Recommended
Likes
Comments
Share
This is the last week of flowering in the next couple days I will begin chopping. I cut the blue dream and the Dinafem amnesia cbd auto flowers today since they finished first. Stay tuned for the harvest and weigh in.
Likes
25
Share
Day 58 30/08/24 Friday Feed today using de-chlorinated tap water pH 6 with Plagron products. Day 60 01/09/24 Sunday De-chlorinated tap water pH 6 with calmag today. Picture update ✌️💚 Day 62 03/09/24 Tuesday
Likes
6
Share
Toca cambiar las lamparas que hemos estado utilizando durante el periodo vegetativo, con un espectro lumínico más azul (entre 5000ºK y 6500ºK), por unas mixtas de 2500ºK. Más adelante las cambiaremos por las definitivas 2000ºK. Es importante decir que realizar fotos o videos bajos lamparas de floración, no ofrece un buen resultado... Así que a partir de este momento voy a utilizar un filtro corrector en las imágenes que muestro. Sigo regando cada tres días, alternando entre agua+Bio Rhizotonic+Bio Vega y riegos solo con agua. Llevo un diario de cultivo en una libreta y los principales cambios en una pizarra.
Likes
5
Share
thought i will make the effort and upload the whole diary at once... would be a shame not to have it in my portfolio ;) i'm still amazed by the looks of the buds...fat and sticky- gorilla glue ;) she took my innovations better than expected...not much trim...the whole damn plant is one big fat sticky bud...dry weight of trimmed buds. blew me away!!!! heavy weight auto champion l!!!! hope my meth & fastberry will do as good,
Likes
2
Share
@Takeaims
Follow
I don't see point in close up picture untill around 15days will update in the next few days you don't get much movement or growth
Likes
7
Share
@Thckaos
Follow
01-05-21 Se cambia la solución y se realiza un lavado de raíces. Para bajar la conductividad de las raíces de 1.88 a 0.2 ms para que la solución nueva sea más efectiva. Se corrige el PH a 5.8. La solución tiene 1.99 ms y 5.5 PH. Se añade una pastilla de CO2. 02-05-21 PH 5.9 Conductividad 1.89 ms 03-05-21 Se corrige el PH 5.7 a PH 5.9 Conductividad 1.77 ms 04-05-21 Se corrige el PH 5.4 a PH 5.9 Conductividad 1.87 ms 05-05-21 Se corrige el PH 5.4 a PH 5.9 Conductividad 1.55 ms. Se rellena con agua del grifo ya que el nivel es bajo. 06-05-21 Se corrige el PH 5.1 a PH 6.1 Conductividad 1.85 ms. Se rellena con agua del grifo ya que el nivel es bajo. 07-05-21 PH 6.1 Conductividad 1.50 ms.
Likes
30
Share
This week has been one of great gains in both size and vegetation we have seen a vertical leap in two plants that is astronomical almost 4 inches in a week! Had to do some pruning to expose new bud and a little bit of low stress training on to plants to see if we can expose light to the underside and perhaps get a little more love out of our lower buds The stalk size on almost all of these plants is almost as big as your thumb but on one it is actually relatively skinny that is the one we’re doing the low stress training on we just started the low stress training and it is taking very well to it One of these plants is extremely dark in color on the vegetation and has typically about 11 fingers per leaf! Not sure what that means yet
Likes
151
Share
@BioBuds
Follow
It has been a week of amazing growth for the Xtrakush too. What an amazing plant this is. Resilient, enormous growth, it was only last week that we took out her brother. It turned out to be male, which is why we planted two in one pot. Already she has taken up its space almost entirely. And the bud growth is also something I haven't seen before. This can really turn out to be enormous buds if the buds grow out like advertised. All in all a great week with lots of activity on my part to facilitate these results. We are three weeks into flowering, the deadline I set myself from where I'm allowed defoliating the underside. To prevent stress, but also to maximize growth I hadn't touched them all grow. Also, I made the flowering amendments, it didn't seem they needed anything so I waited a couple of weeks. I made a mix of 2 cups worm castings, 2 cups bonemeal, 1 cup of micro life (per plant) and mixed this. I dropped this on the soil around the stem. In just a day another amazing stretch happened. The combined defoliation and added nutes gave a boost they seemed to love. I watered with a heavy mix of BAC organic flowering, Topmax and Calmag, and a one in 6 mix of my trusty permaculture tea. This SP 3000 is performing so well. Thanks again @MarsHydroLED for letting us try it. We are believers! If you are in the market for a light, give this one a chance!! Thanks again for all the likes, comments and the people following! Only 6 more weeks to go!! Big hug!! Bud
Likes
30
Share
@Fatnastyz
Follow
Week 8 Day 49 Week 3 of flower FINALLY I think shes done stretching!! She definitely went a LOT longer, than I thought. Canopy is broken all to hell, spacing is a little cramped, but it is still working out fantasticly! The buds look like tiny pineapples or cone heads. Let the swell go! Biggest lady yet! Packed her with another 8ml kelp and 1 tsp recharge. 3-13 Day 52 from seed, week 4 flowerish. More so playing with pictures. Very pleased with progress. Buds lookin nice! Enjoy!
Likes
21
Share
Hi to everyone who watches Report. The ninth week of flowering began there. Blueberries look and smell. Deliciously. Follow the advice of the master. I decided not to radically remove the leaves and I removed only the largest ones. I prepare the plants for the log house so I stop using mineral water for a while
Likes
12
Share
MIMOSA by ROYAL QUEEN SEEDS Week #7 overall June 12th-18th Week #6 Veg This week she's doing good after supercropping she also got topped this week. Overall she's a good looking plant no issues to report this week! Stay Growing!! ROYAL QUEEN SEEDS MIMOSA
Likes
13
Share
Plants recovering well …heat is causing some problems in the indica room otherwise all is well …1 more week till flush then 1 more week after that til harvest
Likes
34
Share
Zenzation is fast, very fast, filled and took color quickly and quickly volge at the end. The flowers are full, very full and seem truly succulent, the bassine shape, I spoke many times of the sides that I left then if you want high plants to take advantage of the growboxes in height Make the topping, without LSS and leave only the main line cloning the center. If instead you want a low plant you can leave side that will become very big and do some lst and fimming to keep them low and level them with the center that still weakens. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com
Likes
8
Share
@Kirsten
Follow
14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 17.1.25: I'm quite disappointed that I didn't use a 5 or even better my 10 Gallon pot for PPP2 and even PPP1. Especially the PPP2, which is the Triploid pheno. I'd love to have given her the best conditions to see the full potential! 😕 Obviously, I didn't know when I popped the beans, but it just feels like a wasted opportunity to learn, and that's hard to swallow for me. That's my whole aim with these plants. Despite my regrets in that respect, the plants are both looking great! PPP3 is literally just taking up prime real estate 😑 I can't bring myself to trash a plant, though. Plus, it's interesting in and of itself. Just being as it has stayed so small and only has 3 fingers in any of its leaves in week 10. Continuing to adjust ties and pegs as often as I can, trying not to overdo it. 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️
Likes
7
Share
Lovely weeks weather. Nice growth and lots of bud points. hit 13 hours lights today also which is nice
Likes
19
Share
@Grey_Wolf
Follow
FBT011 Northern Lights From Fastbuds 2nd week of flowering 29th December 2019 Well she's shot up a bit since last weeks update and now sits at 54cm from soil to tip. No noticeable aroma as of yet but there is some resin as the buds feel slightly sticky when gently rubbed. I fed her some Mr B's Green trees Bloom mix and a 1/4 tspoon of Great white. *******As a side note the two cuttings I took have definately taken as they have both started to show their preflowers and have some tiny new growth. So I mmediately sprayed with my STS Reversing Spray ******* Cheers for looking in and I'll be back next week in 2020.
Likes
49
Share
@AsNoriu
Follow
Day 43. Girls will get heavy training later today. They grow ... and because of that i had to move 3 Kushes to other tent and i will make separate diary for theirs flowering time. 3 Auto Blue Tooth by Real Gorilla Seeds took theirs place. After todays training i will give them 4-5 days to recover and will send them to flower hopefully on sunday after 24 hours of darkness. Skunks grow bigger plants, than Cheeses, despite theirs quickest germination and obvious lead in first 3 weeks or so ... Day 46. 3 days left to flower, finally made heavy training, way too busy for LST grows... but result is good, girls hopefully will show off in bloom ! Day 47. Girls loved training, 2 more days, 24 hours darkness and tuesday latest flowering starts. Got full feed of Biobizz, feed charts updated. Next feed = water + silica. Happy Growing !!!
Likes
4
Share
Number 2 pheno might herm on me so I have to watch but I have limited plants and I really want to keep these genetics so I need atleast one female. Number 3 the mutant stopped growing before I topped, or maybe not stopped but it threw out pistils at the apical meristem and not producing leaves so I topped to see if I could promote side growth but it hasn't worked; I'm going to keep her around just for the fun of it. 4 is my hope of producing female and a good clone.
Likes
82
Share
Hello growmies! Welcome to week six of An Epsilon Adventure! Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow! So here we are at week six and every one of these girls are at a slightly different stage, it is quite fascinating to watch them develop one after the other. Today I made the last adjustment to the light possible. I removed the adjustable hangers and affixed a carabiner which I tightly tied to the top of the tent bar. There is about 1.5 inches of space between the top of the shade and the tallest part of the roof of the tent. Plant 1 is already taller than this, and it looks like plant 6 and maybe even plant 5 are going to join it. It's a madness. I am sure you have already looked at the photos but just in case you do what I do and read the diary first... Here is my assessment at the beginning of week 6: Plant 1: Height: 1st (137cm) - what can I say about this ridiculous plant? Day 36... 137cm tall. I have had to raise the light to as high as it is physically possibly to raise it and it's still not high enough. She is done stretching now, she may add 3-5cm over the next week or so but I don't expect more than that, so her top of her main cola going to have to develop above the level of the light. Nothing I can really do, nothing wise anyway. What a monster plant. Maturation: 4th - early into flower - bud sites developing, pistils just starting to explode. Plant 2: Height: 4th (111cm) - this plant has been there or there abouts as the tallest plant for most of the grow, but she has topped out at 111cm. She will gain some during flower but not much more than a few centimetres. Very impressive plant, loads of bud sites, really big strong secondary branches. This one is going to be colas galore. Maturation: 3rd - well into flower - all white pistils Plant 3: Height: 6th (95cm) For some brief days the tallest plant in the room, she peaked early and is now the "shortest" at "only" 95cm for this "50-70cm" strain. She is utterly dwarfed by four of her five sisters in just about every department, being quite a bit smaller even than plant 4 (although I have removed the most lower nodes from this plant). Compared with her sisters she is almost a runt... except that she is 25cm taller than the strain top-end average and matches the maximal height of the previous tallest Epsilon F1 plant I am aware of. It's not that she is small, actually she's pretty big for an Epsilon F1, it's just that the rest of the girls are on another level altogether. Plants 1, 5 and 6 are all absolute beasts. Maturation: 1st - well into flower - first shades of brown in some pistils. Plant 4: Height: 5th (98cm) although only 3cm taller than plant 3, overall she is a much larger plant. Her secondary nodes are the same height as plant 3. Maturation: 2nd - well into flower - all white pistils Plant 5: Height: 3rd (113cm) - one of the two thick/short girls who have grown at a similar pace all along - she is further ahead than plant 6 but not by much and I think she will probably exceed 120cm this week, though I do not think she will outgrow plant 1 or 6. Maturation: 5th - early into flower - bud sites developing. Plant 6: Height: 2nd (120cm) - my predictions were correct about this girl and her continued growth. I now think she might actually outgrow plant 1, which is quite worrying. Maturation: 6th - early into flower - bud sites forming - by far the least mature plant of the six. ### Week 6 Day 2 23:00 30/7 Photographed. Raised the light. Rotated the plants. Inspected, measured and reported on each plant. ### Week 6 Day 3 23:00 31/7 It has not escaped my attention that the plants that are more advanced into flower have darkened and have some burnt tips. I need to flush them and lay off the base nutes a bit. These plants are just growing and maturing so quickly that I cannot keep up. ### Week 6 Day 5 02:30 2/8 Fertigated 3l of nutrient mix, without either COCO A or B. ### Week 6 Day 6 01:30 3/8 photographed --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========