The Grow Awards 2026 🏆
Likes
Comments
Share
@Colossus
Follow
Turned today, got impatient to wait another 2 weeks 🤦🏻 Seen some discoloring heading to nutrient burn so ive corrected it all in this new top up (from today) Didnt take too much notice of the room this week, have removed one foam base from the bottom although i maybe should have left them a little closer to the light. Added CYCO Ryzofuel 0-0-0.2 Added Advanced Nute Rhinoskin 0-0-0.4 Does this literally have the same fuel?😂 Cyco runs for first 2 weeks of bloom Rhinoskin runs for 6 weeks. To add overdrive at 6 weeks to week 7 then flush week 8! Im guessing the overall BigBud is 6 to 8 weeks. I will stretch her to 8 weeks. Any tips from here onwards is appreciated 👌 Added a net but im hopeless and with big hands am prone at breaking main stems at this point once LST is applied so i might just leave it as it is until the knuckles form stronger and see how we go!
Likes
2
Share
@JediGrow
Follow
Willkommen in der Käsemanufaktur, die letzten Tage stehen an. Die Trichome sind so gut wie alle milchig, etwa 1/3 der Trichome sind Bernstein. Es wird nur noch mäßig Wasser ohne Dünger gegeben. Die Pflanze hat ein wunderbares skunkiges Aroma entwickelt, am liebsten würde ich in einen Bud beißen :) Ich bin sehr auf den Ertrag gespannt, obwohl die Pflanze nur in einem 3L Airpot stand, sind sehr fette und harte Buds entstanden. Am Montag wird die Pflanze geerntet, dann gibt es ein Update und weitere Bilder.
Likes
7
Share
@grow_rva
Follow
Tied her down as much as possible. Removed any leaves blocking any bud sites. I also removed most of the outside fan leaves for no other reason then they are getting too long, not keeping their hands to themselves. I added a video of the roots this week.
Likes
10
Share
I have a lot of vertical space and little horizontal space, that's why I'm not using networks. Only a central 8 mm iron stake, in the absence of a net, to prevent the weight of the buds from bending the side branches, I am tying them to the central stake with ropes made of “t-shirt rags” (they have just the right elasticity and do not hurt the plants, and I have many old t-shirts, haha). It is an economical and simple, but effective solution. Likewise, for those who do not have horizontal space problems, I recommend using networks! Glueberry OG I'm going to cut it next week (before the rains announced for Monday the 24th. Greetings!
Likes
31
Share
Heeey! 👋 It's week two and everything went quite well I believe! The girls are growing and they look healthy! 💪 During the first days this week and while I was checking them I started to think how I could improve (and fix) what I did in my previous grow, specifically the veg. phase. I wasn't the brightest person in my previous grow because I left the lights at their maximum power during this phase to increase the overall heat of the tent (it was a winter where I live) and while that idea made total sense to me at that time later I found out that was a not the best idea at all 😰. By doing what I did it meant my plants were receiving way more energy they could handle and that meant the plants didn't grow as much as they could 😱😭 So, how could I improve that this time? The best way was to get a PAR meter so I could measure how much light my babies are receiving but those are expensive so the best option after was using the lux meter (or rather the RGB brightness sensor) that's available in my phone (most phones come with one) and by doing that I get a rough idea how much food my babies were receiving (in lux tho, not the best method but it helps to get an idea) 👌 The first days Pistachio and Matcha were getting about 8000 lux and as the week progressed I ended near 18000. Some websites said that amount was acceptable for young plants (they do not talk about the quality of the light tho). For the next week I plan to reach 24000 lux and stay around that 😊 I also think this week I'll move the girls to a slightly bigger pot and with each transplant I'll keep using mycorhizes (Mico Root are mycorhizes) to help the root development. Anyway, that's all for now. Thanks for reading and I hope you'll all enjoy the photos and timelapses I took (the 2nd one looks cool!) Cheers! 😃
Likes
1
Share
Wet Weight: 542,76g ~543g (19,145oz) Dry Weight: 90g Dry Stems: 35,42g Dry Trim: 27,23g Wet Wight to Dry bud factor: 0,1657 = 16,57% Iam fine with the result but i know i can do it better.
Processing
Likes
24
Share
@Saven
Follow
My first grow will be with an autoflower seed from Mephisto Genetics. The strain is Toof Decay. 😁 Planted seed on 06/08, sprouted on 06/12! I'll be documenting everything...including the mistakes. 😅
Likes
6
Share
I was told these seeds are feminized. Also the strain is unknown.
Likes
89
Share
@BioBuds
Follow
This is the sister diary of the Runtz showdown, in which we pit two great performing strains created by two highly acclaimed and respected breeders, in a duel to the death. This diary features the RUNTZ XL AUTO strain by SweetSeeds. In the meantime, all seeds have germinated and seemed to have a level start. Also here we loaded the grow with our magical intentions as we sowed on Imbolc, the celebration day of the Goddess of spring: Bridget. We cant wait to see where this will lead us. Both strains will have the exact same conditions, lighting, care and nutrition. The Lights Also here we use our trusty Mars Hydro SP-3000, where we are trying to get over 600 grams (2x gram per watt) we succeeded almost on the previous grow, where we got to 1.5 grams per watt. We are starting in the regulars when these strains have only 4 to 5 weeks left to go, to double up on the 18hr light schedule. The Soil Our trusty organic super soil recipe which I will include in the images The Genetics SweetSeeds Runtz XL Variety: SWS88 Indica: 47,1% Sativa: 52,5% Ruderalis: 0,4% THC: 17-25% CBD: 0,5% Indoor Yield: 400-550 g/m² Outdoor Yield: 50-175 g/plant Indoor/Outdoor Harvest: 8 weeks from germination Height: 60-120 cm Effects: Relaxing, Stimulating, Creativity Taste: Sweet, Fruity Thank you for following us again and all the support on our previous grows! We love you! Hug Biobuds and Sunshine.
Likes
35
Share
@nonick123
Follow
Día 44 (15/07) Wow! No hay shock de trasplante! 😍💥😁 Todas las ramas se han estirado hacia arriba tras el ajuste de LST y se están formando nuevos nodos rápidamente Esta combinación de nutrientes de Lurpe + substrato de PRO-MIX HP es una maravilla 😍 Día 45 (16/07) Ayer tuvimos ola de calor (37 ºC) y han aguantado muy bien! A última hora de la tarde (cuando ya no había sol directo) les apliqué H2O en spray foliarmente para refrescar los estomas Hoy parece que vuelven las temperaturas estándar para esta época del año: 29 - 30 ºC en las horas centrales del día Riego con 1 litro de H20 pH 6,5 Día 46 (17/07) Pequeños ajustes de LST Hay algunas ramas inferiores que no se han formado / estirado mucho Lo más probable es que haga una buena limpieza este domingo, 7 días después del trasplante, para dejar solo los brotes por encima del 4º nudo Día 47 (18/07) Riego con 0,5 litro de H20 pH 6,5 Este domingo (día 50) haré limpieza de partes bajas y tal vez también de nuevo topping en las 4-6 ramas principales 😁 Día 48 (19/07) Día de muchísimo calor con 37 ºC. A ver como lo llevan! Riego con 0,5 litro de H20 pH 6,5 Día 49 (20/07) Para ayudarles a llevar mejor el calor de las horas centrales del día, coloca una malla de sombreo (70%) sobre el invernadero Lo cierto es que se nota que baja mucho la temperatura debajo de la malla! Van a estar más fresquitas! 😍 Riego con 0,5 litro de H20 pH 6,5 Día 50 (21/07) Training session! Hago limpieza del tercio inferior de la planta, de todas las ramas y nudos que no superan la línea del dosel marcada por el 4º nudo (1er topping) También hago topping (2º) a todas las ramas principales La idea es tener 12 ó 14 colas principales para que no se hagan muy altas De paso saco unos cuantos clones de las ramas inferiores eliminadas 😁💥 Para superar el estrés, hago las siguientes aplicaciones y riego: - Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L - Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Processing
Likes
18
Share
Well this girl has recovered very well she was doing just horrible because I had the lights to low at 22" when 34" was way better . These led lights had me thinking I could go lower then I could ... She is doing great and will be getting the nutrients she needs I'm feeding her a 100% Canadian and organic line that got from a local company .. getting excited to see where we are next week and about do her transplant too. Cheers and thanks for following along .. canna family
Processing
Likes
5
Share
Partiendo una nueva semana vegetativa para nuestras fatbanana de ROYALQUEENSEEDS. Esta semana a sido movida, Trasplantamos, aplicamos apicales y supercropping. Ademas con la defoliación logramos una gran cantidad de nuevos ápices que ya reciben luz más que felices gracias al #spectrumboard de 75w (x2) de HEAVENGROWLIGTH. Alimentadas con WONDERLANDAGRONUTRIENTS.
Processing
Likes
6
Share
Everything seems to be going great! She's developing very fast and looks very good,no problems at the moment,let's see how big she gets before flowering starts we're not very far away from that,I'm enjoying a lot growing her,she's an excellent genetic she's being fed just like every single plant that I grow full organically with mycorrizae by florians living organics bat guano by guanokalong,seaweed powder,lactobacillus microorganisms and love,peace guys ❤️💛💚🌱
Likes
1
Share
Der Skywalker ist ein kräfter Strain und wurde bereits an Tag 10 mit Topping belohnt. 😜
Likes
10
Share
@Shefman93
Follow
5 more weeks left on the schedule for the veg cycle, growth has been amazing with no signs of stress. I am also using recharge at every watering at (1/4) strength.
Likes
6
Share
Had a slight salt build up flushed the girls w drip clean and adjusted the nutes to 700ppm. Run off was around 1800ppm got it down to 850. So far phenos 3 and 4 seem to be the chunkiest though 1 and 2 are stacking pretty nice. Definitely getting a slightly garlicky gassy smell hoping one leans for towards gmo n less fruity/jelly.
Likes
13
Share
@Dynamis
Follow
So this was my First Grow ! I am happy with the results- yes it didn’t yield alot only 40grams (1 plant). The buds arent so dense maybe cause of the strain or maybe the light - the overall color of the flowers is very stunning. The purple hue is simply special and unique. During the grow the temperature was getting too high sometimes reaching 30 celcius :/ this could be the result that affected the yield - in this grow I didn’t gave the plant alot of nutrients since I didn’t want to over feed and ruin my first grow. Also during drying I decided to switch on my dehumidifier and caused the temperature in my room to increase around 27 celcius and humidity down to 45% ( yes its alot ). And so it caused the buds to dry quickly ( yes its bad ) another step i Did is Curing , there is a picture of the jar. I am keeping the humidity in the jar around 55% to 65% keeping it in a dark place. And so Yes - For sure there is room for improvement. Overall i enjoyed growing this strain and definitely i will be growing it again in the future. 💜💨