Moved these girls into the flower room at the end of this week.🌺 Gave them their first week of bloom nutes. 💉

Buenas a tod@s... En esta tercera semana( que yo creo q sería como la primera con estas alturas y x lo q son tan pequeñas, se pasarason a tierra más de lo previsto, espeigaron y doblaron tu tamaño y se pasaron a maceta grande) justamente hoy se le agregaron nutrientes, algunos nuevos y otros q ya había usado antes... Eh mantenido al margen las medidas NPK recomendables y eh agregado algo x ahí q seguro va bien 😉 la humedad es estable generalmente, la temperatura tanbm... De momento no hay ningún problema, están fuertes y van creciendo bien, no le podemos pedir mucho a estas alturas, eso para luego... La semana q viene mejor... Buenos huemos para tod@s... ⚕️😎 🇦🇷🤝🏻🇪🇦

Es war eine schöne Woche. Nur 1 Tag etwas Regen. Sonst Sonne satt. Sieht man auch. Alle Autos kommen gleichmäßig gut. Einige bilden schon Zweige. Und das in weniger als 3 Wochen. Läuft gut.

11/6 Fed and watered. Each took a full gallon. 11/8 They are really drinking up the water. They were dry already so I watered each with a full gallon. 11/10 Watered each with a full gallon 11/13 Watered and fed each with a gallon.

Great product makes growing fun

Dans l'ordre : Blueberry Dutch Passion Blueberry 00 Seed Blueberry PEV Seed Blueberry Bulk Seed Animal Cookies x Blue Monkey Exotic Seed Red Hot Cookies Sweet Seed DoSiDos x Purple Punch PEV Seed Purple Shot Exotic Seed

Day 18 veg from clone Water temp 69.6 Ph 5.9 Ppm 724 Ec 1.6 Room temp 66.8 Light temp 74.4 Humid in room 48 Over light 42 Day 19. Full flush. PT 1 Start ppm of RO (filtered/nestle) 146 Ph 7+ Final ppm 880 Ph 5.9/6.0 Temp 70° Room humidity 50% Light 45% Light heat 73.0 Room heat 68/70 depending on if heater on or off

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

Looks nice

🖐️👨‍🌾 Bienvenidos entusiastas de la marihuana clandestina y orgánica! Séptima semana de floración para esta planta grandullona, que no para de crecer, las enormes flores me están regalando momentos sublimes, la planta apesta con cada roce. HASTA LA PRÓXIMA... SALUDOS A TODOS! ================================ Info de la cepa Black Lebanon de Super Sativa Seed Club: https://supersativaseedclub.com/cannabis-seeds/black-lebanon.html "Esta es la Black Lebanon original que data de los años 80, una auténtica planta de Hash..." Super Sativa Seed Club - Genética: Landrace - Indica dominante - Tiempo de Floración - 09 semanas - Rendimiento en interior: 500 g/m² - THC: 20% - Sabores: Hachís, bayas, afrutado, ligeramente terroso ================================

Day 65 Mon PH 6.1 EC 0.1 DLI /11h/ PPFD/ Water 20 Day 66 Tue PH 6.0 EC 0.1 DLI /11h/ PPFD/ Water 20 Day 67 Wed Add flawless finish and soda for oh up PH 5.3/6.0 EC 0.1/0.3 DLI /11h/ PPFD/ Water 20 Day 68 Thu PH 6.3/ EC 0.1/0.3 DLI /11h/ PPFD/ Water 20 Day 69 Fri PH 6.0 EC 0.3 DLI /11h/ PPFD/ Water 20 Day 70 Sat PH 6.1 EC 0.3 DLI /11h/ PPFD/ Water 20 Day 71 Sun PH 5.8 EC 0.3 DLI /11h/ PPFD/ Water 17c

23/10/2025 18:10 20.1°C 55%RH After a very cold and rainy week today temperature raised above average,air is pretty dry and plants smells more than ever This strange hot day made hunters come back after a chill period with no shots in the background,also this time was really near my spot(i thought he was finding us😰)

PABLO ESCOBAR WEEK #21 OVERALL WEEK # 9 FLOWER This week she's looking good as she's getting close to the finish she's got some fade in her leaves and buds are dense as they run down the stem additionally she getting that frosty look to her!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU DIVINE SEEDS!!! PABLO ESCOBAR / DIVINE SEEDS

Ernte ist ziemlich nah, werde die Ernte in 3 aufteilen, damit der mittlere und untere Part nachreifen kann… Da ich die RH nicht wirklich runter bekomme und kein Schimmel riskieren will werde ich mit hoher wahrscheinlich das obere Drittel morgen ernten und direkt zum Trocknen aufhängen… Time will tell

Pretty loud terps. Smells great. Candy grape with a little gassy. Tricks forming nicely. Still no herms since defol. She handles stress nicely. This phone for the pack of seeds is a keeper I think, though I didn’t take clones.

This week marked the final chapter of this journey. After 17 days of sunny, dry conditions, the sudden return of damp, humid weather and low airflow triggered internal bud rot (Botrytis) deep inside the main cola. Despite regular inspections and careful care, it developed rapidly in the dense core. I removed the affected top to stop further spread, but it was clear — nature had made her decision. The plant gave her all and was already in the final ripening stage, so I’m grateful for what she produced. Lesson of the week: Even outdoor autoflowers can fall victim to mould late in flower, especially in humid coastal climates like Ramsgate. Next time, I’ll cover my plants during the final weeks to protect from dew, humidity, and stagnant moisture. Big thanks to FastBuds for a strong and impressive cultivar — this was a powerful pheno with excellent structure, trichome coverage, and strong medicinal aroma. The genetics were solid; this was simply a weather issue. Every grow teaches us something. Grateful for the ride.

Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.

Week 4 has started. Not much to do but wait and see how they turn out now. Everything seems nice and lush. Hoping for a spectacular finish.