Likes
19
Share
@Sadhus
Follow
– Eternity Grow Cup Zamnesia x Plagron - Semaine : Dernière semaine de floraison (F+9) Variété : Runtz (Zamnesia) Système : Hydro Ebb and Flow Nutrition : Plagron + Terra Aquatica (FinalPart + Green Sensation) Résumé de la semaine Cette dernière semaine de floraison a été dédiée à un rinçage optimisé pour finaliser le cycle de la Runtz de Zamnesia, une variété légendaire issue du croisement de Zkittlez et Gelato. Le système hydroponique Ebb and Flow s’est révélé ultra-efficace, permettant une absorption précise des nutriments et une gestion parfaite du climat, grâce à mon fidèle allié Trolmaster (clin d’œil à eux pour la gestion au poil du climat et des lumières !). Les cinq phénotypes cultivés ont montré une diversité incroyable en termes de structure, taille, couleurs et odeurs, rendant ce run visuellement et olfactivement spectaculaire. Voici les détails de cette semaine cruciale. Paramètres environnementaux Pour maintenir un VPD (Vapor Pressure Deficit) cible de 1,1 kPa, essentiel pour maximiser la production de trichomes tout en minimisant les risques de botrytis, j’ai ajusté les paramètres suivants : Température : 23-24 °C (jour) / 18-20 °C (nuit) Humidité relative : 45-50 % (optimale pour la fin de floraison, réduit les risques de moisissures tout en favorisant la résine) VPD : Maintenu à 1,1 kPa grâce à un contrôle précis via Trolmaster, qui a régulé l’humidificateur et l’extraction pour un équilibre parfait. Éclairage : PPFD (Photosynthetic Photon Flux Density) : 800-1000 µmol/m²/s, ajusté pour éviter le stress lumineux tout en maximisant la photosynthèse. DLI (Daily Light Integral) : 40-50 mol/m²/jour, atteint avec un cycle de 12h/12h sous LEDs full-spectrum, optimisé pour une fin de floraison explosive. Ces conditions ont été idéales pour pousser les plantes à produire des têtes denses et résineuses tout en gardant le botrytis à distance. Nutrition et Rinçage Pour cette dernière semaine, j’ai réduit l’EC de 2,45 mS/cm à 1,3 mS/cm pour amorcer un rinçage efficace, tout en évitant un choc trop violent pour les plantes. J’ai utilisé : Terra Aquatica FinalPart : Pour mobiliser les nutriments restants dans les plantes et optimiser la maturation des têtes. Plagron Green Sensation : Ajouté en faible dose pour booster la production de terpènes et de résine, tout en maintenant la qualité gustative. Le rinçage a été effectué avec une eau osmosée (EC initiale de 0,4 après ajout de Ca/Mg) et un pH ajusté à 5,5-6,0, parfaitement adapté au système hydroponique Ebb and Flow. Cette approche a permis de nettoyer les sels résiduels tout en préservant l’intégrité des trichomes et des arômes. Le système Ebb and Flow a brillé par sa capacité à fournir une irrigation homogène, assurant une fin de cycle sans stress pour les plantes. Observations des phénotypes Les cinq phénotypes de Runtz ont été un véritable festival pour les sens : Structure et taille : Certains phénotypes sont restés compacts (80-100 cm), idéaux pour l’indoor, tandis que d’autres ont atteint 130 cm avec une structure plus élancée. Couleurs : Des teintes vibrantes allant du vert vif aux nuances pourpres, avec des pistils orange flamboyants et une couche de trichomes givrés qui scintille sous les LEDs. Odeurs : La diversité terpénique est incroyable ! Selon les phénotypes, on passe d’arômes sucrés de melon et de fraise à des notes plus funky de fromage affiné ou même une touche surprenante de pieds (merci au caryophyllène et au limonène pour ce spectacle olfactif !). Les trichomes sont à leur apogée : environ 70 % laiteux, 20-25 % ambrés et encore 5-10 % transparents, signe que la récolte est imminente. L’observation au microscope révèle des têtes de trichomes bien gonflées, prêtes à offrir un maximum de puissance et de saveur. Les principaux terpènes identifiés (limonène, caryophyllène, linalool, humulène) confèrent à la Runtz son profil aromatique complexe : fruité, sucré, avec des touches terreuses et épicées, parfait pour une expérience sensorielle mémorable. Conclusion Ce run de Runtz pour l’Eternity Grow Cup Zamnesia x Plagron a été tout simplement exceptionnel. Les plantes sont magnifiques, avec des têtes denses, colorées et débordantes de résine. Tout s’est déroulé à merveille, du contrôle du climat (merci Trolmaster pour la précision chirurgicale !) à la gestion des nutriments avec Plagron et Terra Aquatica. La diversité des phénotypes a ajouté une dimension passionnante à ce projet, chaque plante étant une œuvre d’art à part entière. Un immense merci à Zamnesia et Plagron pour l’organisation de ce concours, qui a permis de mettre en lumière le potentiel de cette génétique incroyable et des produits de qualité. Vivement la récolte et le curing pour découvrir le plein potentiel de ces beautés ! 🌱🔥 #EternityGrowCup #Zamnesia #Plagron #Trolmaster
Likes
13
Share
@Andres
Follow
She is growing strong and healthy...maybe 2 or 3 week more...
Likes
10
Share
chopped on 11/19/2021 after wet trim got 604 grams of flower and 61 grams of trim
Likes
4
Share
Hi guys it’s been 2 weeks since the last update. She has been growing at a nice steady pace. Not too much lateral growth but she is getting wider. Have used a few garden stakes for lst & have been leaf tucking and defoliating selectively. She is also in pre flower low lights already at 24/0 and have been giving a P/K spike in her nutrition to initiate flower. She is responding well to the feeds. No topping so she will be growing in all her glory how she is meant to grow. She’s stout and bushy and hasn’t given me any problems at all. Leaves are a nice rich green so she is all good no deficiency that I’ve noticed. What a strain! This was the first Autoflower I ever grew some years back so this is sentimental to me. I’ll be back next week now that we are off to the races. Thanks to fastbuds for the genetics. Won’t let you guys down Let’s grow!!!!
Likes
45
Share
@Krisis
Follow
04/22/25. Start of week 8 flower. Uh.. apparently I took way too many pictures lol. Oops. Couldn’t help it.. she’s photogenic I guess. Anyway, getting some new pretty colors now and her pistils are darkening up a lot more now. Also getting some foxtailing on the two tallest buds. Probably getting light blasted a bit much, but they’re quite a bit taller than the rest.. and I don’t want them lacking, so it is what it is. I gave her food a couple days ago, but I’ll be looking at her trichs to see where she’s at. I’m guessing she still has a bit to go, but guessing isn’t gonna do it- pistils have lied to me before. I’ve seen a bit of white in them before and had amber trichs. My guess is that the next update will not be a harvest. Guess we will see. ✌️
Likes
21
Share
@gr3g4l
Follow
con 64 dias y viendo el estado de los tricomas diría que voy a empezar a regar con agua sola , unas 3 veces más en el que añadiré en el riego Dos de acido cítrico por uno acido ascórbico y en 7 -10 dias cosecharé.
Likes
28
Share
1st of December harvest 10 Days dry time 31 days in curing phase (as im writing this) Dry time was 9-10 days (Depending on the size of the buds) Humidity 51% RH Temperature 15C https://www.youtube.com/watch?v=JBNeJTwUOFY&ab_channel=MedicinalGenomics (Found a lot of good science to back up a dry and cure method) Curing is still an ongoing process and the bud gets better with time. But as in now, 31 days later in cure, the buds taste fantastic, smell amazing and the smoke feels smooth. I am still amazed how the ladies bounced back after a chaotic 2-3 first week of veg. Big thanks to everyone who have been supporting, a very good learning experience. THC 22%
Likes
41
Share
Welcome to my Auto Cinderella Jack(s) grows from Dutch-Passion. Both ladies have been on water for 10 days. The synthetic got a hard flush and the organic was soft flushed (water for 10days to rid of excess nutrients in soil) Was such a pleasure to grow both girls. The organic has lovely bright orange hairs with very dense hard big buds. Calyxes are nice and big with a nice leaf to calyx ratio. (Not much to trim)...The Synthetic girl has a completely different structure. Has shorter buds, that are very dense and has a lot more frost. Has lovely hints of purple throughout it. All buds are lovely and tight/dense and very stinky and sticky. Both plants needed the full dose of the FC 3000 and I've no doubt that I'd of gotten a different bud structure deeper into the canopy. (Its not larf) just not as hard the deeper down into the canopy, (some of the bud) All ladies (autos) have been in a dark rest 24hrs now and will get another 24hrs in a dark tent. Hoping to see glistening resin upon harvesting. Plants will be harvested in this grow week and dried, then after I taste and get the measure of both plants as for quality I'll rate them then. HARVEST DAY. 48Hr rest. And they nice and glistening. Glad I rested them. You really can see the resin. I harvested whole. Pult the whole plant(s) up from the stem and broke away the clay and took the main roots that come from the stem. The organic, boy, she was bet in. Took me all my strength to break away her main roots. They were mm thick. Very nice root structure also. The synthic, the soil just broke apart before I could take out upon my pulling..put my back into it thinking would be the same. Strong, but nowhere near as good a root zone as the nearly all organic beat her hands down. As for bud size, she took that to. They equally smell very fruity and have a very light gasey smell. But very fruity. More that than anything. I'm sure I'll put my finger on it as the days go by. Let's hope they both dry nice and I can keep a steady temperature. (REMINDER if room drying this time of Yr. Turn off your radiators) More pics to come and info on how the process is going.. Thanks for dropping by. Be sure to like so I can visit your diaries. Either way thanks for dropping by.
Likes
27
Share
Habe sie diese woche in ein scrog netz eingeflochten, sie kommen sehr schön
Likes
93
Share
Wo wo wo....stop everyone, friends! Stop for a second and admire my central zkittez that seems to be turning into a Christmas tree 😋 Very satisfied with this flowering start Many greetings and good harvests for all
Likes
2
Share
@Valedor
Follow
vamos a poner a lavar las raíces de las White Widow y la Mamá mía ya están listas, el sistema Critical sigue en floración la Swiss cheese esta imprable, tiene muy grandes sus pistilos y huele bastante bien
Likes
67
Share
@Hashy
Follow
Grow diary 11. This grow I'm running 4 diaries, one for each strain in the tent. So my plan is instead of a week being 7 days, my weeks are most likely going to be every 10 days. I think I'm going to take pictures every 5 days so there is a mid week and end week shot. I'm germinating in my propagation tent which is secret jardin dp60. I soaked the seeds in water for 15 hours. The seeds sank so i took that as a good sign. After the seed had soaked for 15 hours I then soaked the rockwool cube for 30 mins in PH 5.8 water with 0.5ml/L hydroguard. Gave the cube a shake and let it drain for 30 mins before placing the seed pointy side down so the top of the seed is level with the cube. Covered seed with a loose bit of rockwool. Placed into propagator with the sunblaster t5 lights on constant. After 71 hours the seed popped TEMP MAX 34.2C AVG 30.1C MIN 25.8C HUMID MAX 86.3% AVG 80.3% MIN 57.2% VPD MAX 2.07 AVG 0.83 MIN 0.64 Hopefully back in 10 days.
Likes
123
Share
Well My friends gave me a bigger tent so I got a little more time to let them develop! I'm very ready to take them down just waiting a bit longer for a few more amber trichomes. I'm still feeding them ripen but i wish last week i'd given them a feed in addition too. They look nice in the new tent, there is loads more room, and while the lighting didn't go up as much as I'd like, They have a nice big fan oscillating on them now and room to stretch. ________________________________________________________________ I suppose I'm glad I waited. I wanted to take a few more pics and get one last video in! I'm def seeing a bit more amber in the trics and i think it will make em a bit better for these 2 extra waterings! Probably gonna chop them soon!!!!
Likes
8
Share
Week 18 Daylight 12h40 - ☀️7h40/20h20🌙 🌈Weather changed a lot during this 2 week, alternating sun and rain with medium temperature: low in the morning 8°C and 22/24°C the afternoon. Cold wind: Autumn is coming soon! 🍃 This is the middle of the flowering cycle for 2 plants and the beginning for the others; and it’s harder than I imagined. Interminable war against pests: caterpillars and leafminer flies (+ guest :aphids). However the environment is clean, there is some sticky traps, ventilation and preventives treatments (Neem Oil, Garlic/Laurel) but infestation are a recurring problem 😩. Majors reasons of the proliferation are the hot temperatures in greenhouse, the quasi inexistants natural predators, humidity, plants proximity. September is the reproduction period of the cabbage looper: a butterfly which lays eggs on plants giving some hungry caterpillars. Some others pests are attracted by the nitrogen added in soil (batguano) I did a serious defoliation, continue to check the plants morning and night to catch intruders, sprayed regularly with Neem oil. For the moment the flowering continues. -Brake Pad Breath: plant has definitely changed of physiognomy, branches are covered by a lots of resinous flowers with a pretty good smell. Indica dominance. Around 3 or 4 weeks till the harvest. It will be long: the plant is a victim of pests and caterpillars and lots of leaves are damaged. -Flash Back#2: elegant plant, pretty good flowering since 3 weeks. Globally healthy despite of the pests aggression. Sativa dominance with long internodes distance and a vigorous stretch. -GMO x Zombie Kush: same difficulties against predators, late flowering, just initiated the flowering process but in a good way. -Royal Moby: the tallest one; around 170cm, not really adapted to dimensions of the growing space and not discrete. Plants was really shocked during the first wave of pests and after the sunburn. Late flowering, Sativa. 💦Watering : 2L/plants/48h -grower Master Floraison + Enyme -grower Master Floraison + pk 13/14 -grower Master Floraison + Cal/Mag
Processing
Likes
1
Share
Likes
3
Share
@Cultiv8or
Follow
Brought them inside this week and borrowed a Dehumidifyer. I’ve been able to get RH , 45-55 now and the resin production has already started increasing