Likes
Comments
Share
Welcome back at week 2 of White Label White Skunk Automatic. This week was not much going on. The plant is getting new leafs and so far, I can’t see any mutation according to newer leafs. But it’s still very tiny and grow speed is slow for an automatic strain. Maybe it’s still an issue with my setup ? Growing progress is slow but steady. First leafs have a yellowish Color but the plant seem to be healthy. Keep in touch ! Cheers, HighZenBerg
Likes
31
Share
There we go, now the diary is all sorted out and the weeks are accurate. Pistils still poppin'! Starting to get the first few brown pistils to show up on the low low plant buds. Tops are still filling out. I might as well raise the dimmer to 10. It's been on 9 about 11 inches from the tops of the plants. I dialed it back to perhaps reduce the stress from the hot dose of nutes. They burnt up pretty good but still rocking! Hopefully the next run i can keep them pretty for the full crop! haha The Nutrient mix i listed is not a feed chart regiment. I've had to dial it back a bit because of the high ppm of my tap water which caused me to give them a hot 2500ppm feed one day and they freaked out lol. So now i test my ppm and i try to keep it around 1000, to 1250ppm MAX Next crop I plan on doing some experimenting. I'm going to grow 3 strains. I want to do a diary for each strain and I'm going to experiment with some different nutrients (Remo Nutrients) and I'm going to do side by side comparisons with Hygrozyme and HygroBen, as well as Resin by Green Planet Nutrients. Next Strains will be; #1 Female Seeds "Lemon Kush" (2 plants) Clones #2 Barney's Farm "Biscotti Mintz" (3 plants) Clones #3 Expert Seeds "Oreoz" (3 plants) Clones 1 of each plant will be treated with Mykos Fungi, Hygrozyme Enzymatic root enhancer, and HygroBen which is beneficial bacteria. So we can draw a side by side comparison of each treated vs. non treated plant to see if Resin really does increase resin output, and if the plants health, vigour and growth are affected in a significant way. These plants on Oct 31, are 42 days into their flowering cycle. I expect them to finish near end of November. Nov 15 i will cut clones off my mother's and prepare for the mid winter run.
Likes
59
Share
@TruTraTri
Follow
*mumble* missing looks *mumble*.......😹 so sad about this 🤣 Positive .... last two weeks they really fattened and hardened. Didn't expect they have so much juice left. 💪👍 Negative ... too tiny indoor and ScrOG so the beautiful colors are hidden almost all the time, not beautiful with my LED combination and not accessable 😅 - seems like I have to random hate ScrOG if I don't cry about... .... 👽 *mumble* Already mentioned - but stinky AF and sticky. Early harvest would be possible for all and I think Kai is ready to go. Nonetheless, harvest is no joy for me. The more smell and sticky stuff (I later enjoy of course😜), the faster I get super annoyed 😂. So I am just trying to harvest sometime in the future but not today... same is true for tommorow😹. Think nothing good or bad will happen anymore. The leaves are not completely dried out or lush - they must live what is left in the soil and in the leaves. - Wattage 220W down to 190W - One week at max till harvest - hope some people get inspired to watch this exquisite series (Lexx).. 😈 Outlook: - final week for GD - harvest + curing - 3 months - harvest week for gd + smoke report. “I feel good too, captain - and I will feel even better when I eat that little tiny snack ahead of us.” — Lexx “Our journey will be long. The chance of mechanical failure over such a period is not insignificant.” — Kai “Good. Well - I guess this is it.” — Stanley Tweedle “Well - I wonder if the Dark Zone is ready for us?” — Zev Bellringer
Likes
5
Share
@Del_grow
Follow
Not a lot to report which isn’t evident from the pictures. I did build up the remaining three strains to the same height as the tallest they’re getting between about 750-1200 ppfd in the centre, which seems a lot but I am supplementing C02 and there’s no signs of light stress or burn or even foxtailing so I guess these girls can take it! They’re fattening up still, always hard to tell how dense the buds are but the Gorilla Zkittlez looks like it’s gonna be the heavy yielder and might just be a touch behind the others for development. The Peanut butter cookies is still getting fatter but seems the other end of the spectrum and may be ready to finish soon, although she’s still putting out new pistils, pretty purple now too. The Tahoe OG looks right in the middle, packing on a bit of bulk now and the bud structure looks really neat and tidy. Then finally the Runtz muffin, I carelessly snapped off a top bud when defoliating last week and dried it up and it’s 🔥 already so looking forward to this one maturing properly. I forgot to put that I’d been feeding molasses for the last few weeks, just to feed up the microbes and see if it’s of any benefit.
Likes
120
Share
Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grows First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable theme in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. I am very excited to see how the new growroom will work and how this CBD Fast Eddy plant from Royal queen seeds will turn out. CBD Fast Eddy Automatic is combining Cheese x Juanita la Lagrimosa x Ruderalis, Fast Eddy is a rapid growing, flavourful, and CBD-rich auto strain that goes from seed to harvest in 8-9 weeks, produce generous yields, and induce a clear, mellow, and most importantly, functional high. THC: 9% CBD: High Yield Indoor : 400 - 450 gr/m2 Yield Outdoor: 80 - 130 gr/plant Height Indoor: 60 - 100 cm Height Outdoor: 80 - 120 cm Flowering: 6 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Cheese x Juanita la Lagrimosa x Ruderalis Type: Sa 50% In 40% Ru 10% Effect: Clear, Painrelief Climate: Mild ----------------------------------------------------------------------- 2017-09-25. Week 5 starts. Added a video of the girls. Gave the girls water and nutrients. The beautiful girl is 41 cm high and have grown 5 cm in 7 days. I flushed the girl yesterday with 40 liters of tap water. Im lowering the humidity in the room with a dehumidifier and try to have 50% air humidity. She looks great and starting to bud up. ---------------------------------------------------------------------- 2017-09-29. Installation of the New light rail in the grow room. Its Advanced star light V 5.0. Added a video of it.
Likes
20
Share
@Lazuli
Follow
The smell is really strong now she doesnt put on more weight She got flushed 5 days ago and will be harvested in 5 days. EC 0.6 only ripen PH 6.2
Likes
27
Share
Let’s Go day 29!! This week went real nice ! Girls are staying very healthy and building up nicely and even started showing signs of female sex which is super great ! We started doing a little bit of leaf tuck training method on em , nothing to big as like I said I want these girls just to do there thang an grow more on naturally side! My Air temp and Humidity have been on point all week, staying from 70-75 degrees throughout the day and humidity staying around 58-61% humidity , my girls are loving that summer an 75 feeling !! Can’t wait to see what we do this week ! Hopefully you all enjoy, and are ready for another great productive week ! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Happy Grows✌️🏻Week 4 let’s get it !
Likes
14
Share
Great strain...will grow again for sure! This plant was easy to grow and produced some great buds. Great strain for a low headroom grow area. I would love to grow some more Sweet Seed Auto strains 😊
Likes
14
Share
@Fre_84
Follow
It was my first cultivation. I learned a lot and will learn a lot more with the next ones. I understood that intervening on the plant requires a certain experience. In fact, of the three plants, this is the one that has grown best (and has not received any intervention). Easy cultivation ... great result!
Likes
35
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the Update 😃. Flowering day 42 since time change to 12/12. Hi everyone 😀. This week you can see how she puts all her energy into the flowers ☺️. They smell better from week to week 👍. This week it was poured twice with 1.2 l. 1 g enhancer per liter of water was added. Otherwise, like every week, everything was checked, everything was cleaned and refilled. Have fun with the update. Stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/3271-zamnesia-seeds-blue-dream-feminisiert.html Type: Blue Dream ☝️🏼 Genetics: Blueberry x Haze 20% Indica / 80% Sativa 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
1
Share
So it's time to harvest Russian machine guns. The plants were high because we pulled them with a lamp and did not use LST. The final product was removed on the shelf of the refrigerator.00
Likes
92
Share
Day 60....I've set them free from LST and I'm gonna give them plain water tomorrow..can't wait this last 2 weeks to go. As it is my first grow, i am already happy by getting closer and closer to harvest...can't really wait for the cure and the final results.
Likes
29
Share
Was such a pleasant harvest from start to finish, no issues at all. A tip for next time would be to have the SCRoG lower as I couldn’t really tuck any node sights this time round, smells absofuckinglutely amazing from 3RD week bloom onwards!
Likes
15
Share
@TAXFR33
Follow
This grow is on it’s last lap 🏁 These are by far the most beautiful buds i have grown and would definitely recommend fast buds genetics to anyone. Can’t wait to try these now. Last week i said i was starting the flush but decided to push it back to this week so they only have 1-2 weeks left Will be checking the trichomes daily Let me know what you guys think so far👌🏾🤞🏾
Processing
Likes
16
Share
@GrowZex
Follow
Hello beautiful people! First week of flower. The girls are doing well. I had kind of a scare bcs one girl was showing some balls but most balls are shooting pistons, so my guess is that everything is going to be fine. Im doing 2 stage lollypopping and just did the first stage. Will do another session this weekend and be done with it. Its very clear this strains is more sativa leaning as we all know very well with Sour D. I have a very good feeling on this grow. Probably bcs i love Sour D so much. Rly curious in how this Zamnesia variant will perform. Thats it! Love & Peace 4 all!
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 13/12/2019 - Change the light schedule to 12-12h after 8 weeks of no signs of flowering I think is a photo not and auto. 16/12/2019 - Fed her 1.5l of 6.5PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed about 10% run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). 17/12/2019 - Did some defoliation on the lower branches mainly.