20 abril feeding day cheese #1(2l): Calmag 2.4ml; bio bloom 9ml; topmax 8ml; bio heaven 10ml; acti-vera 10ml; bio grow 8ml pH 6.5

Everything stacking up nice. Keep removing some tiny buds that will not develop. I need to get a dehumidifier. and another 2 - 4" Fans Starting to smell super juicy. Not allot of gas mostly lemon and fruit.

These 2 have really made a terrific canopy. Just rows of colas that are stacking right up. Buds are getting much more structre and character to them. Trichome and resin production is really kicking in. Earthy skunky aroma kicking from em so far. The tops are getting nice and solid... gunna have some great density here. I reduced the nitrogen dose again. I also stopped giving them vigorous. Its a pure bloom mix now as these ladies are booming with flowers. Until next update. Happy growing and stay lit fam.

It's time. The trichomes have clouded over, a milky haze obscuring the clear heads. The smell is faint. Very herby of thyme and salvia. The buds are small and round.

4ta semana de floración, muy buenos resultados hasta el momento obtenidos! Espero que les guste!

Plant has been recovering from HST and LST still haven’t seen signs of flower apart from the stretching of branches and side branches hopefully as the week goes on I’ll start to see pistols start to form and a switch in development will keep the diary updated more secondary side branches stretching off the first set of side branches hopefully next week I’ll start to see flowering signs

This is the whole flowering cyclus posted in one week.

Chance of a Lifetime Greenhouse Seeds Wonder Pie Week five 5th June 2020 Welcome back to my Wonder pie Diary for the Greenhouse Seeds Win a trip to amsterdam Contest. It's been a busy week for the three plants. I waited until aprox mid week (Tuesday 2nd June) to begin some LST And each plant proved to be tricky in one way or another. Plant 1 has very flexible branches that I needed to use tent pegs on to hold down each branch I wanted to train. Plant 2 is very bushy and has quite a few side branches happening so I managed to tie down atleast 6 with some soft wire and left the others to grow a bit longer before I try more LST. Plant 3 was the trickiest because the branches are very stiff and not very willing to bend . I found this out by accidently snapping a branch off. I managed to tie a few down but have the two main branches still growing vertically for the time being. (Wed 3rd June ) Not touching them today and will water tomorrow (Thurs 4th June) Watered each plant with 2 Litres of Water (Friday 5th June) Today I am very happy with the way they responded to the LST all three plants have really bounced back well and look super happy. I have been playing around with a homemade CO2 producer which is very easy to make with household items. Basically I re-used a 1.5l empty water bottle as the container. Then I simply punched a small hole in the lid for the CO2 gas to escape. I then added aprox 7-10 teaspoons of Sugar & half filled it with nice warm water (not too hot) and let the sugar dissolve. Then I added 3 teaspoons of Bakers Yeast and gently shook it all up before placing the lid with the hole in it back on the bottle and placing it inside the Grow tent. The principle of this is that the yeast and sugar react with each other to start "Fermenting" which causes the release of gasses which are made up of CO2. Now whether or not this does anything to make the plants grow any faster is conjecture on my part but I have noticed that the plants look very healthy and growth has been more this week than previous weeks so who knows????? It's worth a try if you have the time and inclination to try it. Well that brings me to the end of this weeks Wonder Pie update. Thankyou very much for taking the time to Read it, I truly do appreciate the kind words and likes etc and I shall be back next week with another. 👍

Probably I should wait another week or two, but I decided to harvest tomorrow. I afraid of possible mold due to high humidity and temperatures... The trichomes become milky and some of them get an amber color.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/15/22 😻Week 5 of veg and things are looking good! I didn't know how I wanted to train these so my husband's suggested we top 2 plants and low-stress the other 2.. I went a little too heavy with their last feeding, no burned tips yet but 2 of them are very dark, we'll be doing water only for these this week..there is some minor discoloration on a couple of the lower leaves nothing major but something we're watching..we'll update again midweek..thanks for all the love Growmies ❤️🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/18/22 Things are good 😺👌..New growth seems to be coming in fast on the 2 plants we topped...much faster growth than we've seen up to this point..all plants seem happy and all have a great color (after working out my slight overfeeding )..we've been running the MarsHydro near the top of the tent the entire grow as a test and its still more than adequate. .we don't have a light meter but we do have some crazy tight node spacing to confirm lol...I still say these plants are a little on the small side but they seem to be growing faster now..I'm pretty sure leaving them rootbound in cups didn't help their development...I think they're finally becoming adjusted to their new homes and we'll see some explosive growth in the coming week 💡🌱... fingers crossed 😺🤞 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 01/19/22 AHHHHHH!!! I DID IT AGAIN!! Kicked my timer power after watering yesterday and put these into about 14hrs of darkness 😥.. lights are back on, hopefully they didn't notice lol.. ah well these things happen and I'm sure they'll be just fine ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~